Essex · England
Ram-raid protection bollards in Braintree
Ram-raid bollards for sites across Braintree and the rest of Essex, from the first measurement to the last relaid paving block.
Computer-generated imageBraintree ram-raid bollards
Across Braintree, typical sites for ram-raid bollards include schools, town-centre squares and high street shopfronts. Bollards fitted in front of shopfronts, ATMs, jewellers and convenience stores to stop vehicles being used to break in.
We cover Braintree's CM7 and CM77 postcode districts, including places such as Great Bardfield, Finchingfield, Panfield and Wethersfield. Nearby, we also work in Witham (6.6 miles), Chelmsford (10.5 miles), Maldon (11.4 miles) and Sudbury (13.4 miles), measured as the crow flies. Braintree is about 25 miles from Southend-on-Sea.
Local details
- Area
- Essex, England
- Highway authority
- Essex County Council (local roads)
- Planning authority
- the council for Braintree
- Postcodes
- CM7 and CM77
- Guide price
- Typically £405–£1,545 per bollard + VAT; minimum job £965
- Survey
- Free, with a fixed written quote
- Nearby
- Witham (6.6 mi), Chelmsford (10.5 mi), Maldon (11.4 mi), Sudbury (13.4 mi)
Guide prices for Braintree
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £405–£885 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £745–£1,245 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £1,095–£1,545 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; +3% for East of England. Guide only — the fixed price follows a survey.
Typical ram-raid bollards jobs in Braintree
Common uses in a place like Braintree:
- Warehouses and trade counters with roller-shutter entrances
- Filling station kiosks and forecourt shops
- Pharmacies and late-opening premises
Consents, ground and services in Braintree
Essex County Council is the highway authority covering Braintree's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
If your site in Braintree is listed or inside a conservation area, check with the local planning authority (the council for Braintree) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Shop forecourts may be thin concrete over old fill, and filling station forecourts carry fuel lines, tank vents and interceptors that must be located precisely before anything is dug. Deep foundations need care near the building's own footings and basement walls.
- If an insurer has asked for protection, confirm what standard or product they expect before ordering.
- In conservation areas or on listed buildings, ask the local planning authority whether consent is needed.
Installation, step by step
Look at how a vehicle would approach
At the free site survey we look at where a vehicle could reverse from, the kerb line, the forecourt and the frontage construction. Ownership of the pavement in front of the shop is checked at the same time.
Agree the post type and positions
We agree unrated or tested posts with you, your landlord and any insurer or security adviser involved. A fixed written quote sets out the positions, foundations and reinstatement.
Excavate and set the posts
Each position is hand-dug near services and taken to depth, then the post is set plumb in a reinforced concrete base. Work is planned around trading hours where possible.
Specification choices
| Option | Detail |
|---|---|
| Removable posts | Lockable removable positions allow deliveries, shopfitting or shutter maintenance without leaving the frontage open permanently. |
| Concrete-filled steel posts | Thick-walled steel tube root-fixed in a deep reinforced base. The usual unrated choice for shopfronts and ATMs. |
| PAS 170-1 tested bollards | Tested against low-speed vehicle impacts and suited to ram-raid risks where a tested product is requested. |
What affects the quote
When we price ram-raid bollards in Braintree, these make the biggest difference:
- Out-of-hours working to avoid closing the shop
- Foundation depth and what is found under the pavement
- Number of posts across the frontage or ATM
Keeping them working
Ram-raid bollards are robust but not maintenance-free. Keep visibility bands clean, repaint chips before rust sets in on steel, and keep locks on removable posts lubricated so staff can actually use them.
We can also service, repair or replace existing posts anywhere in Braintree.
Common questions
Which parts of Braintree do you cover for ram-raid bollards?
We cover all of Braintree (CM7 and CM77) and the rest of Essex. We also work in Witham, Chelmsford and Maldon.
Who gives permission for bollards on the pavement in Braintree?
The highway authority for local roads in Braintree is Essex County Council; motorways and trunk roads sit with National Highways. Ram-raid bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
How much do ram-raid bollards cost in Braintree?
In Braintree, typically £405–£1,545 per bollard, supplied and installed, plus VAT, with a minimum job of £965 plus VAT, using our East of England guide prices. The fixed figure comes in writing after we've seen the site.
What is PAS 170-1 and do I need it?
PAS 170-1 is a standard for testing vehicle security barriers against low-speed impacts. It suits ram-raid risks where someone has asked for tested performance, such as an insurer or security adviser. If nobody has asked for a tested product, a well-founded unrated post is often adequate.
Can bollards go on the pavement outside my shop?
Only if you own the ground or have the highway authority's agreement. Many shop frontages include a strip of private forecourt, which is simpler. We check ownership as part of the survey.
Ram-raid bollards near Braintree
- Witham (6.6 mi)
- Chelmsford (10.5 mi)
- Maldon (11.4 mi)
- Sudbury (13.4 mi)
- Haverhill (14.9 mi)
- Colchester (15 mi)