Hampshire · England
Ram-raid protection bollards in Gosport
Planning ram-raid bollards in Gosport? We check ownership, consents and buried services first, then quote a fixed price.
Computer-generated imageRam-raid bollards in Gosport
We supply and fit ram-raid bollards throughout Gosport, typically for sites such as college campuses, leisure centres and retail parks. Bollards fitted in front of shopfronts, ATMs, jewellers and convenience stores to stop vehicles being used to break in.
Coverage in Gosport takes in the PO12 and PO13 postcode districts and nearby places like Lee-on-the-Solent. We also cover neighbouring Portsmouth (1.7 miles), Fareham (4.5 miles), Waterlooville (7.3 miles) and Havant (7.6 miles) — distances are straight-line.
Gosport at a glance
- Area
- Hampshire, England
- Highway authority
- Hampshire County Council (local roads)
- Planning authority
- the council for Gosport
- Postcodes
- PO12 and PO13
- Guide price
- Typically £415–£1,595 per bollard + VAT; minimum job £995
- Survey
- Free, with a fixed written quote
- Nearby
- Portsmouth (1.7 mi), Fareham (4.5 mi), Waterlooville (7.3 mi), Havant (7.6 mi)
What ram-raid bollards cost in Gosport
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £415–£905 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £765–£1,245 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £1,095–£1,595 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; +6% for South East. Guide only — the fixed price follows a survey.
Where ram-raid bollards go in around Gosport
Typical reasons Gosport sites choose ram-raid bollards:
- Filling station kiosks and forecourt shops
- Warehouses and trade counters with roller-shutter entrances
- Premises that have already been targeted once
Before we dig in Gosport
The highway authority for local roads in Gosport is Hampshire County Council; motorways and trunk roads sit with National Highways. Ram-raid bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (the council for Gosport) first — we flag this at survey.
Shop forecourts may be thin concrete over old fill, and filling station forecourts carry fuel lines, tank vents and interceptors that must be located precisely before anything is dug. Shopfronts often sit over cellars, coal holes, vaults and service entries, so what lies under the pavement can be more complicated than it looks.
- Check who owns the ground in front of the shop; if it is public highway, the highway authority's agreement is needed.
- Leave clear gaps for wheelchairs and buggies, typically at least 1,000 mm, and keep the footway width usable, referring to Inclusive Mobility guidance.
How the job runs
Look at how a vehicle would approach
At the free site survey we look at where a vehicle could reverse from, the kerb line, the forecourt and the frontage construction. Ownership of the pavement in front of the shop is checked at the same time.
Arrange consents
If the posts will stand on public highway, the highway authority's agreement is needed before work starts. Landlord consent is usually needed for leased units.
Reinstate the pavement
Paving, tarmac or forecourt concrete is made good flush with the base of each post, leaving no trip edges.
Finishes and options
| Option | Detail |
|---|---|
| Removable posts | Lockable removable positions allow deliveries, shopfitting or shutter maintenance without leaving the frontage open permanently. |
| Reflective and contrasting bands | Bands near the top help pedestrians, including partially sighted people, see the posts on a busy pavement. |
| Concrete-filled steel posts | Thick-walled steel tube root-fixed in a deep reinforced base. The usual unrated choice for shopfronts and ATMs. |
What affects the quote
Two Gosport jobs with the same number of posts can price quite differently. The usual reasons:
- Removable positions and their locks
- Number of posts across the frontage or ATM
- Covers and finishes for shopping streets
Looking after them
Ram-raid bollards are robust but not maintenance-free. Check them after any knock, because a post that has been hit may have cracked its foundation even if it still looks straight.
If posts in Gosport are later hit or damaged, we can repair or replace them — see bollard repairs.
Common questions
Can you install ram-raid bollards anywhere in Gosport?
We cover all of Gosport (PO12 and PO13) and the rest of Hampshire. We also work in Portsmouth, Fareham and Waterlooville.
Who gives permission for bollards on the pavement in Gosport?
The highway authority for local roads in Gosport is Hampshire County Council; motorways and trunk roads sit with National Highways. Ram-raid bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
How much do ram-raid bollards cost in Gosport?
In Gosport, typically £415–£1,595 per bollard, supplied and installed, plus VAT, with a minimum job of £995 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
Can bollards go on the pavement outside my shop?
Only if you own the ground or have the highway authority's agreement. Many shop frontages include a strip of private forecourt, which is simpler. We check ownership as part of the survey.
What is PAS 170-1 and do I need it?
PAS 170-1 is a standard for testing vehicle security barriers against low-speed impacts. It suits ram-raid risks where someone has asked for tested performance, such as an insurer or security adviser. If nobody has asked for a tested product, a well-founded unrated post is often adequate.
Ram-raid bollards in nearby towns
- Portsmouth (1.7 mi)
- Fareham (4.5 mi)
- Waterlooville (7.3 mi)
- Havant (7.6 mi)
- Hythe (12.7 mi)
- Southampton (14.2 mi)