Wiltshire · England
Removable bollard installation in Swindon
Removable bollards supplied and fitted in Swindon, Wiltshire: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageRemovable bollards in Swindon
In the town of Swindon, removable bollards tend to go in at leisure centres, industrial estates and supermarket frontages. When the post is out, the socket is closed with a hinged lid or cap so the surface is flush.
Coverage in Swindon takes in the SN1, SN2, SN3, SN5, SN25 and SN4 postcode districts and nearby places like Stratton St Margaret, South Marston, Wanborough and Blunsdon St Andrew. We also cover neighbouring Cirencester (13.8 miles), Chippenham (16.3 miles) and Witney (20.1 miles) — distances are straight-line. Reading is around 36 miles away.
Key facts for this area
- Area
- Wiltshire, England
- Highway authority
- Swindon Council (local roads)
- Planning authority
- Swindon Council
- Postcodes
- SN1, SN2, SN3, SN5, SN25, SN4, SN26 and SN6
- Guide price
- Typically £245–£845 per bollard + VAT (£285–£995 inc VAT for homes); minimum job £595
- Survey
- Free, with a fixed written quote
- Nearby
- Cirencester (13.8 mi), Chippenham (16.3 mi), Witney (20.1 mi)
Removable bollards in Swindon: common uses
Common uses in a place like Swindon:
- School gates closed during drop-off and pick-up
- Gaps in a fixed bollard line that must open occasionally
- Emergency and fire service access routes
What removable bollards cost in Swindon
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £245–£495 + VAT · £285–£585 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £425–£675 + VAT · £505–£805 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £605–£845 + VAT · £725–£995 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with ground socket, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Permissions and groundwork in Swindon
The highway authority for local roads in Swindon is Swindon Council; motorways and trunk roads sit with National Highways. Removable bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (Swindon Council) first — we flag this at survey.
On thin tarmac drives, the surround is sized so the socket does not loosen over time. The critical details are level and drainage.
- Keep a clear route of typically at least 1,000–1,200 mm between posts on pedestrian routes, and check against Inclusive Mobility guidance.
- Fit reflective or contrasting bands near the top so posts are visible when in place.
From survey to handover
Agree who will lift the post
At the free site survey we talk through who will remove the post, how often and where it will be stored. That decides material, diameter and lock, and goes into a fixed written quote.
Reinstate around the socket
Block paving, tarmac or flags are cut tight to the collar and made good. On resin or bound surfaces, the edge is sealed neatly.
Fit posts and hand over keys
Posts are fitted and locked, and the lift-out and refit routine is checked on site. Keys and any storage brackets are handed over.
Options to consider
| Option | Detail |
|---|---|
| Rated removable posts | Crash-tested removable models exist for security lines; they use heavier sockets and tested foundations. |
| Heads and handles | Dome, flat or ball heads, with lifting handles or eyes so posts can be pulled out without strain. |
| Locking type | Triangular or square key, padlock, or integral keyed cylinder. Keyed-alike locks let one key open every post on a site. |
Pricing removable bollards in Swindon
Our South West guide prices are a starting point; the survey in Swindon firms them up. What tends to move them:
- Drainage at the socket base
- Post material: steel, stainless or aluminium
- Surface type and reinstatement
Looking after them
Keep spare keys somewhere sensible, because lost keys are a common reason for a post being cut out. Removable bollards fail in predictable ways: seized locks, sockets full of grit and lids that no longer close.
For damaged or loose posts in Swindon, repairs and replacements are priced in writing first.
Questions about removable bollards in Swindon
Which parts of Swindon do you cover for removable bollards?
We cover all of Swindon (SN1, SN2, SN3, SN5, SN25 and SN4) and the rest of Wiltshire. We also work in Cirencester, Chippenham and Witney.
Do I need consent for removable bollards on a public footway in Swindon?
The highway authority for local roads in Swindon is Swindon Council; motorways and trunk roads sit with National Highways. Removable bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
How much do removable bollards cost in Swindon?
In Swindon, typically £245–£845 per bollard with ground socket, supplied and installed, plus VAT (£285–£995 including VAT for homeowners), with a minimum job of £595 plus VAT, using our South West guide prices. The fixed figure comes in writing after we've seen the site.
How heavy is a removable bollard to lift?
It depends on material and size; a slim aluminium post is easy to lift, while a large concrete-filled steel post is not designed for daily handling. If the post will come out every day, say so at the survey and we will suggest something lighter with a handle.
What happens to the hole when the bollard is out?
A lid on the socket closes over it so the surface is flush. Spring-closing lids shut automatically when the post is lifted. That stops trips and keeps debris out.