England · 3 towns
Shallow-mount security bollard installation in Shropshire
Shallow-mount bollards for sites across Shropshire: surveyed, quoted in writing and installed by our crews.
Computer-generated imageShallow-mount bollards in Shropshire
We supply and install shallow-mount bollards across Shropshire, with local pages for 3 towns below. Rated shallow-foundation bollard systems installed where buried services, basements or slabs rule out deep excavation.
Highway authorities for local roads in Shropshire: Shropshire Council and Telford and Wrekin Council.
Choose your town in Shropshire
Guide prices in Shropshire
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £1,995–£4,945 + VAT | Rated for a 7.5 t vehicle at 30 mph (48 km/h), tested foundation |
| Upgraded | £4,095–£7,045 + VAT | Rated for 7.5 t at 40 mph (64 km/h), tested foundation |
| Premium | £6,195–£8,995 + VAT | Rated for 7.5 t at 50 mph (80 km/h), or a specialist foundation |
Per bollard position, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Local authorities across Shropshire
| Town | Highway / roads authority | Planning authority |
|---|---|---|
| Telford | Telford and Wrekin Council | Telford and Wrekin Council |
| Shrewsbury | Shropshire Council | Shropshire Council |
| Wellington | Telford and Wrekin Council | Telford and Wrekin Council |
Rules for shallow-mount bollards in England
Bollards on adopted highway are a matter for the highway authority under the Highways Act 1980, so they need its written agreement. On private land the owner's agreement is what matters; listed buildings and conservation areas need a word with the planning team first. Crash ratings (ISO 22343-1, or the superseded but still accepted PAS 68 and IWA 14-1) only hold when the product is installed to its tested foundation.
Details and sources: bollard rules in England.
How installation works
Map what is underground
Utility records, radar scanning and trial holes establish exactly how much depth is available along the line. This is the survey that decides whether a shallow system will fit at all.
Cut and excavate the trench
Paving is lifted and kept for reuse where possible, and a shallow trench is excavated by hand near known services. Where a service sits higher than expected, work stops and the detail is referred back.
Assemble and level the frame
Frame sections are placed, joined and set to line and level, with posts fixed as the drawing shows. Joints and fixings are photographed before any concrete goes in.
Pour, cure and reinstate
Concrete is placed to the specified grade and finish depth, then the surface is rebuilt to match. The line is protected until the specified curing period has passed.
Shallow-mount bollards in Shropshire: FAQs
Do you cover all of Shropshire for shallow-mount bollards?
Yes — including Telford, Shrewsbury and Wellington. Enter your postcode in the price calculator to confirm.
How much do shallow-mount bollards cost in Shropshire?
In Shropshire, typically £1,995–£8,995 per bollard position, supplied and installed, plus VAT, with a minimum job of £4,995 plus VAT, using our West Midlands guide prices. The fixed figure comes in writing after we've seen the site.
Who do I ask about bollards on public land in Shropshire?
For local roads, Shropshire Council and Telford and Wrekin Council; National Highways covers motorways and trunk roads. Bollards on adopted highway need the highway authority's written agreement.
Can I install a single shallow-mount bollard on its own?
Usually not. Most shallow systems rely on several posts working together, and the rating applies to a tested run with a stated minimum number of posts. A single position generally needs a different solution.
How much shallower is a shallow-mount bollard foundation?
Often a fraction of the depth of a conventional rated foundation, commonly a few hundred millimetres. The exact depth depends on the system and rating chosen. What you gain in depth is usually traded for width, because the load is spread along a linked frame.