Devon · England
Removable bollard installation in Bideford
Removable bollards for sites across Bideford and the rest of Devon, from the first measurement to the last relaid paving block.
Computer-generated imageBideford removable bollards
In the town of Bideford, removable bollards tend to go in at local parades, community car parks and schools. When the post is out, the socket is closed with a hinged lid or cap so the surface is flush.
Coverage in Bideford takes in the EX39 and EX38 postcode districts and nearby places like Northam, Westward Ho!, Hartland and Buckland Brewer. Nearby, we also work in Barnstaple (7.9 miles), measured as the crow flies.
Key facts for this area
- Area
- Devon, England
- Highway authority
- Devon County Council (local roads)
- Planning authority
- the council for Torridge
- Postcodes
- EX39 and EX38
- Guide price
- Typically £245–£845 per bollard + VAT (£285–£995 inc VAT for homes); minimum job £595
- Survey
- Free, with a fixed written quote
- Nearby
- Barnstaple (7.9 mi)
Typical removable bollards jobs in Bideford
Typical reasons Bideford sites choose removable bollards:
- Temporary event closures and market streets
- School gates closed during drop-off and pick-up
- Delivery bays in pedestrian areas and shop frontages
Bideford: typical removable bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £245–£495 + VAT · £285–£585 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £425–£675 + VAT · £505–£805 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £605–£845 + VAT · £725–£995 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with ground socket, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Consents, ground and services in Bideford
The highway authority for local roads in Bideford is Devon County Council; motorways and trunk roads sit with National Highways. Removable bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (the council for Torridge) first — we flag this at survey.
A socket set even a few millimetres proud becomes a trip edge and gets clipped by tyres and snow ploughs; one set low collects water and grit. On block paving, the socket is set before the blocks are cut to it, so the pattern finishes cleanly.
- Fit reflective or contrasting bands near the top so posts are visible when in place.
- On emergency access routes, agree with the fire service how they will remove the posts, such as standard keys or bolt croppers on padlocks.
From survey to handover
Cut and excavate
A small square of surface is cut out and excavated to socket depth, with a bed of free-draining stone at the bottom so water can leave the socket.
Reinstate around the socket
Block paving, tarmac or flags are cut tight to the collar and made good. On resin or bound surfaces, the edge is sealed neatly.
Fit posts and hand over keys
Posts are fitted and locked, and the lift-out and refit routine is checked on site. Keys and any storage brackets are handed over.
Choosing the right spec
| Option | Detail |
|---|---|
| Steel, stainless or aluminium posts | Galvanised and powder-coated steel for robustness, stainless for appearance, aluminium where lightness matters for frequent lifting. |
| Heads and handles | Dome, flat or ball heads, with lifting handles or eyes so posts can be pulled out without strain. |
| Diameter and height | Commonly 76–140 mm diameter and around 900–1,000 mm high, chosen to suit visibility and handling. |
Pricing removable bollards in Bideford
When we price removable bollards in Bideford, these make the biggest difference:
- Number of posts and sockets
- Post material: steel, stainless or aluminium
- Drainage at the socket base
After installation
Check the lid springs and hinges. Lubricate locks a few times a year with a graphite or lock-specific spray, lift the posts out periodically even if they are not needed, and clear the socket of debris.
If posts in Bideford are later hit or damaged, we can repair or replace them — see bollard repairs.
Questions about removable bollards in Bideford
Can you install removable bollards anywhere in Bideford?
We cover all of Bideford (EX39 and EX38) and the rest of Devon. We also work in Barnstaple.
Who gives permission for bollards on the pavement in Bideford?
Devon County Council is the highway authority covering Bideford's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
How much do removable bollards cost in Bideford?
In Bideford, typically £245–£845 per bollard with ground socket, supplied and installed, plus VAT (£285–£995 including VAT for homeowners), with a minimum job of £595 plus VAT, using our South West guide prices. The fixed figure comes in writing after we've seen the site.
Will a removable bollard freeze in place?
It can if water sits in the socket and freezes around the post. Good drainage at the socket base is the main defence. A little lubricant on the post and lifting it out occasionally in winter also helps.
What happens to the hole when the bollard is out?
A lid on the socket closes over it so the surface is flush. Spring-closing lids shut automatically when the post is lifted. That stops trips and keeps debris out.