Lancashire · England
Ram-raid protection bollards in Skelmersdale
Ram-raid bollards for sites across Skelmersdale and the rest of Lancashire, from the first measurement to the last relaid paving block.
Computer-generated imageSkelmersdale ram-raid bollards
Across Skelmersdale, typical sites for ram-raid bollards include small industrial units, high street shopfronts and town-centre squares. Bollards fitted in front of shopfronts, ATMs, jewellers and convenience stores to stop vehicles being used to break in.
We cover Skelmersdale's WN8 postcode district, including places such as Up Holland, Parbold, Blaguegate and Hill Dale. Nearby, we also work in Ormskirk (4.6 miles), Wigan (5.6 miles), Kirkby (6.8 miles) and Ashton-in-Makerfield (7 miles), measured as the crow flies. Skelmersdale is about 13 miles from Liverpool.
Key facts for this area
- Area
- Lancashire, England
- Highway authority
- Lancashire County Council (local roads)
- Planning authority
- the council for West Lancashire
- Postcodes
- WN8
- Guide price
- Typically £385–£1,445 per bollard + VAT; minimum job £925
- Survey
- Free, with a fixed written quote
- Nearby
- Ormskirk (4.6 mi), Wigan (5.6 mi), Kirkby (6.8 mi), Ashton-in-Makerfield (7 mi)
Ram-raid bollards in Skelmersdale: common uses
Common uses in a place like Skelmersdale:
- Through-the-wall and freestanding ATMs
- Filling station kiosks and forecourt shops
- Warehouses and trade counters with roller-shutter entrances
Guide prices for Skelmersdale
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £385–£835 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £715–£1,145 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £1,045–£1,445 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; -2% for North West. Guide only — the fixed price follows a survey.
Permissions and groundwork in Skelmersdale
Lancashire County Council is the highway authority covering Skelmersdale's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
If your site in Skelmersdale is listed or inside a conservation area, check with the local planning authority (the council for West Lancashire) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Shop forecourts may be thin concrete over old fill, and filling station forecourts carry fuel lines, tank vents and interceptors that must be located precisely before anything is dug. Deep foundations need care near the building's own footings and basement walls.
- Leave clear gaps for wheelchairs and buggies, typically at least 1,000 mm, and keep the footway width usable, referring to Inclusive Mobility guidance.
- In conservation areas or on listed buildings, ask the local planning authority whether consent is needed.
How the job runs
Look at how a vehicle would approach
At the free site survey we look at where a vehicle could reverse from, the kerb line, the forecourt and the frontage construction. Ownership of the pavement in front of the shop is checked at the same time.
Excavate and set the posts
Each position is hand-dug near services and taken to depth, then the post is set plumb in a reinforced concrete base. Work is planned around trading hours where possible.
Reinstate the pavement
Paving, tarmac or forecourt concrete is made good flush with the base of each post, leaving no trip edges.
Options to consider
| Option | Detail |
|---|---|
| Stainless or decorative covers | Covers over steel cores for shopping streets and branded frontages where plain steel would look out of place. |
| Removable posts | Lockable removable positions allow deliveries, shopfitting or shutter maintenance without leaving the frontage open permanently. |
| PAS 170-1 tested bollards | Tested against low-speed vehicle impacts and suited to ram-raid risks where a tested product is requested. |
Pricing ram-raid bollards in Skelmersdale
Our North West guide prices are a starting point; the survey in Skelmersdale firms them up. What tends to move them:
- Removable positions and their locks
- Out-of-hours working to avoid closing the shop
- Unrated, PAS 170-1 or crash-rated product
Looking after them
Ram-raid bollards are robust but not maintenance-free. Keep visibility bands clean, repaint chips before rust sets in on steel, and keep locks on removable posts lubricated so staff can actually use them.
We can also service, repair or replace existing posts anywhere in Skelmersdale.
Ram-raid bollards in Skelmersdale: FAQs
Can you install ram-raid bollards anywhere in Skelmersdale?
We cover all of Skelmersdale (WN8) and the rest of Lancashire. We also work in Ormskirk, Wigan and Kirkby.
Who gives permission for bollards on the pavement in Skelmersdale?
The highway authority for local roads in Skelmersdale is Lancashire County Council; motorways and trunk roads sit with National Highways. Ram-raid bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
How much do ram-raid bollards cost in Skelmersdale?
In Skelmersdale, typically £385–£1,445 per bollard, supplied and installed, plus VAT, with a minimum job of £925 plus VAT, using our North West guide prices. The fixed figure comes in writing after we've seen the site.
What is PAS 170-1 and do I need it?
PAS 170-1 is a standard for testing vehicle security barriers against low-speed impacts. It suits ram-raid risks where someone has asked for tested performance, such as an insurer or security adviser. If nobody has asked for a tested product, a well-founded unrated post is often adequate.
Will bollards spoil the look of the shop?
They change the frontage, but stainless or powder-coated finishes in shopfront colours can make them look deliberate rather than defensive. Many shopping streets already have similar posts, so new ones can be matched to what is there.
Ram-raid bollards in nearby towns
- Ormskirk (4.6 mi)
- Wigan (5.6 mi)
- Kirkby (6.8 mi)
- Ashton-in-Makerfield (7 mi)
- St Helens (7.1 mi)
- Maghull (7.3 mi)