Scotland · 6 towns
Shallow-mount security bollard installation in North Lanarkshire
Shallow-mount bollards for sites across North Lanarkshire: surveyed, quoted in writing and installed by our crews.
Computer-generated imageShallow-mount bollards in North Lanarkshire
Rated shallow-foundation bollard systems installed where buried services, basements or slabs rule out deep excavation. We cover North Lanarkshire — Cumbernauld, Coatbridge, Airdrie, Motherwell and Wishaw and more.
Highway and roads authorities for local roads in North Lanarkshire: North Lanarkshire Council.
Choose your town in North Lanarkshire
Guide prices in North Lanarkshire
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £1,995–£4,945 + VAT | Rated for a 7.5 t vehicle at 30 mph (48 km/h), tested foundation |
| Upgraded | £4,095–£7,045 + VAT | Rated for 7.5 t at 40 mph (64 km/h), tested foundation |
| Premium | £6,195–£8,995 + VAT | Rated for 7.5 t at 50 mph (80 km/h), or a specialist foundation |
Per bollard position, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Who looks after the roads in North Lanarkshire
| Town | Highway / roads authority | Planning authority |
|---|---|---|
| Cumbernauld | North Lanarkshire Council | North Lanarkshire Council |
| Coatbridge | North Lanarkshire Council | North Lanarkshire Council |
| Airdrie | North Lanarkshire Council | North Lanarkshire Council |
| Motherwell | North Lanarkshire Council | North Lanarkshire Council |
| Wishaw | North Lanarkshire Council | North Lanarkshire Council |
| Bellshill | North Lanarkshire Council | North Lanarkshire Council |
Rules for shallow-mount bollards in Scotland
Works in a public road or footway need the roads authority's written consent under the Roads (Scotland) Act 1984. On private land the owner's agreement is what matters; listed buildings and conservation areas need a word with the planning team first. Crash ratings (ISO 22343-1, or the superseded but still accepted PAS 68 and IWA 14-1) only hold when the product is installed to its tested foundation.
Details and sources: bollard rules in Scotland.
How installation works
Map what is underground
Utility records, radar scanning and trial holes establish exactly how much depth is available along the line. This is the survey that decides whether a shallow system will fit at all.
Cut and excavate the trench
Paving is lifted and kept for reuse where possible, and a shallow trench is excavated by hand near known services. Where a service sits higher than expected, work stops and the detail is referred back.
Assemble and level the frame
Frame sections are placed, joined and set to line and level, with posts fixed as the drawing shows. Joints and fixings are photographed before any concrete goes in.
Record and hand over
As-built drawings show the frame position relative to services, which matters for anyone digging nearby later. Product certificates and photographs go to the client's adviser.
Shallow-mount bollards in North Lanarkshire: FAQs
Do you cover all of North Lanarkshire for shallow-mount bollards?
Yes — including Cumbernauld, Coatbridge, Airdrie, Motherwell, Wishaw and Bellshill. Enter your postcode in the price calculator to confirm.
How much do shallow-mount bollards cost in North Lanarkshire?
In North Lanarkshire, typically £1,995–£8,995 per bollard position, supplied and installed, plus VAT, with a minimum job of £4,995 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
Who do I ask about bollards on public land in North Lanarkshire?
The council is the roads authority for local roads (North Lanarkshire Council); Transport Scotland covers trunk roads. Works in a public road need the roads authority's written consent.
Does a shallow system protect as well as a deep one?
It can achieve the same rating, because both are tested to the same standards. What differs is how the load is resisted. Your security adviser should compare the specific ratings, not the foundation depths.
Can I install a single shallow-mount bollard on its own?
Usually not. Most shallow systems rely on several posts working together, and the rating applies to a tested run with a stated minimum number of posts. A single position generally needs a different solution.