Lancashire · England
Ram-raid protection bollards in Preston
Planning ram-raid bollards in Preston? We check ownership, consents and buried services first, then quote a fixed price.
Computer-generated imagePreston ram-raid bollards
We supply and fit ram-raid bollards throughout Preston, typically for sites such as university campuses, pedestrianised streets and office forecourts. Bollards fitted in front of shopfronts, ATMs, jewellers and convenience stores to stop vehicles being used to break in.
Coverage in Preston takes in the PR1 and PR2 postcode districts and nearby places like Fulwood, Grimsargh, Cow Hill and Haighton Green. We also cover neighbouring Leyland (4.5 miles), Chorley (8.6 miles), Blackburn (9.1 miles) and Darwen (10.8 miles) — distances are straight-line. Preston is about 27 miles from Liverpool.
Local details
- Area
- Lancashire, England
- Highway authority
- Lancashire County Council (local roads)
- Planning authority
- the council for Preston
- Postcodes
- PR1 and PR2
- Guide price
- Typically £385–£1,445 per bollard + VAT; minimum job £925
- Survey
- Free, with a fixed written quote
Where ram-raid bollards go in around Preston
Typical reasons Preston sites choose ram-raid bollards:
- Through-the-wall and freestanding ATMs
- Pharmacies and late-opening premises
- Premises that have already been targeted once
Preston: typical ram-raid bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £385–£835 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £715–£1,145 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £1,045–£1,445 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; -2% for North West. Guide only — the fixed price follows a survey.
Consents, ground and services in Preston
The highway authority for local roads in Preston is Lancashire County Council; motorways and trunk roads sit with National Highways. Ram-raid bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (the council for Preston) first — we flag this at survey.
We hand-dig near known services, adjust positions if a vault or duct is found, and reinstate the surface to match, whether that is slabs, block paving, asphalt or a sealed forecourt finish. Shop forecourts may be thin concrete over old fill, and filling station forecourts carry fuel lines, tank vents and interceptors that must be located precisely before anything is dug.
- Ask your landlord, and check any lease restrictions on alterations to the frontage.
- Leave clear gaps for wheelchairs and buggies, typically at least 1,000 mm, and keep the footway width usable, referring to Inclusive Mobility guidance.
Installation, step by step
Look at how a vehicle would approach
At the free site survey we look at where a vehicle could reverse from, the kerb line, the forecourt and the frontage construction. Ownership of the pavement in front of the shop is checked at the same time.
Arrange consents
If the posts will stand on public highway, the highway authority's agreement is needed before work starts. Landlord consent is usually needed for leased units.
Excavate and set the posts
Each position is hand-dug near services and taken to depth, then the post is set plumb in a reinforced concrete base. Work is planned around trading hours where possible.
Choosing the right spec
| Option | Detail |
|---|---|
| Stainless or decorative covers | Covers over steel cores for shopping streets and branded frontages where plain steel would look out of place. |
| Crash-rated bollards | Tested to IWA 14-1, ISO 22343-1 or PAS 68 for high-value premises or where a vehicle could build up speed. |
| PAS 170-1 tested bollards | Tested against low-speed vehicle impacts and suited to ram-raid risks where a tested product is requested. |
What moves the price in Preston
When we price ram-raid bollards in Preston, these make the biggest difference:
- Covers and finishes for shopping streets
- Removable positions and their locks
- Reinstatement of forecourt or natural stone surfaces
Looking after them
Check them after any knock, because a post that has been hit may have cracked its foundation even if it still looks straight. Ram-raid bollards are robust but not maintenance-free.
We can also service, repair or replace existing posts anywhere in Preston.
Questions about ram-raid bollards in Preston
Which parts of Preston do you cover for ram-raid bollards?
We cover all of Preston (PR1 and PR2) and the rest of Lancashire. We also work in Leyland, Chorley and Blackburn.
Who gives permission for bollards on the pavement in Preston?
The highway authority for local roads in Preston is Lancashire County Council; motorways and trunk roads sit with National Highways. Ram-raid bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
What's a typical price for ram-raid bollards in Preston?
In Preston, typically £385–£1,445 per bollard, supplied and installed, plus VAT, with a minimum job of £925 plus VAT, using our North West guide prices. The fixed figure comes in writing after we've seen the site.
Can bollards go on the pavement outside my shop?
Only if you own the ground or have the highway authority's agreement. Many shop frontages include a strip of private forecourt, which is simpler. We check ownership as part of the survey.
Can we still take deliveries through the front?
Yes, if one or more positions are removable. Staff unlock and lift out the post for deliveries, then refit it. The socket is designed to sit flush when the post is out.
Ram-raid bollards in nearby towns
- Leyland (4.5 mi)
- Chorley (8.6 mi)
- Blackburn (9.1 mi)
- Darwen (10.8 mi)
- Lytham St Annes (12 mi)
- Accrington (14.1 mi)