Shropshire · England
Ram-raid protection bollards in Wellington
Local installation of ram-raid bollards in Wellington — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageRam-raid bollards in Wellington
Bollards fitted in front of shopfronts, ATMs, jewellers and convenience stores to stop vehicles being used to break in. In Wellington, that tends to mean sites such as small industrial units, schools and community car parks.
Coverage in Wellington takes in the TF6 postcode district and nearby places like High Ercall, Allscott, Crudgington and Little Wenlock. Nearby, we also work in Telford (3.3 miles), Shrewsbury (9.9 miles), Stafford (18.3 miles) and Wolverhampton (18.3 miles), measured as the crow flies. Wellington is about 18 miles from Wolverhampton.
Local details
- Area
- Shropshire, England
- Highway authority
- Telford and Wrekin Council (local roads)
- Planning authority
- Telford and Wrekin Council
- Postcodes
- TF6
- Guide price
- Typically £395–£1,495 per bollard + VAT; minimum job £945
- Survey
- Free, with a fixed written quote
- Nearby
- Telford (3.3 mi), Shrewsbury (9.9 mi), Stafford (18.3 mi), Wolverhampton (18.3 mi)
What ram-raid bollards cost in Wellington
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £395–£855 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £725–£1,195 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £1,045–£1,495 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
What Wellington sites use ram-raid bollards for
Around Wellington, ram-raid bollards usually solve one of these:
- Through-the-wall and freestanding ATMs
- Convenience stores and off-licences with glazed frontages
- Premises that have already been targeted once
Permissions and groundwork in Wellington
The highway authority for local roads in Wellington is Telford and Wrekin Council; motorways and trunk roads sit with National Highways. Ram-raid bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
If your site in Wellington is listed or inside a conservation area, check with the local planning authority (Telford and Wrekin Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Shopfronts often sit over cellars, coal holes, vaults and service entries, so what lies under the pavement can be more complicated than it looks. We hand-dig near known services, adjust positions if a vault or duct is found, and reinstate the surface to match, whether that is slabs, block paving, asphalt or a sealed forecourt finish.
- Leave clear gaps for wheelchairs and buggies, typically at least 1,000 mm, and keep the footway width usable, referring to Inclusive Mobility guidance.
- Check who owns the ground in front of the shop; if it is public highway, the highway authority's agreement is needed.
Installation, step by step
Agree the post type and positions
We agree unrated or tested posts with you, your landlord and any insurer or security adviser involved. A fixed written quote sets out the positions, foundations and reinstatement.
Arrange consents
If the posts will stand on public highway, the highway authority's agreement is needed before work starts. Landlord consent is usually needed for leased units.
Reinstate the pavement
Paving, tarmac or forecourt concrete is made good flush with the base of each post, leaving no trip edges.
Choosing the right spec
| Option | Detail |
|---|---|
| Concrete-filled steel posts | Thick-walled steel tube root-fixed in a deep reinforced base. The usual unrated choice for shopfronts and ATMs. |
| PAS 170-1 tested bollards | Tested against low-speed vehicle impacts and suited to ram-raid risks where a tested product is requested. |
| Reflective and contrasting bands | Bands near the top help pedestrians, including partially sighted people, see the posts on a busy pavement. |
Pricing ram-raid bollards in Wellington
Our West Midlands guide prices are a starting point; the survey in Wellington firms them up. What tends to move them:
- Number of posts across the frontage or ATM
- Unrated, PAS 170-1 or crash-rated product
- Out-of-hours working to avoid closing the shop
Keeping them working
Keep visibility bands clean, repaint chips before rust sets in on steel, and keep locks on removable posts lubricated so staff can actually use them. Ram-raid bollards are robust but not maintenance-free.
For damaged or loose posts in Wellington, repairs and replacements are priced in writing first.
Common questions
Which parts of Wellington do you cover for ram-raid bollards?
We cover all of Wellington (TF6) and the rest of Shropshire. We also work in Telford, Shrewsbury and Stafford.
Who gives permission for bollards on the pavement in Wellington?
The highway authority for local roads in Wellington is Telford and Wrekin Council; motorways and trunk roads sit with National Highways. Ram-raid bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
How much do ram-raid bollards cost in Wellington?
In Wellington, typically £395–£1,495 per bollard, supplied and installed, plus VAT, with a minimum job of £945 plus VAT, using our West Midlands guide prices. The fixed figure comes in writing after we've seen the site.
Can we still take deliveries through the front?
Yes, if one or more positions are removable. Staff unlock and lift out the post for deliveries, then refit it. The socket is designed to sit flush when the post is out.
Can bollards go on the pavement outside my shop?
Only if you own the ground or have the highway authority's agreement. Many shop frontages include a strip of private forecourt, which is simpler. We check ownership as part of the survey.
Ram-raid bollards in nearby towns
- Telford (3.3 mi)
- Shrewsbury (9.9 mi)
- Stafford (18.3 mi)
- Wolverhampton (18.3 mi)
- Wednesfield (19.5 mi)
- Kingswinford (20.2 mi)