Hampshire · England
Ram-raid protection bollards in Aldershot
Ram-raid bollards for sites across Aldershot and the rest of Hampshire, from the first measurement to the last relaid paving block.
Computer-generated imageAldershot ram-raid bollards
Across Aldershot, typical sites for ram-raid bollards include small industrial units, filling-station forecourts and schools. Bollards fitted in front of shopfronts, ATMs, jewellers and convenience stores to stop vehicles being used to break in.
We cover every part of Aldershot in the GU11 postcode district. We also cover neighbouring Farnham (2.8 miles), Farnborough (3.2 miles), Fleet (3.9 miles) and Camberley (6.2 miles) — distances are straight-line. Aldershot is about 17 miles from Reading.
Key facts for this area
- Area
- Hampshire, England
- Highway authority
- Hampshire County Council (local roads)
- Planning authority
- the council for Rushmoor
- Postcodes
- GU11
- Guide price
- Typically £415–£1,595 per bollard + VAT; minimum job £995
- Survey
- Free, with a fixed written quote
- Nearby
- Farnham (2.8 mi), Farnborough (3.2 mi), Fleet (3.9 mi), Camberley (6.2 mi)
Guide prices for Aldershot
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £415–£905 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £765–£1,245 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £1,095–£1,595 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; +6% for South East. Guide only — the fixed price follows a survey.
Ram-raid bollards in Aldershot: common uses
Common uses in a place like Aldershot:
- Warehouses and trade counters with roller-shutter entrances
- Filling station kiosks and forecourt shops
- Pharmacies and late-opening premises
Before we dig in Aldershot
The highway authority for local roads in Aldershot is Hampshire County Council; motorways and trunk roads sit with National Highways. Ram-raid bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (the council for Rushmoor) first — we flag this at survey.
Deep foundations need care near the building's own footings and basement walls. Shop forecourts may be thin concrete over old fill, and filling station forecourts carry fuel lines, tank vents and interceptors that must be located precisely before anything is dug.
- Leave clear gaps for wheelchairs and buggies, typically at least 1,000 mm, and keep the footway width usable, referring to Inclusive Mobility guidance.
- Check who owns the ground in front of the shop; if it is public highway, the highway authority's agreement is needed.
Installation, step by step
Look at how a vehicle would approach
At the free site survey we look at where a vehicle could reverse from, the kerb line, the forecourt and the frontage construction. Ownership of the pavement in front of the shop is checked at the same time.
Agree the post type and positions
We agree unrated or tested posts with you, your landlord and any insurer or security adviser involved. A fixed written quote sets out the positions, foundations and reinstatement.
Reinstate the pavement
Paving, tarmac or forecourt concrete is made good flush with the base of each post, leaving no trip edges.
Choosing the right spec
| Option | Detail |
|---|---|
| PAS 170-1 tested bollards | Tested against low-speed vehicle impacts and suited to ram-raid risks where a tested product is requested. |
| Removable posts | Lockable removable positions allow deliveries, shopfitting or shutter maintenance without leaving the frontage open permanently. |
| Concrete-filled steel posts | Thick-walled steel tube root-fixed in a deep reinforced base. The usual unrated choice for shopfronts and ATMs. |
Pricing ram-raid bollards in Aldershot
Two Aldershot jobs with the same number of posts can price quite differently. The usual reasons:
- Covers and finishes for shopping streets
- Number of posts across the frontage or ATM
- Foundation depth and what is found under the pavement
Keeping them working
If you have been raided despite having bollards, look again at the positions and gaps, because offenders tend to aim at any weak point. Ram-raid bollards are robust but not maintenance-free.
If posts in Aldershot are later hit or damaged, we can repair or replace them — see bollard repairs.
Questions about ram-raid bollards in Aldershot
Which parts of Aldershot do you cover for ram-raid bollards?
We cover all of Aldershot (GU11) and the rest of Hampshire. We also work in Farnham, Farnborough and Fleet.
Do I need consent for ram-raid bollards on a public footway in Aldershot?
Hampshire County Council is the highway authority covering Aldershot's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
How much do ram-raid bollards cost in Aldershot?
In Aldershot, typically £415–£1,595 per bollard, supplied and installed, plus VAT, with a minimum job of £995 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
Will bollards spoil the look of the shop?
They change the frontage, but stainless or powder-coated finishes in shopfront colours can make them look deliberate rather than defensive. Many shopping streets already have similar posts, so new ones can be matched to what is there.
Will bollards stop an ATM being ripped out?
Correctly placed bollards stop a vehicle getting close enough to attach chains or ram the surround. They work alongside the machine's own anchoring and the bank's security measures. Positions need to cover the wall either side of the ATM as well as the front.
Ram-raid bollards in nearby towns
- Farnham (2.8 mi)
- Farnborough (3.2 mi)
- Fleet (3.9 mi)
- Camberley (6.2 mi)
- Sandhurst (6.9 mi)
- Yateley (7.1 mi)