Scotland · 2 towns
Shallow-mount security bollard installation in East Ayrshire
Shallow-mount bollards for sites across East Ayrshire: surveyed, quoted in writing and installed by our crews.
Computer-generated imageShallow-mount bollards in East Ayrshire
Across East Ayrshire, typical sites for shallow-mount bollards include schools, community car parks and high street shopfronts. Rated shallow-foundation bollard systems installed where buried services, basements or slabs rule out deep excavation.
Highway and roads authorities for local roads in East Ayrshire: East Ayrshire Council.
Choose your town in East Ayrshire
Guide prices in East Ayrshire
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £1,995–£4,945 + VAT | Rated for a 7.5 t vehicle at 30 mph (48 km/h), tested foundation |
| Upgraded | £4,095–£7,045 + VAT | Rated for 7.5 t at 40 mph (64 km/h), tested foundation |
| Premium | £6,195–£8,995 + VAT | Rated for 7.5 t at 50 mph (80 km/h), or a specialist foundation |
Per bollard position, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Highway and planning authorities in East Ayrshire
| Town | Highway / roads authority | Planning authority |
|---|---|---|
| Kilmarnock | East Ayrshire Council | East Ayrshire Council |
| Cumnock | East Ayrshire Council | East Ayrshire Council |
Rules for shallow-mount bollards in Scotland
Works in a public road or footway need the roads authority's written consent under the Roads (Scotland) Act 1984. On private land the owner's agreement is what matters; listed buildings and conservation areas need a word with the planning team first. Crash ratings (ISO 22343-1, or the superseded but still accepted PAS 68 and IWA 14-1) only hold when the product is installed to its tested foundation.
Details and sources: bollard rules in Scotland.
How installation works
Cut and excavate the trench
Paving is lifted and kept for reuse where possible, and a shallow trench is excavated by hand near known services. Where a service sits higher than expected, work stops and the detail is referred back.
Assemble and level the frame
Frame sections are placed, joined and set to line and level, with posts fixed as the drawing shows. Joints and fixings are photographed before any concrete goes in.
Pour, cure and reinstate
Concrete is placed to the specified grade and finish depth, then the surface is rebuilt to match. The line is protected until the specified curing period has passed.
Record and hand over
As-built drawings show the frame position relative to services, which matters for anyone digging nearby later. Product certificates and photographs go to the client's adviser.
Shallow-mount bollards in East Ayrshire: FAQs
Do you cover all of East Ayrshire for shallow-mount bollards?
Yes — including Kilmarnock and Cumnock. Enter your postcode in the price calculator to confirm.
How much do shallow-mount bollards cost in East Ayrshire?
In East Ayrshire, typically £1,995–£8,995 per bollard position, supplied and installed, plus VAT, with a minimum job of £4,995 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
Who do I ask about bollards on public land in East Ayrshire?
The council is the roads authority for local roads (East Ayrshire Council); Transport Scotland covers trunk roads. Works in a public road need the roads authority's written consent.
Can shallow-mount bollards go on a car park deck?
Sometimes, if a structural engineer confirms the deck can take the impact loads and the waterproofing can be protected. Decks were not designed with vehicle attacks in mind, so this check comes before anything else. Some manufacturers offer details specifically for structures.
Does a shallow system protect as well as a deep one?
It can achieve the same rating, because both are tested to the same standards. What differs is how the load is resisted. Your security adviser should compare the specific ratings, not the foundation depths.