Herefordshire · England
Ram-raid protection bollards in Hereford
Ram-raid bollards for sites across Hereford and the rest of Herefordshire, from the first measurement to the last relaid paving block.
Computer-generated imageRam-raid bollards in Hereford
Ram-raid bollards suit plenty of Hereford sites, community car parks, high street shopfronts and small industrial units among them. Bollards fitted in front of shopfronts, ATMs, jewellers and convenience stores to stop vehicles being used to break in.
Coverage in Hereford takes in the HR1, HR4 and HR2 postcode districts and nearby places like Bartestree, Sutton St Nicholas, Fownhope and Bodenham. Jobs in Hereford can be combined with work in Leominster (11.7 miles) and Great Malvern (17 miles) (straight-line distances).
Hereford at a glance
- Area
- Herefordshire, England
- Highway authority
- Herefordshire Council (local roads)
- Planning authority
- Herefordshire Council
- Postcodes
- HR1, HR4 and HR2
- Guide price
- Typically £395–£1,495 per bollard + VAT; minimum job £945
- Survey
- Free, with a fixed written quote
- Nearby
- Leominster (11.7 mi), Great Malvern (17 mi)
Typical ram-raid bollards jobs in Hereford
Typical reasons Hereford sites choose ram-raid bollards:
- Filling station kiosks and forecourt shops
- Premises that have already been targeted once
- Jewellers, pawnbrokers and phone shops holding high-value stock
Hereford: typical ram-raid bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £395–£855 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £725–£1,195 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £1,045–£1,495 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Consents, ground and services in Hereford
In Hereford, work on adopted pavements and verges needs consent from Herefordshire Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (Herefordshire Council) first — we flag this at survey.
Shop forecourts may be thin concrete over old fill, and filling station forecourts carry fuel lines, tank vents and interceptors that must be located precisely before anything is dug. Deep foundations need care near the building's own footings and basement walls.
- If an insurer has asked for protection, confirm what standard or product they expect before ordering.
- Leave clear gaps for wheelchairs and buggies, typically at least 1,000 mm, and keep the footway width usable, referring to Inclusive Mobility guidance.
Installation, step by step
Agree the post type and positions
We agree unrated or tested posts with you, your landlord and any insurer or security adviser involved. A fixed written quote sets out the positions, foundations and reinstatement.
Excavate and set the posts
Each position is hand-dug near services and taken to depth, then the post is set plumb in a reinforced concrete base. Work is planned around trading hours where possible.
Reinstate the pavement
Paving, tarmac or forecourt concrete is made good flush with the base of each post, leaving no trip edges.
Choosing the right spec
| Option | Detail |
|---|---|
| PAS 170-1 tested bollards | Tested against low-speed vehicle impacts and suited to ram-raid risks where a tested product is requested. |
| Stainless or decorative covers | Covers over steel cores for shopping streets and branded frontages where plain steel would look out of place. |
| Removable posts | Lockable removable positions allow deliveries, shopfitting or shutter maintenance without leaving the frontage open permanently. |
Pricing ram-raid bollards in Hereford
When we price ram-raid bollards in Hereford, these make the biggest difference:
- Out-of-hours working to avoid closing the shop
- Unrated, PAS 170-1 or crash-rated product
- Covers and finishes for shopping streets
Keeping them working
If you have been raided despite having bollards, look again at the positions and gaps, because offenders tend to aim at any weak point. Ram-raid bollards are robust but not maintenance-free.
For damaged or loose posts in Hereford, repairs and replacements are priced in writing first.
Ram-raid bollards in Hereford: FAQs
Which parts of Hereford do you cover for ram-raid bollards?
We cover all of Hereford (HR1, HR4 and HR2) and the rest of Herefordshire. We also work in Leominster and Great Malvern.
Who gives permission for bollards on the pavement in Hereford?
Herefordshire Council is the highway authority covering Hereford's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
What's a typical price for ram-raid bollards in Hereford?
In Hereford, typically £395–£1,495 per bollard, supplied and installed, plus VAT, with a minimum job of £945 plus VAT, using our West Midlands guide prices. The fixed figure comes in writing after we've seen the site.
What is PAS 170-1 and do I need it?
PAS 170-1 is a standard for testing vehicle security barriers against low-speed impacts. It suits ram-raid risks where someone has asked for tested performance, such as an insurer or security adviser. If nobody has asked for a tested product, a well-founded unrated post is often adequate.
Will bollards stop an ATM being ripped out?
Correctly placed bollards stop a vehicle getting close enough to attach chains or ram the surround. They work alongside the machine's own anchoring and the bank's security measures. Positions need to cover the wall either side of the ATM as well as the front.