Perth and Kinross · Scotland
Ram-raid protection bollards in Blairgowrie
Local installation of ram-raid bollards in Blairgowrie — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageAbout ram-raid bollards in Blairgowrie
Ram-raid bollards suit plenty of Blairgowrie sites, town-centre squares, schools and filling-station forecourts among them. Bollards fitted in front of shopfronts, ATMs, jewellers and convenience stores to stop vehicles being used to break in.
Coverage in Blairgowrie takes in the PH10, PH13 and PH11 postcode districts and nearby places like Carsie, Kinloch, Bridge of Cally and Coupar Angus. Nearby, we also work in Perth (14 miles), Dundee (16.3 miles) and Forfar (17.5 miles), measured as the crow flies.
Blairgowrie at a glance
- Area
- Perth and Kinross, Scotland
- Roads authority
- Perth and Kinross Council (local roads)
- Planning authority
- Perth and Kinross Council
- Postcodes
- PH10, PH13 and PH11
- Guide price
- Typically £395–£1,495 per bollard + VAT; minimum job £945
- Survey
- Free, with a fixed written quote
Guide prices for Blairgowrie
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £395–£855 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £725–£1,195 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £1,045–£1,495 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Typical ram-raid bollards jobs in Blairgowrie
Typical reasons Blairgowrie sites choose ram-raid bollards:
- Jewellers, pawnbrokers and phone shops holding high-value stock
- Pharmacies and late-opening premises
- Convenience stores and off-licences with glazed frontages
Before we dig in Blairgowrie
For anything on the public footway in Blairgowrie we check with the roads authority first — Perth and Kinross Council for local roads, Transport Scotland on trunk routes. Private ground such as a car park or forecourt only needs the owner's go-ahead.
If your site in Blairgowrie is listed or inside a conservation area, check with the local planning authority (Perth and Kinross Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Deep foundations need care near the building's own footings and basement walls. Shop forecourts may be thin concrete over old fill, and filling station forecourts carry fuel lines, tank vents and interceptors that must be located precisely before anything is dug.
- If an insurer has asked for protection, confirm what standard or product they expect before ordering.
- Leave clear gaps for wheelchairs and buggies, typically at least 1,000 mm, and keep the footway width usable, referring to Inclusive Mobility guidance.
What happens on site
Agree the post type and positions
We agree unrated or tested posts with you, your landlord and any insurer or security adviser involved. A fixed written quote sets out the positions, foundations and reinstatement.
Arrange consents
If the posts will stand on public highway, the highway authority's agreement is needed before work starts. Landlord consent is usually needed for leased units.
Excavate and set the posts
Each position is hand-dug near services and taken to depth, then the post is set plumb in a reinforced concrete base. Work is planned around trading hours where possible.
Choosing the right spec
| Option | Detail |
|---|---|
| Crash-rated bollards | Tested to IWA 14-1, ISO 22343-1 or PAS 68 for high-value premises or where a vehicle could build up speed. |
| Reflective and contrasting bands | Bands near the top help pedestrians, including partially sighted people, see the posts on a busy pavement. |
| Concrete-filled steel posts | Thick-walled steel tube root-fixed in a deep reinforced base. The usual unrated choice for shopfronts and ATMs. |
Pricing ram-raid bollards in Blairgowrie
Two Blairgowrie jobs with the same number of posts can price quite differently. The usual reasons:
- Unrated, PAS 170-1 or crash-rated product
- Foundation depth and what is found under the pavement
- Reinstatement of forecourt or natural stone surfaces
After installation
Ram-raid bollards are robust but not maintenance-free. If you have been raided despite having bollards, look again at the positions and gaps, because offenders tend to aim at any weak point.
For damaged or loose posts in Blairgowrie, repairs and replacements are priced in writing first.
Common questions
Can you install ram-raid bollards anywhere in Blairgowrie?
We cover all of Blairgowrie (PH10, PH13 and PH11) and the rest of Perth and Kinross. We also work in Perth, Dundee and Forfar.
Do I need consent for ram-raid bollards on a public footway in Blairgowrie?
In Scotland the council is the roads authority for local roads, which in Blairgowrie means Perth and Kinross Council. Ram-raid bollards on an adopted footway need its consent; trunk roads sit with Transport Scotland.
What's a typical price for ram-raid bollards in Blairgowrie?
In Blairgowrie, typically £395–£1,495 per bollard, supplied and installed, plus VAT, with a minimum job of £945 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
Will bollards spoil the look of the shop?
They change the frontage, but stainless or powder-coated finishes in shopfront colours can make them look deliberate rather than defensive. Many shopping streets already have similar posts, so new ones can be matched to what is there.
What is PAS 170-1 and do I need it?
PAS 170-1 is a standard for testing vehicle security barriers against low-speed impacts. It suits ram-raid risks where someone has asked for tested performance, such as an insurer or security adviser. If nobody has asked for a tested product, a well-founded unrated post is often adequate.