Scotland · 4 towns
Semi-automatic bollard installation in Renfrewshire
Semi-automatic bollards for sites across Renfrewshire: surveyed, quoted in writing and installed by our crews.
Computer-generated imageSemi-automatic bollards in Renfrewshire
Gas-strut assisted bollards that rise on their own when unlocked and lower by hand, with no mains power needed. We cover Renfrewshire — Paisley, Renfrew, Johnstone and Erskine.
Highway and roads authorities for local roads in Renfrewshire: Renfrewshire Council.
Choose your town in Renfrewshire
Guide prices in Renfrewshire
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £1,095–£2,095 + VAT · £1,295–£2,495 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £1,795–£2,845 + VAT · £2,145–£3,395 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £2,545–£3,495 + VAT · £3,045–£4,195 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Highway and planning authorities in Renfrewshire
| Town | Highway / roads authority | Planning authority |
|---|---|---|
| Paisley | Renfrewshire Council | Renfrewshire Council |
| Renfrew | Renfrewshire Council | Renfrewshire Council |
| Johnstone | Renfrewshire Council | Renfrewshire Council |
| Erskine | Renfrewshire Council | Renfrewshire Council |
Rules for semi-automatic bollards in Scotland
Works in a public road or footway need the roads authority's written consent under the Roads (Scotland) Act 1984. On private land the owner's agreement is what matters; listed buildings and conservation areas need a word with the planning team first. Accessibility guidance asks for posts at least 1,000 mm high with contrasting tops and no chains between them.
Details and sources: bollard rules in Scotland.
How installation works
Survey use and ground
At the free site survey we look at how often the post will be used, who will operate it and what is under the surface. A fixed written quote follows, including drainage.
Set the cassette
The cassette is set plumb and flush with the finished surface, connected to drainage and concreted in. The strut is fitted or released only as the manufacturer instructs.
Reinstate the surface
Paving or surfacing is made good tight to the cassette collar so there is no lip for tyres or feet to catch.
Test and show users
The post is cycled several times to check it rises fully, locks at both heights and lowers smoothly. Users are shown how to operate it and to keep clear of the head when it rises.
Semi-automatic bollards in Renfrewshire: FAQs
Do you cover all of Renfrewshire for semi-automatic bollards?
Yes — including Paisley, Renfrew, Johnstone and Erskine. Enter your postcode in the price calculator to confirm.
How much do semi-automatic bollards cost in Renfrewshire?
In Renfrewshire, typically £1,095–£3,495 per bollard, supplied and installed, plus VAT (£1,295–£4,195 including VAT for homeowners), with a minimum job of £1,195 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
Who do I ask about bollards on public land in Renfrewshire?
The council is the roads authority for local roads (Renfrewshire Council); Transport Scotland covers trunk roads. Works in a public road need the roads authority's written consent.
Is it hard to push the bollard back down?
Not usually; most users press it down with a hand or foot. The strut resists, so it needs a steady push rather than a sharp kick. Heavier commercial models take more effort than domestic ones.
Can a semi-automatic bollard injure someone as it rises?
It rises with some force, so nobody should stand over it or put a hand on the head when releasing it. Users should be shown how to operate it safely. On busy sites, a sign and reflective bands help.