Angus · Scotland
Removable bollard installation in Arbroath
Planning removable bollards in Arbroath? We check ownership, consents and buried services first, then quote a fixed price.
Computer-generated imageAbout removable bollards in Arbroath
Removable bollards suit plenty of Arbroath sites, filling-station forecourts, high street shopfronts and community buildings among them. Removable bollards are used where vehicles need occasional rather than daily access.
We cover Arbroath's DD11 postcode district, including places such as Friockheim, Inverkeilor, St Vigeans and Auchmithie. We also cover neighbouring Carnoustie (6.1 miles), Montrose (11.6 miles), Forfar (12.8 miles) and Dundee (16.1 miles) — distances are straight-line.
Arbroath at a glance
- Area
- Angus, Scotland
- Roads authority
- Angus Council (local roads)
- Planning authority
- Angus Council
- Postcodes
- DD11
- Guide price
- Typically £245–£845 per bollard + VAT (£285–£995 inc VAT for homes); minimum job £595
- Survey
- Free, with a fixed written quote
- Nearby
- Carnoustie (6.1 mi), Montrose (11.6 mi), Forfar (12.8 mi), Dundee (16.1 mi)
Removable bollard prices in Arbroath
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £245–£495 + VAT · £285–£585 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £425–£675 + VAT · £505–£805 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £605–£845 + VAT · £725–£995 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with ground socket, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
What Arbroath sites use removable bollards for
Typical reasons Arbroath sites choose removable bollards:
- Temporary event closures and market streets
- Gaps in a fixed bollard line that must open occasionally
- Delivery bays in pedestrian areas and shop frontages
Permissions and groundwork in Arbroath
In Scotland the council is the roads authority for local roads, which in Arbroath means Angus Council. Removable bollards on an adopted footway need its consent; trunk roads sit with Transport Scotland.
If your site in Arbroath is listed or inside a conservation area, check with the local planning authority (Angus Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
On block paving, the socket is set before the blocks are cut to it, so the pattern finishes cleanly. On thin tarmac drives, the surround is sized so the socket does not loosen over time.
- On emergency access routes, agree with the fire service how they will remove the posts, such as standard keys or bolt croppers on padlocks.
- Keep a clear route of typically at least 1,000–1,200 mm between posts on pedestrian routes, and check against Inclusive Mobility guidance.
What happens on site
Cut and excavate
A small square of surface is cut out and excavated to socket depth, with a bed of free-draining stone at the bottom so water can leave the socket.
Set the socket flush
The socket is set in concrete with its rim exactly at finished surface level and to the fall of the ground, so the lid sits flat and nothing catches on it.
Reinstate around the socket
Block paving, tarmac or flags are cut tight to the collar and made good. On resin or bound surfaces, the edge is sealed neatly.
Specification choices
| Option | Detail |
|---|---|
| Rated removable posts | Crash-tested removable models exist for security lines; they use heavier sockets and tested foundations. |
| Socket lids | Spring-closing, hinged or lockable lids that sit flush when the post is removed, so there is no open hole. |
| Diameter and height | Commonly 76–140 mm diameter and around 900–1,000 mm high, chosen to suit visibility and handling. |
What affects the quote
Our Scotland guide prices are a starting point; the survey in Arbroath firms them up. What tends to move them:
- Number of posts and sockets
- Post material: steel, stainless or aluminium
- Lock type and whether locks are keyed alike
Looking after them
Removable bollards fail in predictable ways: seized locks, sockets full of grit and lids that no longer close. Check the lid springs and hinges.
For damaged or loose posts in Arbroath, repairs and replacements are priced in writing first.
Questions about removable bollards in Arbroath
Do you install removable bollards in Arbroath?
We cover all of Arbroath (DD11) and the rest of Angus. We also work in Carnoustie, Montrose and Forfar.
Do I need consent for removable bollards on a public footway in Arbroath?
For anything on the public footway in Arbroath we check with the roads authority first — Angus Council for local roads, Transport Scotland on trunk routes. Private ground such as a car park or forecourt only needs the owner's go-ahead.
How much do removable bollards cost in Arbroath?
In Arbroath, typically £245–£845 per bollard with ground socket, supplied and installed, plus VAT (£285–£995 including VAT for homeowners), with a minimum job of £595 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
Can removable bollards be installed on block paving?
Yes. The socket is set in concrete beneath the blocks and the blocks are cut tight around the collar. It finishes neatly if the socket is set to the exact paving level.
Where do we keep the post when it is removed?
Somewhere it cannot become a trip hazard or be taken. A wall-mounted storage bracket or a locked store nearby works well. Leaving posts lying on the ground is how they get damaged or lost.