Essex · England
Removable bollard installation in Harwich
Removable bollards supplied and fitted in Harwich, Essex: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageRemovable bollards in Harwich
Across Harwich, typical sites for removable bollards include schools, high street shopfronts and community car parks. When the post is out, the socket is closed with a hinged lid or cap so the surface is flush.
We work across CO12 — Harwich itself and places including Great Oakley, Parkeston, Little Oakley and Stones Green. We also cover neighbouring Felixstowe (3.2 miles), Ipswich (9.8 miles), Clacton-on-Sea (11.9 miles) and Colchester (16.6 miles) — distances are straight-line. Harwich is about 37 miles from Southend-on-Sea.
Local details
- Area
- Essex, England
- Highway authority
- Essex County Council (local roads)
- Planning authority
- the council for Tendring
- Postcodes
- CO12
- Guide price
- Typically £255–£875 per bollard + VAT (£305–£1,045 inc VAT for homes); minimum job £605
- Survey
- Free, with a fixed written quote
- Nearby
- Felixstowe (3.2 mi), Ipswich (9.8 mi), Clacton-on-Sea (11.9 mi), Colchester (16.6 mi)
Where removable bollards go in around Harwich
Common uses in a place like Harwich:
- Delivery bays in pedestrian areas and shop frontages
- School gates closed during drop-off and pick-up
- Driveways and private parking bays
Removable bollard prices in Harwich
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £255–£515 + VAT · £305–£615 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £435–£695 + VAT · £515–£825 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £625–£875 + VAT · £745–£1,045 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with ground socket, supplied and installed; +3% for East of England. Guide only — the fixed price follows a survey.
Consents, ground and services in Harwich
Essex County Council is the highway authority covering Harwich's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
Many private-land installations in Harwich need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at the council for Tendring before posts go in.
On thin tarmac drives, the surround is sized so the socket does not loosen over time. The critical details are level and drainage.
- On emergency access routes, agree with the fire service how they will remove the posts, such as standard keys or bolt croppers on padlocks.
- Check whether the location is public highway; a highway authority agreement is usually needed there.
From survey to handover
Agree who will lift the post
At the free site survey we talk through who will remove the post, how often and where it will be stored. That decides material, diameter and lock, and goes into a fixed written quote.
Reinstate around the socket
Block paving, tarmac or flags are cut tight to the collar and made good. On resin or bound surfaces, the edge is sealed neatly.
Fit posts and hand over keys
Posts are fitted and locked, and the lift-out and refit routine is checked on site. Keys and any storage brackets are handed over.
Finishes and options
| Option | Detail |
|---|---|
| Steel, stainless or aluminium posts | Galvanised and powder-coated steel for robustness, stainless for appearance, aluminium where lightness matters for frequent lifting. |
| Locking type | Triangular or square key, padlock, or integral keyed cylinder. Keyed-alike locks let one key open every post on a site. |
| Rated removable posts | Crash-tested removable models exist for security lines; they use heavier sockets and tested foundations. |
What affects the quote
When we price removable bollards in Harwich, these make the biggest difference:
- Surface type and reinstatement
- Drainage at the socket base
- Post material: steel, stainless or aluminium
Looking after them
Check the lid springs and hinges. Lubricate locks a few times a year with a graphite or lock-specific spray, lift the posts out periodically even if they are not needed, and clear the socket of debris.
We can also service, repair or replace existing posts anywhere in Harwich.
Removable bollards in Harwich: FAQs
Which parts of Harwich do you cover for removable bollards?
We cover all of Harwich (CO12) and the rest of Essex. We also work in Felixstowe, Ipswich and Clacton-on-Sea.
Who gives permission for bollards on the pavement in Harwich?
Essex County Council is the highway authority covering Harwich's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
What's a typical price for removable bollards in Harwich?
In Harwich, typically £255–£875 per bollard with ground socket, supplied and installed, plus VAT (£305–£1,045 including VAT for homeowners), with a minimum job of £605 plus VAT, using our East of England guide prices. The fixed figure comes in writing after we've seen the site.
Where do we keep the post when it is removed?
Somewhere it cannot become a trip hazard or be taken. A wall-mounted storage bracket or a locked store nearby works well. Leaving posts lying on the ground is how they get damaged or lost.
Can all the bollards on our site use one key?
Yes, if the locks are ordered keyed alike. That is common on estates and car parks with several access points. Spare keys can be supplied at the same time.