Hertfordshire · England
Shallow-mount security bollard installation in Hertford
Local installation of shallow-mount bollards in Hertford — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageAbout shallow-mount bollards in Hertford
Across Hertford, typical sites for shallow-mount bollards include community car parks, schools and filling-station forecourts. Rated shallow-foundation bollard systems installed where buried services, basements or slabs rule out deep excavation.
We work across SG13, SG14 and SG12 — Hertford itself and places including Little Berkhamsted, Bayford, Brickendon and Watton at Stone. Jobs in Hertford can be combined with work in Hoddesdon (3.7 miles), Welwyn Garden City (5.5 miles), Hatfield (6.6 miles) and Cheshunt (6.9 miles) (straight-line distances). It sits roughly 16 miles from Luton as the crow flies.
Hertford at a glance
- Area
- Hertfordshire, England
- Highway authority
- Hertfordshire County Council (local roads)
- Planning authority
- the council for East Hertfordshire
- Postcodes
- SG13, SG14 and SG12
- Guide price
- Typically £2,045–£9,245 per bollard + VAT; minimum job £5,145
- Survey
- Free, with a fixed written quote
- Nearby
- Hoddesdon (3.7 mi), Welwyn Garden City (5.5 mi), Hatfield (6.6 mi), Cheshunt (6.9 mi)
Typical shallow-mount bollards jobs in Hertford
Common uses in a place like Hertford:
- Bridges and structures where excavation depth is limited
- Footways with dense utility runs just below the surface
- Podium decks, car park roofs and basement slabs
Shallow-mount bollard prices in Hertford
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £2,045–£5,095 + VAT | Rated for a 7.5 t vehicle at 30 mph (48 km/h), tested foundation |
| Upgraded | £4,195–£7,245 + VAT | Rated for 7.5 t at 40 mph (64 km/h), tested foundation |
| Premium | £6,395–£9,245 + VAT | Rated for 7.5 t at 50 mph (80 km/h), or a specialist foundation |
Per bollard position, supplied and installed; +3% for East of England. Guide only — the fixed price follows a survey.
Consents, ground and services in Hertford
The highway authority for local roads in Hertford is Hertfordshire County Council; motorways and trunk roads sit with National Highways. Shallow-mount bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (the council for East Hertfordshire) first — we flag this at survey.
The trench has to sit over services with enough cover to protect them, but the frame also needs a firm, consistent bearing; soft spots, old backfill around pipe trenches and voids under paving can all need treating first. On decks and roofs, the waterproofing and drainage layers must be protected or rebuilt, and fixings must not puncture membranes unless the structural and waterproofing designers have agreed a detail.
- Keep the test certificate for the exact system and configuration, including the minimum run length and end details.
- Get written confirmation from a structural engineer before installing on slabs, decks, basements or over voids.
From survey to handover
Cut and excavate the trench
Paving is lifted and kept for reuse where possible, and a shallow trench is excavated by hand near known services. Where a service sits higher than expected, work stops and the detail is referred back.
Assemble and level the frame
Frame sections are placed, joined and set to line and level, with posts fixed as the drawing shows. Joints and fixings are photographed before any concrete goes in.
Pour, cure and reinstate
Concrete is placed to the specified grade and finish depth, then the surface is rebuilt to match. The line is protected until the specified curing period has passed.
Finishes and options
| Option | Detail |
|---|---|
| Rated planters and street furniture | Benches, planters and cycle stands built around a tested shallow core, used where a line of posts would look out of place. |
| Surface-mounted rated units | Some tested products sit on or very close to the surface with minimal digging. These are often used for temporary or semi-permanent protection and need careful checking of the surface they bear on. |
| Modular cassette sections | Pre-made sections joined on site, allowing short runs and changes of direction within the manufacturer's tested limits. |
Pricing shallow-mount bollards in Hertford
When we price shallow-mount bollards in Hertford, these make the biggest difference:
- Structural engineering checks on slabs or decks
- Lifting, storing and relaying natural stone paving
- Changes of direction, end details and removable positions
After installation
If one post is struck, the frame may have transmitted load to its neighbours, so the whole run near the impact should be checked with the manufacturer rather than replacing a single post in isolation. Any later utility work beside the line should be supervised so the frame is not undermined.
If posts in Hertford are later hit or damaged, we can repair or replace them — see bollard repairs.
Shallow-mount bollards in Hertford: FAQs
Which parts of Hertford do you cover for shallow-mount bollards?
We cover all of Hertford (SG13, SG14 and SG12) and the rest of Hertfordshire. We also work in Hoddesdon, Welwyn Garden City and Hatfield.
Who gives permission for bollards on the pavement in Hertford?
In Hertford, work on adopted pavements and verges needs consent from Hertfordshire County Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
What's a typical price for shallow-mount bollards in Hertford?
In Hertford, typically £2,045–£9,245 per bollard position, supplied and installed, plus VAT, with a minimum job of £5,145 plus VAT, using our East of England guide prices. The fixed figure comes in writing after we've seen the site.
How much shallower is a shallow-mount bollard foundation?
Often a fraction of the depth of a conventional rated foundation, commonly a few hundred millimetres. The exact depth depends on the system and rating chosen. What you gain in depth is usually traded for width, because the load is spread along a linked frame.
Will future roadworks damage the system?
They can if contractors dig beside it without knowing it is there. That is why we provide as-built drawings showing the frame position. Ask anyone excavating nearby to check those drawings first.
Shallow-mount bollards in nearby towns
- Hoddesdon (3.7 mi)
- Welwyn Garden City (5.5 mi)
- Hatfield (6.6 mi)
- Cheshunt (6.9 mi)
- Harlow (8.2 mi)
- Waltham Abbey (8.2 mi)