England · 1 towns
Semi-automatic bollard installation in Bristol
Semi-automatic bollards for sites across Bristol: surveyed, quoted in writing and installed by our crews.
Computer-generated imageSemi-automatic bollards in Bristol
We supply and install semi-automatic bollards across Bristol, with local pages for 1 town below. Gas-strut assisted bollards that rise on their own when unlocked and lower by hand, with no mains power needed.
Highway authorities for local roads in Bristol: Bristol City Council.
Choose your town in Bristol
Guide prices in Bristol
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £1,095–£2,095 + VAT · £1,295–£2,495 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £1,795–£2,845 + VAT · £2,145–£3,395 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £2,545–£3,495 + VAT · £3,045–£4,195 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Highway and planning authorities in Bristol
| Town | Highway / roads authority | Planning authority |
|---|---|---|
| Bristol | Bristol City Council | Bristol City Council |
Rules for semi-automatic bollards in England
Bollards on adopted highway are a matter for the highway authority under the Highways Act 1980, so they need its written agreement. On private land the owner's agreement is what matters; listed buildings and conservation areas need a word with the planning team first. Accessibility guidance asks for posts at least 1,000 mm high with contrasting tops and no chains between them.
Details and sources: bollard rules in England.
How installation works
Survey use and ground
At the free site survey we look at how often the post will be used, who will operate it and what is under the surface. A fixed written quote follows, including drainage.
Excavate the pit
The surface is cut and the pit dug to the cassette depth plus a drainage layer, by hand near services.
Set the cassette
The cassette is set plumb and flush with the finished surface, connected to drainage and concreted in. The strut is fitted or released only as the manufacturer instructs.
Test and show users
The post is cycled several times to check it rises fully, locks at both heights and lowers smoothly. Users are shown how to operate it and to keep clear of the head when it rises.
Semi-automatic bollards in Bristol: FAQs
Do you cover all of Bristol for semi-automatic bollards?
Yes — including Bristol. Enter your postcode in the price calculator to confirm.
How much do semi-automatic bollards cost in Bristol?
In Bristol, typically £1,095–£3,495 per bollard, supplied and installed, plus VAT (£1,295–£4,195 including VAT for homeowners), with a minimum job of £1,195 plus VAT, using our South West guide prices. The fixed figure comes in writing after we've seen the site.
Who do I ask about bollards on public land in Bristol?
For local roads, Bristol City Council; National Highways covers motorways and trunk roads. Bollards on adopted highway need the highway authority's written agreement.
Why has my semi-automatic bollard stopped rising fully?
Usually because the gas strut has lost pressure, or debris and water in the cassette are slowing it. Check and clean the cassette first. If it still stops short, the strut needs replacing.
Is it hard to push the bollard back down?
Not usually; most users press it down with a hand or foot. The strut resists, so it needs a steady push rather than a sharp kick. Heavier commercial models take more effort than domestic ones.