Essex · England
Ram-raid protection bollards in Wickford
Ram-raid bollards supplied and fitted in Wickford, Essex: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageAbout ram-raid bollards in Wickford
We supply and fit ram-raid bollards throughout Wickford, typically for sites such as community car parks, town-centre squares and small industrial units. Bollards fitted in front of shopfronts, ATMs, jewellers and convenience stores to stop vehicles being used to break in.
Coverage in Wickford takes in the SS12 and SS11 postcode districts and nearby places like Nevendon. Jobs in Wickford can be combined with work in Pitsea (3.3 miles), Rayleigh (3.9 miles), Basildon (4.1 miles) and South Benfleet (4.3 miles) (straight-line distances). It sits roughly 10 miles from Southend-on-Sea as the crow flies.
Wickford at a glance
- Area
- Essex, England
- Highway authority
- Essex County Council (local roads)
- Planning authority
- the council for Basildon
- Postcodes
- SS12 and SS11
- Guide price
- Typically £405–£1,545 per bollard + VAT; minimum job £965
- Survey
- Free, with a fixed written quote
- Nearby
- Pitsea (3.3 mi), Rayleigh (3.9 mi), Basildon (4.1 mi), South Benfleet (4.3 mi)
Ram-raid bollard prices in Wickford
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £405–£885 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £745–£1,245 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £1,095–£1,545 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; +3% for East of England. Guide only — the fixed price follows a survey.
Ram-raid bollards in Wickford: common uses
Common uses in a place like Wickford:
- Premises that have already been targeted once
- Convenience stores and off-licences with glazed frontages
- Filling station kiosks and forecourt shops
Before we dig in Wickford
The highway authority for local roads in Wickford is Essex County Council; motorways and trunk roads sit with National Highways. Ram-raid bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (the council for Basildon) first — we flag this at survey.
Shop forecourts may be thin concrete over old fill, and filling station forecourts carry fuel lines, tank vents and interceptors that must be located precisely before anything is dug. Deep foundations need care near the building's own footings and basement walls.
- In conservation areas or on listed buildings, ask the local planning authority whether consent is needed.
- If an insurer has asked for protection, confirm what standard or product they expect before ordering.
Installation, step by step
Agree the post type and positions
We agree unrated or tested posts with you, your landlord and any insurer or security adviser involved. A fixed written quote sets out the positions, foundations and reinstatement.
Arrange consents
If the posts will stand on public highway, the highway authority's agreement is needed before work starts. Landlord consent is usually needed for leased units.
Excavate and set the posts
Each position is hand-dug near services and taken to depth, then the post is set plumb in a reinforced concrete base. Work is planned around trading hours where possible.
Specification choices
| Option | Detail |
|---|---|
| Crash-rated bollards | Tested to IWA 14-1, ISO 22343-1 or PAS 68 for high-value premises or where a vehicle could build up speed. |
| Removable posts | Lockable removable positions allow deliveries, shopfitting or shutter maintenance without leaving the frontage open permanently. |
| Stainless or decorative covers | Covers over steel cores for shopping streets and branded frontages where plain steel would look out of place. |
What affects the quote
Two Wickford jobs with the same number of posts can price quite differently. The usual reasons:
- Unrated, PAS 170-1 or crash-rated product
- Number of posts across the frontage or ATM
- Out-of-hours working to avoid closing the shop
Looking after them
If you have been raided despite having bollards, look again at the positions and gaps, because offenders tend to aim at any weak point. Check them after any knock, because a post that has been hit may have cracked its foundation even if it still looks straight.
For damaged or loose posts in Wickford, repairs and replacements are priced in writing first.
Ram-raid bollards in Wickford: FAQs
Which parts of Wickford do you cover for ram-raid bollards?
We cover all of Wickford (SS12 and SS11) and the rest of Essex. We also work in Pitsea, Rayleigh and Basildon.
Do I need consent for ram-raid bollards on a public footway in Wickford?
Essex County Council is the highway authority covering Wickford's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
What's a typical price for ram-raid bollards in Wickford?
In Wickford, typically £405–£1,545 per bollard, supplied and installed, plus VAT, with a minimum job of £965 plus VAT, using our East of England guide prices. The fixed figure comes in writing after we've seen the site.
How many bollards does a shopfront need?
Enough to leave no gap a car could pass through across the vulnerable part of the frontage. For a typical small shop that is often three to five posts, but it depends on the frontage width and where a vehicle could approach from. The survey sets the number.
Can bollards go on the pavement outside my shop?
Only if you own the ground or have the highway authority's agreement. Many shop frontages include a strip of private forecourt, which is simpler. We check ownership as part of the survey.
Ram-raid bollards near Wickford
- Pitsea (3.3 mi)
- Rayleigh (3.9 mi)
- Basildon (4.1 mi)
- South Benfleet (4.3 mi)
- Billericay (4.6 mi)
- Canvey Island (6.6 mi)