London · England
Lighting bollard installation in Havering
Lighting bollards supplied and fitted in Havering, London: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageHavering lighting bollards
We supply and fit lighting bollards throughout Havering, typically for sites such as school gates, hospital approaches and mews courtyards. Low-level LED bollard lights for paths, car parks, entrances and gardens, installed with a qualified electrician.
We cover Havering's RM14, RM11, RM12, RM2, RM3 and RM1 postcode districts, including places such as Upminster, Hornchurch, North Ockendon and Romford. Nearby, we also work in South Ockendon (3.8 miles), Barking and Dagenham (4.3 miles), Brentwood (4.9 miles) and Grays (6.6 miles), measured as the crow flies.
Local details
- Area
- London, England
- Highway authority
- Havering Council (local roads)
- Planning authority
- Havering Council
- Postcodes
- RM14, RM11, RM12, RM2, RM3, RM1, RM13 and RM7
- Guide price
- Typically £395–£1,395 per bollard + VAT (£465–£1,645 inc VAT for homes); minimum job £965
- Survey
- Free, with a fixed written quote
- Nearby
- South Ockendon (3.8 mi), Barking and Dagenham (4.3 mi), Brentwood (4.9 mi), Grays (6.6 mi)
What Havering sites use lighting bollards for
Around Havering, lighting bollards usually solve one of these:
- Footpaths through housing developments and campuses
- Private gardens and long driveways
- Parks and areas where tall columns would be intrusive
Lighting bollard prices in Havering
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £395–£805 + VAT · £465–£965 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £695–£1,095 + VAT · £825–£1,295 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £985–£1,395 + VAT · £1,195–£1,645 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, installed with a qualified electrician (supply run extra); +15% for London. Guide only — the fixed price follows a survey.
Consents, ground and services in Havering
The highway authority for local roads in Havering is Havering Council; motorways and trunk roads sit with National Highways. Red routes are managed by Transport for London. Lighting bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
If your site in Havering is listed or inside a conservation area, check with the local planning authority (Havering Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Cable trenches run between every position and back to the supply, often crossing paths, drives and planting, so the routes are planned to minimise cuts through hard surfaces and to avoid existing gas, water and telecoms services. Cable is protected by armour or duct, buried deep enough to avoid garden tools and future paving works, and marked with warning tape.
- Limit glare and upward light, and check for any planning or ecology conditions on lighting near sensitive habitats.
- Where bollards light a public route, check the lighting levels the site owner or designer requires.
How the job runs
Set the bases
Anchor cages or foundations are cast at each position with the cable entry in the right place, set level so each bollard stands plumb.
Electrical connection
A qualified electrician installs the circuit protection, makes the connections in weatherproof enclosures and fits controls such as a photocell or timer.
Test, aim and certify
The circuit is tested and certified, bollards are checked at night for coverage and glare, and asymmetric heads are turned to face the path.
Choosing the right spec
| Option | Detail |
|---|---|
| Light distribution | 360-degree, asymmetric or louvred heads to light paths while limiting glare and light spill. |
| Solar bollards | Self-contained with panel and battery; no cabling. Suited to markers and low-use routes where lower output is acceptable. |
| Colour temperature | Warm white for residential and amenity areas; warmer or amber options near sensitive wildlife habitats. |
What affects the quote
Two Havering jobs with the same number of posts can price quite differently. The usual reasons:
- Controls such as photocells, timers or sensors
- Distance from the supply and circuit requirements
- Reinstatement of paving, tarmac or planting
Keeping them working
A periodic electrical inspection checks that connections and protection are still sound. LED lighting bollards need far less maintenance than older lamp types, but they are not maintenance-free.
We can also service, repair or replace existing posts anywhere in Havering.
Questions about lighting bollards in Havering
Which parts of Havering do you cover for lighting bollards?
We cover all of Havering (RM14, RM11, RM12, RM2, RM3 and RM1) and the rest of London. We also work in South Ockendon, Barking and Dagenham and Brentwood.
Do I need consent for lighting bollards on a public footway in Havering?
The highway authority for local roads in Havering is Havering Council; motorways and trunk roads sit with National Highways. Red routes are managed by Transport for London. Lighting bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
What's a typical price for lighting bollards in Havering?
In Havering, typically £395–£1,395 per bollard, installed with a qualified electrician (supply run extra), plus VAT (£465–£1,645 including VAT for homeowners), with a minimum job of £965 plus VAT, using our London guide prices. The fixed figure comes in writing after we've seen the site.
What IP rating do outdoor bollard lights need?
Usually at least IP65 for rain and splashing, and higher where water may collect or fittings are hosed down. Ask for the rating of the complete fitting, not just the LED module.
Can bollard lights work on a timer or motion sensor?
Yes. Photocells switch them on at dusk, timers switch them off or dim them late at night and motion sensors bring them up when someone approaches. Combining controls saves energy and reduces light pollution.
Lighting bollards near Havering
- South Ockendon (3.8 mi)
- Barking and Dagenham (4.3 mi)
- Brentwood (4.9 mi)
- Grays (6.6 mi)
- Dartford (7.9 mi)
- Redbridge (7.9 mi)