England · 3 towns
Semi-automatic bollard installation in Shropshire
Semi-automatic bollards for sites across Shropshire: surveyed, quoted in writing and installed by our crews.
Computer-generated imageSemi-automatic bollards in Shropshire
We supply and install semi-automatic bollards across Shropshire, with local pages for 3 towns below. Gas-strut assisted bollards that rise on their own when unlocked and lower by hand, with no mains power needed.
Highway authorities for local roads in Shropshire: Shropshire Council and Telford and Wrekin Council.
Choose your town in Shropshire
Guide prices in Shropshire
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £1,095–£2,095 + VAT · £1,295–£2,495 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £1,795–£2,845 + VAT · £2,145–£3,395 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £2,545–£3,495 + VAT · £3,045–£4,195 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Who looks after the roads in Shropshire
| Town | Highway / roads authority | Planning authority |
|---|---|---|
| Telford | Telford and Wrekin Council | Telford and Wrekin Council |
| Shrewsbury | Shropshire Council | Shropshire Council |
| Wellington | Telford and Wrekin Council | Telford and Wrekin Council |
Rules for semi-automatic bollards in England
Bollards on adopted highway are a matter for the highway authority under the Highways Act 1980, so they need its written agreement. On private land the owner's agreement is what matters; listed buildings and conservation areas need a word with the planning team first. Accessibility guidance asks for posts at least 1,000 mm high with contrasting tops and no chains between them.
Details and sources: bollard rules in England.
How installation works
Survey use and ground
At the free site survey we look at how often the post will be used, who will operate it and what is under the surface. A fixed written quote follows, including drainage.
Excavate the pit
The surface is cut and the pit dug to the cassette depth plus a drainage layer, by hand near services.
Set the cassette
The cassette is set plumb and flush with the finished surface, connected to drainage and concreted in. The strut is fitted or released only as the manufacturer instructs.
Reinstate the surface
Paving or surfacing is made good tight to the cassette collar so there is no lip for tyres or feet to catch.
Semi-automatic bollards in Shropshire: FAQs
Do you cover all of Shropshire for semi-automatic bollards?
Yes — including Telford, Shrewsbury and Wellington. Enter your postcode in the price calculator to confirm.
How much do semi-automatic bollards cost in Shropshire?
In Shropshire, typically £1,095–£3,495 per bollard, supplied and installed, plus VAT (£1,295–£4,195 including VAT for homeowners), with a minimum job of £1,195 plus VAT, using our West Midlands guide prices. The fixed figure comes in writing after we've seen the site.
Who do I ask about bollards on public land in Shropshire?
For local roads, Shropshire Council and Telford and Wrekin Council; National Highways covers motorways and trunk roads. Bollards on adopted highway need the highway authority's written agreement.
Do semi-automatic bollards suit domestic driveways?
Yes, if the owner wants less lifting than a telescopic post. The same depth and drainage checks apply. Domestic models are lighter duty than commercial ones.
What makes a semi-automatic bollard rise without power?
A gas strut or spring inside the cassette. Pushing the post down compresses it and a latch holds the post below ground. Turning the key releases the latch and the stored energy lifts the post.