East Sussex · England
Ram-raid protection bollards in Eastbourne
Local installation of ram-raid bollards in Eastbourne — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageAbout ram-raid bollards in Eastbourne
Bollards fitted in front of shopfronts, ATMs, jewellers and convenience stores to stop vehicles being used to break in. In Eastbourne, that tends to mean sites such as leisure centres, retail parks and business parks.
Coverage in Eastbourne takes in the BN21, BN22, BN20 and BN23 postcode districts and nearby places like Willingdon and Crumbles. Nearby, we also work in Hailsham (6.6 miles), Seaford (7.9 miles), Bexhill-on-Sea (9.9 miles) and Hastings (14.2 miles), measured as the crow flies. It sits roughly 19 miles from Brighton as the crow flies.
Eastbourne at a glance
- Area
- East Sussex, England
- Highway authority
- East Sussex County Council (local roads)
- Planning authority
- the council for Eastbourne
- Postcodes
- BN21, BN22, BN20 and BN23
- Guide price
- Typically £415–£1,595 per bollard + VAT; minimum job £995
- Survey
- Free, with a fixed written quote
- Nearby
- Hailsham (6.6 mi), Seaford (7.9 mi), Bexhill-on-Sea (9.9 mi), Hastings (14.2 mi)
Where ram-raid bollards go in around Eastbourne
Common uses in a place like Eastbourne:
- Pharmacies and late-opening premises
- Convenience stores and off-licences with glazed frontages
- Through-the-wall and freestanding ATMs
Eastbourne: typical ram-raid bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £415–£905 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £765–£1,245 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £1,095–£1,595 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; +6% for South East. Guide only — the fixed price follows a survey.
Before we dig in Eastbourne
East Sussex County Council is the highway authority covering Eastbourne's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
Many private-land installations in Eastbourne need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at the council for Eastbourne before posts go in.
We hand-dig near known services, adjust positions if a vault or duct is found, and reinstate the surface to match, whether that is slabs, block paving, asphalt or a sealed forecourt finish. Shop forecourts may be thin concrete over old fill, and filling station forecourts carry fuel lines, tank vents and interceptors that must be located precisely before anything is dug.
- Leave clear gaps for wheelchairs and buggies, typically at least 1,000 mm, and keep the footway width usable, referring to Inclusive Mobility guidance.
- Check who owns the ground in front of the shop; if it is public highway, the highway authority's agreement is needed.
Installation, step by step
Agree the post type and positions
We agree unrated or tested posts with you, your landlord and any insurer or security adviser involved. A fixed written quote sets out the positions, foundations and reinstatement.
Arrange consents
If the posts will stand on public highway, the highway authority's agreement is needed before work starts. Landlord consent is usually needed for leased units.
Excavate and set the posts
Each position is hand-dug near services and taken to depth, then the post is set plumb in a reinforced concrete base. Work is planned around trading hours where possible.
Finishes and options
| Option | Detail |
|---|---|
| Removable posts | Lockable removable positions allow deliveries, shopfitting or shutter maintenance without leaving the frontage open permanently. |
| PAS 170-1 tested bollards | Tested against low-speed vehicle impacts and suited to ram-raid risks where a tested product is requested. |
| Reflective and contrasting bands | Bands near the top help pedestrians, including partially sighted people, see the posts on a busy pavement. |
What affects the quote
When we price ram-raid bollards in Eastbourne, these make the biggest difference:
- Removable positions and their locks
- Number of posts across the frontage or ATM
- Foundation depth and what is found under the pavement
After installation
Keep visibility bands clean, repaint chips before rust sets in on steel, and keep locks on removable posts lubricated so staff can actually use them. Ram-raid bollards are robust but not maintenance-free.
If posts in Eastbourne are later hit or damaged, we can repair or replace them — see bollard repairs.
Common questions
Which parts of Eastbourne do you cover for ram-raid bollards?
We cover all of Eastbourne (BN21, BN22, BN20 and BN23) and the rest of East Sussex. We also work in Hailsham, Seaford and Bexhill-on-Sea.
Do I need consent for ram-raid bollards on a public footway in Eastbourne?
The highway authority for local roads in Eastbourne is East Sussex County Council; motorways and trunk roads sit with National Highways. Ram-raid bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
How much do ram-raid bollards cost in Eastbourne?
In Eastbourne, typically £415–£1,595 per bollard, supplied and installed, plus VAT, with a minimum job of £995 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
How many bollards does a shopfront need?
Enough to leave no gap a car could pass through across the vulnerable part of the frontage. For a typical small shop that is often three to five posts, but it depends on the frontage width and where a vehicle could approach from. The survey sets the number.
Can bollards go on the pavement outside my shop?
Only if you own the ground or have the highway authority's agreement. Many shop frontages include a strip of private forecourt, which is simpler. We check ownership as part of the survey.
Ram-raid bollards near Eastbourne
- Hailsham (6.6 mi)
- Seaford (7.9 mi)
- Bexhill-on-Sea (9.9 mi)
- Hastings (14.2 mi)
- Rottingdean (15.3 mi)
- Brighton (19 mi)