Hertfordshire · England
Ram-raid protection bollards in Hemel Hempstead
Ram-raid bollards for sites across Hemel Hempstead and the rest of Hertfordshire, from the first measurement to the last relaid paving block.
Computer-generated imageAbout ram-raid bollards in Hemel Hempstead
Across Hemel Hempstead, typical sites for ram-raid bollards include town-centre streets, college campuses and leisure centres. Bollards fitted in front of shopfronts, ATMs, jewellers and convenience stores to stop vehicles being used to break in.
We work across HP2, HP3, HP1 and WD4 — Hemel Hempstead itself and places including Jockey End, Bovingdon, Hogpits Bottom and Bulstrode. Jobs in Hemel Hempstead can be combined with work in Berkhamsted (5 miles), St Albans (5 miles), Harpenden (5.9 miles) and Watford (7.2 miles) (straight-line distances). Hemel Hempstead is about 9 miles from Luton.
Local details
- Area
- Hertfordshire, England
- Highway authority
- Hertfordshire County Council (local roads)
- Planning authority
- the council for Dacorum
- Postcodes
- HP2, HP3, HP1 and WD4
- Guide price
- Typically £415–£1,595 per bollard + VAT; minimum job £995
- Survey
- Free, with a fixed written quote
- Nearby
- Berkhamsted (5 mi), St Albans (5 mi), Harpenden (5.9 mi), Watford (7.2 mi)
Hemel Hempstead: typical ram-raid bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £415–£905 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £765–£1,245 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £1,095–£1,595 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; +6% for South East. Guide only — the fixed price follows a survey.
What Hemel Hempstead sites use ram-raid bollards for
Typical reasons Hemel Hempstead sites choose ram-raid bollards:
- Warehouses and trade counters with roller-shutter entrances
- Convenience stores and off-licences with glazed frontages
- Through-the-wall and freestanding ATMs
Before we dig in Hemel Hempstead
Hertfordshire County Council is the highway authority covering Hemel Hempstead's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (the council for Dacorum) first — we flag this at survey.
We hand-dig near known services, adjust positions if a vault or duct is found, and reinstate the surface to match, whether that is slabs, block paving, asphalt or a sealed forecourt finish. Shop forecourts may be thin concrete over old fill, and filling station forecourts carry fuel lines, tank vents and interceptors that must be located precisely before anything is dug.
- In conservation areas or on listed buildings, ask the local planning authority whether consent is needed.
- Check who owns the ground in front of the shop; if it is public highway, the highway authority's agreement is needed.
What happens on site
Look at how a vehicle would approach
At the free site survey we look at where a vehicle could reverse from, the kerb line, the forecourt and the frontage construction. Ownership of the pavement in front of the shop is checked at the same time.
Agree the post type and positions
We agree unrated or tested posts with you, your landlord and any insurer or security adviser involved. A fixed written quote sets out the positions, foundations and reinstatement.
Arrange consents
If the posts will stand on public highway, the highway authority's agreement is needed before work starts. Landlord consent is usually needed for leased units.
Options to consider
| Option | Detail |
|---|---|
| PAS 170-1 tested bollards | Tested against low-speed vehicle impacts and suited to ram-raid risks where a tested product is requested. |
| Crash-rated bollards | Tested to IWA 14-1, ISO 22343-1 or PAS 68 for high-value premises or where a vehicle could build up speed. |
| Reflective and contrasting bands | Bands near the top help pedestrians, including partially sighted people, see the posts on a busy pavement. |
What affects the quote
Our South East guide prices are a starting point; the survey in Hemel Hempstead firms them up. What tends to move them:
- Covers and finishes for shopping streets
- Unrated, PAS 170-1 or crash-rated product
- Reinstatement of forecourt or natural stone surfaces
Looking after them
Keep visibility bands clean, repaint chips before rust sets in on steel, and keep locks on removable posts lubricated so staff can actually use them. Check them after any knock, because a post that has been hit may have cracked its foundation even if it still looks straight.
For damaged or loose posts in Hemel Hempstead, repairs and replacements are priced in writing first.
Questions about ram-raid bollards in Hemel Hempstead
Do you install ram-raid bollards in Hemel Hempstead?
We cover all of Hemel Hempstead (HP2, HP3, HP1 and WD4) and the rest of Hertfordshire. We also work in Berkhamsted, St Albans and Harpenden.
Who gives permission for bollards on the pavement in Hemel Hempstead?
The highway authority for local roads in Hemel Hempstead is Hertfordshire County Council; motorways and trunk roads sit with National Highways. Ram-raid bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
What's a typical price for ram-raid bollards in Hemel Hempstead?
In Hemel Hempstead, typically £415–£1,595 per bollard, supplied and installed, plus VAT, with a minimum job of £995 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
What is PAS 170-1 and do I need it?
PAS 170-1 is a standard for testing vehicle security barriers against low-speed impacts. It suits ram-raid risks where someone has asked for tested performance, such as an insurer or security adviser. If nobody has asked for a tested product, a well-founded unrated post is often adequate.
Will bollards stop an ATM being ripped out?
Correctly placed bollards stop a vehicle getting close enough to attach chains or ram the surround. They work alongside the machine's own anchoring and the bank's security measures. Positions need to cover the wall either side of the ATM as well as the front.
Ram-raid bollards near Hemel Hempstead
- Berkhamsted (5 mi)
- St Albans (5 mi)
- Harpenden (5.9 mi)
- Watford (7.2 mi)
- Chesham (7.4 mi)
- Rickmansworth (8 mi)