England · 6 towns
Shallow-mount security bollard installation in South Yorkshire
Shallow-mount bollards for sites across South Yorkshire: surveyed, quoted in writing and installed by our crews.
Computer-generated imageShallow-mount bollards in South Yorkshire
Across South Yorkshire, typical sites for shallow-mount bollards include stadium approaches, university campuses and pedestrianised streets. Rated shallow-foundation bollard systems installed where buried services, basements or slabs rule out deep excavation.
Highway authorities for local roads in South Yorkshire: Barnsley Council, Doncaster Council, Rotherham Council and Sheffield City Council.
Choose your town in South Yorkshire
Guide prices in South Yorkshire
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £1,945–£4,795 + VAT | Rated for a 7.5 t vehicle at 30 mph (48 km/h), tested foundation |
| Upgraded | £3,995–£6,845 + VAT | Rated for 7.5 t at 40 mph (64 km/h), tested foundation |
| Premium | £5,995–£8,745 + VAT | Rated for 7.5 t at 50 mph (80 km/h), or a specialist foundation |
Per bollard position, supplied and installed; -3% for Yorkshire and the Humber. Guide only — the fixed price follows a survey.
Local authorities across South Yorkshire
| Town | Highway / roads authority | Planning authority |
|---|---|---|
| Sheffield | Sheffield City Council | Sheffield City Council |
| Rotherham | Rotherham Council | Rotherham Council |
| Doncaster | Doncaster Council | Doncaster Council |
| Barnsley | Barnsley Council | Barnsley Council |
| Chapeltown | Sheffield City Council | Sheffield City Council |
| Darton | Barnsley Council | Barnsley Council |
Rules for shallow-mount bollards in England
Bollards on adopted highway are a matter for the highway authority under the Highways Act 1980, so they need its written agreement. On private land the owner's agreement is what matters; listed buildings and conservation areas need a word with the planning team first. Crash ratings (ISO 22343-1, or the superseded but still accepted PAS 68 and IWA 14-1) only hold when the product is installed to its tested foundation.
Details and sources: bollard rules in England.
How installation works
Map what is underground
Utility records, radar scanning and trial holes establish exactly how much depth is available along the line. This is the survey that decides whether a shallow system will fit at all.
Cut and excavate the trench
Paving is lifted and kept for reuse where possible, and a shallow trench is excavated by hand near known services. Where a service sits higher than expected, work stops and the detail is referred back.
Assemble and level the frame
Frame sections are placed, joined and set to line and level, with posts fixed as the drawing shows. Joints and fixings are photographed before any concrete goes in.
Pour, cure and reinstate
Concrete is placed to the specified grade and finish depth, then the surface is rebuilt to match. The line is protected until the specified curing period has passed.
Shallow-mount bollards in South Yorkshire: FAQs
Do you cover all of South Yorkshire for shallow-mount bollards?
Yes — including Sheffield, Rotherham, Doncaster, Barnsley, Chapeltown and Darton. Enter your postcode in the price calculator to confirm.
How much do shallow-mount bollards cost in South Yorkshire?
In South Yorkshire, typically £1,945–£8,745 per bollard position, supplied and installed, plus VAT, with a minimum job of £4,845 plus VAT, using our Yorkshire and the Humber guide prices. The fixed figure comes in writing after we've seen the site.
Who do I ask about bollards on public land in South Yorkshire?
For local roads, Barnsley Council, Doncaster Council, Rotherham Council and Sheffield City Council; National Highways covers motorways and trunk roads. Bollards on adopted highway need the highway authority's written agreement.
Will future roadworks damage the system?
They can if contractors dig beside it without knowing it is there. That is why we provide as-built drawings showing the frame position. Ask anyone excavating nearby to check those drawings first.
Can I install a single shallow-mount bollard on its own?
Usually not. Most shallow systems rely on several posts working together, and the rating applies to a tested run with a stated minimum number of posts. A single position generally needs a different solution.