Scotland · 5 towns
Semi-automatic bollard installation in North Ayrshire
Semi-automatic bollards for sites across North Ayrshire: surveyed, quoted in writing and installed by our crews.
Computer-generated imageSemi-automatic bollards in North Ayrshire
Across North Ayrshire, typical sites for semi-automatic bollards include schools, community car parks and local parades. Gas-strut assisted bollards that rise on their own when unlocked and lower by hand, with no mains power needed.
Highway and roads authorities for local roads in North Ayrshire: North Ayrshire Council.
Choose your town in North Ayrshire
Guide prices in North Ayrshire
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £1,095–£2,095 + VAT · £1,295–£2,495 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £1,795–£2,845 + VAT · £2,145–£3,395 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £2,545–£3,495 + VAT · £3,045–£4,195 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Who looks after the roads in North Ayrshire
| Town | Highway / roads authority | Planning authority |
|---|---|---|
| Irvine | North Ayrshire Council | North Ayrshire Council |
| Kilwinning | North Ayrshire Council | North Ayrshire Council |
| Saltcoats | North Ayrshire Council | North Ayrshire Council |
| Largs | North Ayrshire Council | North Ayrshire Council |
| Ardrossan | North Ayrshire Council | North Ayrshire Council |
Rules for semi-automatic bollards in Scotland
Works in a public road or footway need the roads authority's written consent under the Roads (Scotland) Act 1984. On private land the owner's agreement is what matters; listed buildings and conservation areas need a word with the planning team first. Accessibility guidance asks for posts at least 1,000 mm high with contrasting tops and no chains between them.
Details and sources: bollard rules in Scotland.
How installation works
Excavate the pit
The surface is cut and the pit dug to the cassette depth plus a drainage layer, by hand near services.
Set the cassette
The cassette is set plumb and flush with the finished surface, connected to drainage and concreted in. The strut is fitted or released only as the manufacturer instructs.
Reinstate the surface
Paving or surfacing is made good tight to the cassette collar so there is no lip for tyres or feet to catch.
Test and show users
The post is cycled several times to check it rises fully, locks at both heights and lowers smoothly. Users are shown how to operate it and to keep clear of the head when it rises.
Semi-automatic bollards in North Ayrshire: FAQs
Do you cover all of North Ayrshire for semi-automatic bollards?
The mainland, yes — Arran and Great Cumbrae are outside our coverage. including Irvine, Kilwinning, Saltcoats, Largs and Ardrossan. Enter your postcode in the price calculator to confirm.
How much do semi-automatic bollards cost in North Ayrshire?
In North Ayrshire, typically £1,095–£3,495 per bollard, supplied and installed, plus VAT (£1,295–£4,195 including VAT for homeowners), with a minimum job of £1,195 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
Who do I ask about bollards on public land in North Ayrshire?
The council is the roads authority for local roads (North Ayrshire Council); Transport Scotland covers trunk roads. Works in a public road need the roads authority's written consent.
What makes a semi-automatic bollard rise without power?
A gas strut or spring inside the cassette. Pushing the post down compresses it and a latch holds the post below ground. Turning the key releases the latch and the stored energy lifts the post.
Is it hard to push the bollard back down?
Not usually; most users press it down with a hand or foot. The strut resists, so it needs a steady push rather than a sharp kick. Heavier commercial models take more effort than domestic ones.