Powys · Wales
Ram-raid protection bollards in Brecon
Ram-raid bollards supplied and fitted in Brecon, Powys: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageBrecon ram-raid bollards
Bollards fitted in front of shopfronts, ATMs, jewellers and convenience stores to stop vehicles being used to break in. In Brecon, that tends to mean sites such as schools, community car parks and small industrial units.
Coverage in Brecon takes in the LD3 postcode district and nearby places like Talgarth, Bronllys, Bwlch and Llanfrynach. Nearby, we also work in Tredegar (13.4 miles), Merthyr Tydfil (13.7 miles), Ebbw Vale (14 miles) and Aberdare (16.2 miles), measured as the crow flies. Swansea is around 33 miles away.
Key facts for this area
- Area
- Powys, Wales
- Highway authority
- Powys County Council (local roads)
- Planning authority
- Powys County Council
- Postcodes
- LD3
- Guide price
- Typically £385–£1,445 per bollard + VAT; minimum job £915
- Survey
- Free, with a fixed written quote
- Nearby
- Tredegar (13.4 mi), Merthyr Tydfil (13.7 mi), Ebbw Vale (14 mi), Aberdare (16.2 mi)
Where ram-raid bollards go in around Brecon
Common uses in a place like Brecon:
- Filling station kiosks and forecourt shops
- Jewellers, pawnbrokers and phone shops holding high-value stock
- Convenience stores and off-licences with glazed frontages
Brecon: typical ram-raid bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £385–£835 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £705–£1,145 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £1,045–£1,445 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; -3% for Wales. Guide only — the fixed price follows a survey.
Consents, ground and services in Brecon
Local roads and pavements in Brecon are the responsibility of Powys County Council as highway authority, with the Welsh Government's trunk road agents handling trunk roads. Posts on the public highway need that authority's consent; private land does not.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (Powys County Council) first — we flag this at survey.
We hand-dig near known services, adjust positions if a vault or duct is found, and reinstate the surface to match, whether that is slabs, block paving, asphalt or a sealed forecourt finish. Shopfronts often sit over cellars, coal holes, vaults and service entries, so what lies under the pavement can be more complicated than it looks.
- Leave clear gaps for wheelchairs and buggies, typically at least 1,000 mm, and keep the footway width usable, referring to Inclusive Mobility guidance.
- Ask your landlord, and check any lease restrictions on alterations to the frontage.
What happens on site
Agree the post type and positions
We agree unrated or tested posts with you, your landlord and any insurer or security adviser involved. A fixed written quote sets out the positions, foundations and reinstatement.
Arrange consents
If the posts will stand on public highway, the highway authority's agreement is needed before work starts. Landlord consent is usually needed for leased units.
Excavate and set the posts
Each position is hand-dug near services and taken to depth, then the post is set plumb in a reinforced concrete base. Work is planned around trading hours where possible.
Choosing the right spec
| Option | Detail |
|---|---|
| Crash-rated bollards | Tested to IWA 14-1, ISO 22343-1 or PAS 68 for high-value premises or where a vehicle could build up speed. |
| Reflective and contrasting bands | Bands near the top help pedestrians, including partially sighted people, see the posts on a busy pavement. |
| Concrete-filled steel posts | Thick-walled steel tube root-fixed in a deep reinforced base. The usual unrated choice for shopfronts and ATMs. |
What affects the quote
When we price ram-raid bollards in Brecon, these make the biggest difference:
- Removable positions and their locks
- Reinstatement of forecourt or natural stone surfaces
- Covers and finishes for shopping streets
Looking after them
If you have been raided despite having bollards, look again at the positions and gaps, because offenders tend to aim at any weak point. Keep visibility bands clean, repaint chips before rust sets in on steel, and keep locks on removable posts lubricated so staff can actually use them.
For damaged or loose posts in Brecon, repairs and replacements are priced in writing first.
Common questions
Do you install ram-raid bollards in Brecon?
We cover all of Brecon (LD3) and the rest of Powys. We also work in Tredegar, Merthyr Tydfil and Ebbw Vale.
Who gives permission for bollards on the pavement in Brecon?
Local roads and pavements in Brecon are the responsibility of Powys County Council as highway authority, with the Welsh Government's trunk road agents handling trunk roads. Posts on the public highway need that authority's consent; private land does not.
What's a typical price for ram-raid bollards in Brecon?
In Brecon, typically £385–£1,445 per bollard, supplied and installed, plus VAT, with a minimum job of £915 plus VAT, using our Wales guide prices. The fixed figure comes in writing after we've seen the site.
Can bollards go on the pavement outside my shop?
Only if you own the ground or have the highway authority's agreement. Many shop frontages include a strip of private forecourt, which is simpler. We check ownership as part of the survey.
What is PAS 170-1 and do I need it?
PAS 170-1 is a standard for testing vehicle security barriers against low-speed impacts. It suits ram-raid risks where someone has asked for tested performance, such as an insurer or security adviser. If nobody has asked for a tested product, a well-founded unrated post is often adequate.
Ram-raid bollards in nearby towns
- Tredegar (13.4 mi)
- Merthyr Tydfil (13.7 mi)
- Ebbw Vale (14 mi)
- Aberdare (16.2 mi)
- Abergavenny (18 mi)
- Mountain Ash (18.1 mi)