England · 3 towns
Shallow-mount security bollard installation in Northumberland
Shallow-mount bollards for sites across Northumberland: surveyed, quoted in writing and installed by our crews.
Computer-generated imageShallow-mount bollards in Northumberland
We supply and install shallow-mount bollards across Northumberland, with local pages for 3 towns below. Rated shallow-foundation bollard systems installed where buried services, basements or slabs rule out deep excavation.
Highway authorities for local roads in Northumberland: Northumberland County Council.
Choose your town in Northumberland
Guide prices in Northumberland
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £1,895–£4,745 + VAT | Rated for a 7.5 t vehicle at 30 mph (48 km/h), tested foundation |
| Upgraded | £3,945–£6,745 + VAT | Rated for 7.5 t at 40 mph (64 km/h), tested foundation |
| Premium | £5,945–£8,645 + VAT | Rated for 7.5 t at 50 mph (80 km/h), or a specialist foundation |
Per bollard position, supplied and installed; -4% for North East. Guide only — the fixed price follows a survey.
Local authorities across Northumberland
| Town | Highway / roads authority | Planning authority |
|---|---|---|
| Blyth | Northumberland County Council | Northumberland County Council |
| Cramlington | Northumberland County Council | Northumberland County Council |
| Ashington | Northumberland County Council | Northumberland County Council |
Rules for shallow-mount bollards in England
Bollards on adopted highway are a matter for the highway authority under the Highways Act 1980, so they need its written agreement. On private land the owner's agreement is what matters; listed buildings and conservation areas need a word with the planning team first. Crash ratings (ISO 22343-1, or the superseded but still accepted PAS 68 and IWA 14-1) only hold when the product is installed to its tested foundation.
Details and sources: bollard rules in England.
How installation works
Map what is underground
Utility records, radar scanning and trial holes establish exactly how much depth is available along the line. This is the survey that decides whether a shallow system will fit at all.
Cut and excavate the trench
Paving is lifted and kept for reuse where possible, and a shallow trench is excavated by hand near known services. Where a service sits higher than expected, work stops and the detail is referred back.
Assemble and level the frame
Frame sections are placed, joined and set to line and level, with posts fixed as the drawing shows. Joints and fixings are photographed before any concrete goes in.
Record and hand over
As-built drawings show the frame position relative to services, which matters for anyone digging nearby later. Product certificates and photographs go to the client's adviser.
Shallow-mount bollards in Northumberland: FAQs
Do you cover all of Northumberland for shallow-mount bollards?
Yes — including Blyth, Cramlington and Ashington. Enter your postcode in the price calculator to confirm.
How much do shallow-mount bollards cost in Northumberland?
In Northumberland, typically £1,895–£8,645 per bollard position, supplied and installed, plus VAT, with a minimum job of £4,795 plus VAT, using our North East guide prices. The fixed figure comes in writing after we've seen the site.
Who do I ask about bollards on public land in Northumberland?
For local roads, Northumberland County Council; National Highways covers motorways and trunk roads. Bollards on adopted highway need the highway authority's written agreement.
Will future roadworks damage the system?
They can if contractors dig beside it without knowing it is there. That is why we provide as-built drawings showing the frame position. Ask anyone excavating nearby to check those drawings first.
Can I install a single shallow-mount bollard on its own?
Usually not. Most shallow systems rely on several posts working together, and the rating applies to a tested run with a stated minimum number of posts. A single position generally needs a different solution.