Bridgend · Wales
Ram-raid protection bollards in Maesteg
Local installation of ram-raid bollards in Maesteg — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageRam-raid bollards in Maesteg
In the town of Maesteg, ram-raid bollards tend to go in at high street shopfronts, small industrial units and filling-station forecourts. Bollards fitted in front of shopfronts, ATMs, jewellers and convenience stores to stop vehicles being used to break in.
Coverage in Maesteg takes in the CF34 postcode district and nearby places like Pont Rhyd-y-cyff and Llangynwyd. Nearby, we also work in Port Talbot (6.2 miles), Pyle (6.6 miles), Neath (7.3 miles) and Bridgend (7.9 miles), measured as the crow flies. Swansea is around 12 miles away.
Maesteg at a glance
- Area
- Bridgend, Wales
- Highway authority
- Bridgend County Borough Council (local roads)
- Planning authority
- Bridgend County Borough Council
- Postcodes
- CF34
- Guide price
- Typically £385–£1,445 per bollard + VAT; minimum job £915
- Survey
- Free, with a fixed written quote
- Nearby
- Port Talbot (6.2 mi), Pyle (6.6 mi), Neath (7.3 mi), Bridgend (7.9 mi)
Maesteg: typical ram-raid bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £385–£835 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £705–£1,145 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £1,045–£1,445 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; -3% for Wales. Guide only — the fixed price follows a survey.
Ram-raid bollards in Maesteg: common uses
Around Maesteg, ram-raid bollards usually solve one of these:
- Warehouses and trade counters with roller-shutter entrances
- Convenience stores and off-licences with glazed frontages
- Premises that have already been targeted once
What we check first in Maesteg
Local roads and pavements in Maesteg are the responsibility of Bridgend County Borough Council as highway authority, with the Welsh Government's trunk road agents handling trunk roads. Posts on the public highway need that authority's consent; private land does not.
Many private-land installations in Maesteg need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at Bridgend County Borough Council before posts go in.
Shop forecourts may be thin concrete over old fill, and filling station forecourts carry fuel lines, tank vents and interceptors that must be located precisely before anything is dug. We hand-dig near known services, adjust positions if a vault or duct is found, and reinstate the surface to match, whether that is slabs, block paving, asphalt or a sealed forecourt finish.
- Check who owns the ground in front of the shop; if it is public highway, the highway authority's agreement is needed.
- Leave clear gaps for wheelchairs and buggies, typically at least 1,000 mm, and keep the footway width usable, referring to Inclusive Mobility guidance.
What happens on site
Agree the post type and positions
We agree unrated or tested posts with you, your landlord and any insurer or security adviser involved. A fixed written quote sets out the positions, foundations and reinstatement.
Arrange consents
If the posts will stand on public highway, the highway authority's agreement is needed before work starts. Landlord consent is usually needed for leased units.
Reinstate the pavement
Paving, tarmac or forecourt concrete is made good flush with the base of each post, leaving no trip edges.
Choosing the right spec
| Option | Detail |
|---|---|
| Concrete-filled steel posts | Thick-walled steel tube root-fixed in a deep reinforced base. The usual unrated choice for shopfronts and ATMs. |
| Crash-rated bollards | Tested to IWA 14-1, ISO 22343-1 or PAS 68 for high-value premises or where a vehicle could build up speed. |
| PAS 170-1 tested bollards | Tested against low-speed vehicle impacts and suited to ram-raid risks where a tested product is requested. |
What affects the quote
Two Maesteg jobs with the same number of posts can price quite differently. The usual reasons:
- Removable positions and their locks
- Foundation depth and what is found under the pavement
- Unrated, PAS 170-1 or crash-rated product
Keeping them working
Ram-raid bollards are robust but not maintenance-free. Check them after any knock, because a post that has been hit may have cracked its foundation even if it still looks straight.
For damaged or loose posts in Maesteg, repairs and replacements are priced in writing first.
Common questions
Can you install ram-raid bollards anywhere in Maesteg?
We cover all of Maesteg (CF34) and the rest of Bridgend. We also work in Port Talbot, Pyle and Neath.
Do I need consent for ram-raid bollards on a public footway in Maesteg?
In Maesteg the highway authority for local roads is Bridgend County Borough Council. We confirm whether the ground is adopted highway before quoting, because ram-raid bollards on a public footway need its agreement first.
How much do ram-raid bollards cost in Maesteg?
In Maesteg, typically £385–£1,445 per bollard, supplied and installed, plus VAT, with a minimum job of £915 plus VAT, using our Wales guide prices. The fixed figure comes in writing after we've seen the site.
Will bollards stop an ATM being ripped out?
Correctly placed bollards stop a vehicle getting close enough to attach chains or ram the surround. They work alongside the machine's own anchoring and the bank's security measures. Positions need to cover the wall either side of the ATM as well as the front.
How many bollards does a shopfront need?
Enough to leave no gap a car could pass through across the vulnerable part of the frontage. For a typical small shop that is often three to five posts, but it depends on the frontage width and where a vehicle could approach from. The survey sets the number.