Midlothian · Scotland
Shallow-mount security bollard installation in Bonnyrigg
Shallow-mount bollards supplied and fitted in Bonnyrigg, Midlothian: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageAbout shallow-mount bollards in Bonnyrigg
Whether it's filling-station forecourts, small industrial units and high street shopfronts, shallow-mount bollards in Bonnyrigg are planned around who needs to get through and who doesn't. Like any rated product, its performance applies only to the configuration and foundation that were tested.
We work across EH19, EH18, EH24, EH20, EH25 and EH23 — Bonnyrigg itself and places including Rosewell, Loanhead, Old Pentland and Roslin. Nearby, we also work in Dalkeith (2 miles), Musselburgh (5.2 miles), Penicuik (5.5 miles) and Edinburgh (6.5 miles), measured as the crow flies. It sits roughly 6 miles from Edinburgh as the crow flies.
Bonnyrigg at a glance
- Area
- Midlothian, Scotland
- Roads authority
- Midlothian Council (local roads)
- Planning authority
- Midlothian Council
- Postcodes
- EH19, EH18, EH24, EH20, EH25 and EH23
- Guide price
- Typically £1,995–£8,995 per bollard + VAT; minimum job £4,995
- Survey
- Free, with a fixed written quote
- Nearby
- Dalkeith (2 mi), Musselburgh (5.2 mi), Penicuik (5.5 mi), Edinburgh (6.5 mi)
Shallow-mount bollards in Bonnyrigg: common uses
Around Bonnyrigg, shallow-mount bollards usually solve one of these:
- Listed or historic streets where deep digging is unwelcome
- Footways with dense utility runs just below the surface
- Podium decks, car park roofs and basement slabs
Shallow-mount bollard prices in Bonnyrigg
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £1,995–£4,945 + VAT | Rated for a 7.5 t vehicle at 30 mph (48 km/h), tested foundation |
| Upgraded | £4,095–£7,045 + VAT | Rated for 7.5 t at 40 mph (64 km/h), tested foundation |
| Premium | £6,195–£8,995 + VAT | Rated for 7.5 t at 50 mph (80 km/h), or a specialist foundation |
Per bollard position, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Before we dig in Bonnyrigg
In Scotland the council is the roads authority for local roads, which in Bonnyrigg means Midlothian Council. Shallow-mount bollards on an adopted footway need its consent; trunk roads sit with Transport Scotland.
Bollards on private land often need no planning application, but listed buildings and conservation areas are different; the planning service at Midlothian Council can confirm before anything is ordered.
Shallow does not mean simple. On decks and roofs, the waterproofing and drainage layers must be protected or rebuilt, and fixings must not puncture membranes unless the structural and waterproofing designers have agreed a detail.
- Keep the test certificate for the exact system and configuration, including the minimum run length and end details.
- Agree works and separation distances with utility owners, and with the roads authority where the line is on public highway.
What happens on site
Confirm the system with the manufacturer
The survey findings go back to the manufacturer and the client's adviser to confirm the system, its layout and any end details. A fixed written quote follows the free site survey.
Cut and excavate the trench
Paving is lifted and kept for reuse where possible, and a shallow trench is excavated by hand near known services. Where a service sits higher than expected, work stops and the detail is referred back.
Record and hand over
As-built drawings show the frame position relative to services, which matters for anyone digging nearby later. Product certificates and photographs go to the client's adviser.
Choosing the right spec
| Option | Detail |
|---|---|
| Linked-frame systems | Posts are welded or bolted to a continuous steel frame laid in a shallow trench and encased in concrete. Suited to straight or gently curved lines. |
| Rated planters and street furniture | Benches, planters and cycle stands built around a tested shallow core, used where a line of posts would look out of place. |
| Modular cassette sections | Pre-made sections joined on site, allowing short runs and changes of direction within the manufacturer's tested limits. |
Pricing shallow-mount bollards in Bonnyrigg
When we price shallow-mount bollards in Bonnyrigg, these make the biggest difference:
- Lifting, storing and relaying natural stone paving
- Amount of hand digging needed around live services
- Structural engineering checks on slabs or decks
Keeping them working
Pay attention to the surface around the posts, because settlement or loose paving can indicate movement in the bearing layer. If one post is struck, the frame may have transmitted load to its neighbours, so the whole run near the impact should be checked with the manufacturer rather than replacing a single post in isolation.
If posts in Bonnyrigg are later hit or damaged, we can repair or replace them — see bollard repairs.
Common questions
Do you install shallow-mount bollards in Bonnyrigg?
We cover all of Bonnyrigg (EH19, EH18, EH24, EH20, EH25 and EH23) and the rest of Midlothian. We also work in Dalkeith, Musselburgh and Penicuik.
Do I need consent for shallow-mount bollards on a public footway in Bonnyrigg?
In Scotland the council is the roads authority for local roads, which in Bonnyrigg means Midlothian Council. Shallow-mount bollards on an adopted footway need its consent; trunk roads sit with Transport Scotland.
What's a typical price for shallow-mount bollards in Bonnyrigg?
In Bonnyrigg, typically £1,995–£8,995 per bollard position, supplied and installed, plus VAT, with a minimum job of £4,995 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
Can I install a single shallow-mount bollard on its own?
Usually not. Most shallow systems rely on several posts working together, and the rating applies to a tested run with a stated minimum number of posts. A single position generally needs a different solution.
Can shallow-mount bollards go on a car park deck?
Sometimes, if a structural engineer confirms the deck can take the impact loads and the waterproofing can be protected. Decks were not designed with vehicle attacks in mind, so this check comes before anything else. Some manufacturers offer details specifically for structures.
Shallow-mount bollards near Bonnyrigg
- Dalkeith (2 mi)
- Musselburgh (5.2 mi)
- Penicuik (5.5 mi)
- Edinburgh (6.5 mi)
- Tranent (7.6 mi)
- South Queensferry (14 mi)