Ceredigion · Wales
Ram-raid protection bollards in Aberystwyth
Local installation of ram-raid bollards in Aberystwyth — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageRam-raid bollards in Aberystwyth
Across Aberystwyth, typical sites for ram-raid bollards include high street shopfronts, filling-station forecourts and town-centre squares. Bollards fitted in front of shopfronts, ATMs, jewellers and convenience stores to stop vehicles being used to break in.
We cover Aberystwyth's SY23 and SY24 postcode districts, including places such as Llanbadarn Fawr, Penrhyn-coch, Llanfarian and Llanrhystud. There are no other towns of Aberystwyth's size close by, so crews travel in specifically for jobs here.
Aberystwyth at a glance
- Area
- Ceredigion, Wales
- Highway authority
- Ceredigion County Council (local roads)
- Planning authority
- Ceredigion County Council
- Postcodes
- SY23 and SY24
- Guide price
- Typically £385–£1,445 per bollard + VAT; minimum job £915
- Survey
- Free, with a fixed written quote
Guide prices for Aberystwyth
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £385–£835 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £705–£1,145 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £1,045–£1,445 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; -3% for Wales. Guide only — the fixed price follows a survey.
Ram-raid bollards in Aberystwyth: common uses
Common uses in a place like Aberystwyth:
- Jewellers, pawnbrokers and phone shops holding high-value stock
- Premises that have already been targeted once
- Warehouses and trade counters with roller-shutter entrances
What we check first in Aberystwyth
In Aberystwyth the highway authority for local roads is Ceredigion County Council. We confirm whether the ground is adopted highway before quoting, because ram-raid bollards on a public footway need its agreement first.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (Ceredigion County Council) first — we flag this at survey.
We hand-dig near known services, adjust positions if a vault or duct is found, and reinstate the surface to match, whether that is slabs, block paving, asphalt or a sealed forecourt finish. Deep foundations need care near the building's own footings and basement walls.
- Check who owns the ground in front of the shop; if it is public highway, the highway authority's agreement is needed.
- In conservation areas or on listed buildings, ask the local planning authority whether consent is needed.
Installation, step by step
Look at how a vehicle would approach
At the free site survey we look at where a vehicle could reverse from, the kerb line, the forecourt and the frontage construction. Ownership of the pavement in front of the shop is checked at the same time.
Arrange consents
If the posts will stand on public highway, the highway authority's agreement is needed before work starts. Landlord consent is usually needed for leased units.
Excavate and set the posts
Each position is hand-dug near services and taken to depth, then the post is set plumb in a reinforced concrete base. Work is planned around trading hours where possible.
Finishes and options
| Option | Detail |
|---|---|
| Reflective and contrasting bands | Bands near the top help pedestrians, including partially sighted people, see the posts on a busy pavement. |
| Removable posts | Lockable removable positions allow deliveries, shopfitting or shutter maintenance without leaving the frontage open permanently. |
| Stainless or decorative covers | Covers over steel cores for shopping streets and branded frontages where plain steel would look out of place. |
What affects the quote
When we price ram-raid bollards in Aberystwyth, these make the biggest difference:
- Unrated, PAS 170-1 or crash-rated product
- Number of posts across the frontage or ATM
- Removable positions and their locks
After installation
If you have been raided despite having bollards, look again at the positions and gaps, because offenders tend to aim at any weak point. Check them after any knock, because a post that has been hit may have cracked its foundation even if it still looks straight.
We can also service, repair or replace existing posts anywhere in Aberystwyth.
Common questions
Do you install ram-raid bollards in Aberystwyth?
We cover all of Aberystwyth (SY23 and SY24) and the rest of Ceredigion.
Who gives permission for bollards on the pavement in Aberystwyth?
In Aberystwyth the highway authority for local roads is Ceredigion County Council. We confirm whether the ground is adopted highway before quoting, because ram-raid bollards on a public footway need its agreement first.
What's a typical price for ram-raid bollards in Aberystwyth?
In Aberystwyth, typically £385–£1,445 per bollard, supplied and installed, plus VAT, with a minimum job of £915 plus VAT, using our Wales guide prices. The fixed figure comes in writing after we've seen the site.
How many bollards does a shopfront need?
Enough to leave no gap a car could pass through across the vulnerable part of the frontage. For a typical small shop that is often three to five posts, but it depends on the frontage width and where a vehicle could approach from. The survey sets the number.
Will bollards stop an ATM being ripped out?
Correctly placed bollards stop a vehicle getting close enough to attach chains or ram the surround. They work alongside the machine's own anchoring and the bank's security measures. Positions need to cover the wall either side of the ATM as well as the front.