Scotland · 6 towns
Semi-automatic bollard installation in Aberdeenshire
Semi-automatic bollards for sites across Aberdeenshire: surveyed, quoted in writing and installed by our crews.
Computer-generated imageSemi-automatic bollards in Aberdeenshire
Gas-strut assisted bollards that rise on their own when unlocked and lower by hand, with no mains power needed. We cover Aberdeenshire — Peterhead, Inverurie, Fraserburgh, Westhill and Stonehaven and more.
Highway and roads authorities for local roads in Aberdeenshire: Aberdeenshire Council.
Choose your town in Aberdeenshire
Guide prices in Aberdeenshire
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £1,095–£2,095 + VAT · £1,295–£2,495 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £1,795–£2,845 + VAT · £2,145–£3,395 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £2,545–£3,495 + VAT · £3,045–£4,195 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Highway and planning authorities in Aberdeenshire
| Town | Highway / roads authority | Planning authority |
|---|---|---|
| Peterhead | Aberdeenshire Council | Aberdeenshire Council |
| Inverurie | Aberdeenshire Council | Aberdeenshire Council |
| Fraserburgh | Aberdeenshire Council | Aberdeenshire Council |
| Westhill | Aberdeenshire Council | Aberdeenshire Council |
| Stonehaven | Aberdeenshire Council | Aberdeenshire Council |
| Ellon | Aberdeenshire Council | Aberdeenshire Council |
Rules for semi-automatic bollards in Scotland
Works in a public road or footway need the roads authority's written consent under the Roads (Scotland) Act 1984. On private land the owner's agreement is what matters; listed buildings and conservation areas need a word with the planning team first. Accessibility guidance asks for posts at least 1,000 mm high with contrasting tops and no chains between them.
Details and sources: bollard rules in Scotland.
How installation works
Survey use and ground
At the free site survey we look at how often the post will be used, who will operate it and what is under the surface. A fixed written quote follows, including drainage.
Excavate the pit
The surface is cut and the pit dug to the cassette depth plus a drainage layer, by hand near services.
Reinstate the surface
Paving or surfacing is made good tight to the cassette collar so there is no lip for tyres or feet to catch.
Test and show users
The post is cycled several times to check it rises fully, locks at both heights and lowers smoothly. Users are shown how to operate it and to keep clear of the head when it rises.
Semi-automatic bollards in Aberdeenshire: FAQs
Do you cover all of Aberdeenshire for semi-automatic bollards?
Yes — including Peterhead, Inverurie, Fraserburgh, Westhill, Stonehaven and Ellon. Enter your postcode in the price calculator to confirm.
How much do semi-automatic bollards cost in Aberdeenshire?
In Aberdeenshire, typically £1,095–£3,495 per bollard, supplied and installed, plus VAT (£1,295–£4,195 including VAT for homeowners), with a minimum job of £1,195 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
Who do I ask about bollards on public land in Aberdeenshire?
The council is the roads authority for local roads (Aberdeenshire Council); Transport Scotland covers trunk roads. Works in a public road need the roads authority's written consent.
Why has my semi-automatic bollard stopped rising fully?
Usually because the gas strut has lost pressure, or debris and water in the cassette are slowing it. Check and clean the cassette first. If it still stops short, the strut needs replacing.
Is it hard to push the bollard back down?
Not usually; most users press it down with a hand or foot. The strut resists, so it needs a steady push rather than a sharp kick. Heavier commercial models take more effort than domestic ones.