Swansea · Wales
Pedestrian protection bollards in Gorseinon
Local installation of pedestrian protection bollards in Gorseinon — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageAbout pedestrian protection bollards in Gorseinon
We supply and fit pedestrian protection bollards throughout Gorseinon, typically for sites such as community buildings, small industrial units and high street shopfronts. Bollards that separate people from vehicles at car parks, forecourts, walkways, drive-thrus and shop entrances.
We work across SA4 — Gorseinon itself and places including Pontarddulais, Penllergaer, Pen-clawdd and Three Crosses. Jobs in Gorseinon can be combined with work in Llanelli (5.2 miles), Swansea (5.4 miles), Clydach (6.1 miles) and Ammanford (8.8 miles) (straight-line distances). Gorseinon is about 5 miles from Swansea.
Gorseinon at a glance
- Area
- Swansea, Wales
- Highway authority
- Swansea Council (local roads)
- Planning authority
- Swansea Council
- Postcodes
- SA4
- Guide price
- Typically £235–£1,145 per bollard + VAT; minimum job £575
- Survey
- Free, with a fixed written quote
Where pedestrian protection bollards go in around Gorseinon
Common uses in a place like Gorseinon:
- EV charging points and trolley shelters
- Petrol station forecourts and kiosk frontages
- Drive-thru lanes and order points next to seating
What pedestrian protection bollards cost in Gorseinon
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £235–£625 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £515–£905 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £795–£1,145 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; -3% for Wales. Guide only — the fixed price follows a survey.
Before we dig in Gorseinon
Local roads and pavements in Gorseinon are the responsibility of Swansea Council as highway authority, with the Welsh Government's trunk road agents handling trunk roads. Posts on the public highway need that authority's consent; private land does not.
If your site in Gorseinon is listed or inside a conservation area, check with the local planning authority (Swansea Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Positions are scanned and hand-dug before committing, and foundations are sized for the ground found rather than a fixed hole size. Raised kerbs also change the picture: a high kerb slows a wheel but does not stop a bumper, so the post still needs to sit within reach of the overhang rather than behind it.
- Keep clear gaps of typically at least 1,000–1,200 mm and keep main walkways wide enough, referring to Inclusive Mobility guidance.
- Use contrasting bands so posts are visible to partially sighted people, and avoid linking chains across routes.
What happens on site
Excavate and set
Each position is cut, dug and checked for services, and the posts are set plumb in concrete to a consistent height.
Add bands and markings
Reflective bands are fitted and any wheel stops or line markings agreed in the scheme are installed.
Agree a plan for live trading
Work is phased so entrances and walkways stay open, with each section fenced while it is dug and set. Busy sites often prefer early starts or quieter weekdays.
Finishes and options
| Option | Detail |
|---|---|
| Visibility bands | Reflective and contrasting bands help drivers and partially sighted pedestrians see posts. |
| Wheel stops and kerbs | Used with bollards to stop cars before they reach the posts, reducing daily knocks. |
| Stainless or architectural finishes | Stainless sleeves or decorative posts for shop entrances and public-facing frontages. |
Pricing pedestrian protection bollards in Gorseinon
Our Wales guide prices are a starting point; the survey in Gorseinon firms them up. What tends to move them:
- Working around trading hours and live car parks
- Ground conditions and services along kerb lines
- Unrated steel or PAS 170-1 tested products
After installation
Touch up chipped coatings, renew faded bands, and check the surface around each base for cracks that suggest movement. If one post keeps being hit, look at the bay layout or add a wheel stop rather than replacing the same post repeatedly.
We can also service, repair or replace existing posts anywhere in Gorseinon.
Questions about pedestrian protection bollards in Gorseinon
Do you install pedestrian protection bollards in Gorseinon?
We cover all of Gorseinon (SA4) and the rest of Swansea. We also work in Llanelli, Swansea and Clydach.
Do I need consent for pedestrian protection bollards on a public footway in Gorseinon?
Local roads and pavements in Gorseinon are the responsibility of Swansea Council as highway authority, with the Welsh Government's trunk road agents handling trunk roads. Posts on the public highway need that authority's consent; private land does not.
How much do pedestrian protection bollards cost in Gorseinon?
In Gorseinon, typically £235–£1,145 per bollard, supplied and installed, plus VAT, with a minimum job of £575 plus VAT, using our Wales guide prices. The fixed figure comes in writing after we've seen the site.
Should bollards be added at a drive-thru order point?
Often, yes, where people queue or sit beside the lane. Posts should follow the curve of the lane and be closest together at corners, where drivers tend to misjudge the turn. The positions are agreed on site with the operator.
How far from the kerb should car park bollards go?
Far enough back that parked bumpers do not hit them, but not so far that they narrow the walkway. That distance depends on the bay length and kerb height. We set it on site with the layout in front of us.
Pedestrian protection near Gorseinon
- Llanelli (5.2 mi)
- Swansea (5.4 mi)
- Clydach (6.1 mi)
- Ammanford (8.8 mi)
- Neath (10.2 mi)
- Port Talbot (11.8 mi)