City of Edinburgh · Scotland
Steel security bollard installation in Edinburgh
Steel security bollards for sites across Edinburgh and the rest of City of Edinburgh, from the first measurement to the last relaid paving block.
Computer-generated imageSteel security bollards in Edinburgh
We supply and fit steel security bollards throughout Edinburgh, typically for sites such as university campuses, pedestrianised streets and city-centre plazas. Unrated steel bollards have not been crash-tested, so they deter vehicles and stop low-speed knocks and casual misuse rather than a determined attack.
Coverage in Edinburgh takes in the EH1, EH2, EH3, EH8, EH7 and EH9 postcode districts. We also cover neighbouring Musselburgh (5.7 miles), Dalkeith (6.4 miles), Bonnyrigg (6.5 miles) and South Queensferry (8.3 miles) — distances are straight-line.
Local details
- Area
- City of Edinburgh, Scotland
- Roads authority
- City of Edinburgh Council (local roads)
- Planning authority
- City of Edinburgh Council
- Postcodes
- EH1, EH2, EH3, EH8, EH7, EH9, EH6 and EH5
- Guide price
- Typically £195–£895 per bollard + VAT (£225–£1,045 inc VAT for homes); minimum job £595
- Survey
- Free, with a fixed written quote
- Nearby
- Musselburgh (5.7 mi), Dalkeith (6.4 mi), Bonnyrigg (6.5 mi), South Queensferry (8.3 mi)
Steel security bollard prices in Edinburgh
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £195–£485 + VAT · £225–£575 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £405–£695 + VAT · £485–£825 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £615–£895 + VAT · £735–£1,045 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Where steel security bollards go in around Edinburgh
Typical reasons Edinburgh sites choose steel security bollards:
- Forecourts and building entrances needing a visible boundary
- Car park perimeters, end-of-bay protection and walkway edges
- Lines between pedestrian routes and service yards
Before we dig in Edinburgh
In Scotland the council is the roads authority for local roads, which in Edinburgh means City of Edinburgh Council. Steel security bollards on an adopted footway need its consent; trunk roads sit with Transport Scotland.
Bollards on private land often need no planning application, but listed buildings and conservation areas are different; the planning service at City of Edinburgh Council can confirm before anything is ordered.
Reinstatement matches the surface, whether tarmac, block paving, flags or turf. Service runs commonly follow kerb lines and verges, which is exactly where steel posts tend to go, so positions are checked with records and scanning before digging.
- Check whether the land is public highway or adopted verge before installing; the roads authority's agreement is usually needed.
- Avoid linking posts with chains across pedestrian routes, which can be a trip hazard for blind and partially sighted people.
Installation, step by step
Survey and set out
A free site survey confirms positions, surfaces, buried services and whether root-fixing or base plates suit the ground. You receive a fixed written quote listing post size, finish and fixing.
Set the posts
Posts are set plumb and to a consistent height along the line, and concreted in. Base-plated posts are drilled, anchored with resin and torqued once cured.
Reinstate and finish
The surface around each post is made good to match, and reflective bands are fitted. Damaged galvanising from handling is touched up.
Specification choices
| Option | Detail |
|---|---|
| Caps and heads | Dome, flat, chamfered or ball tops, with welded caps to keep water out of hollow posts. |
| Finishes | Hot-dip galvanised, then powder-coated in a RAL colour if wanted. Black, grey, yellow and green are common. |
| Visibility bands | Reflective or contrasting bands near the top for drivers at night and for partially sighted pedestrians. |
What moves the price in Edinburgh
When we price steel security bollards in Edinburgh, these make the biggest difference:
- Surface reinstatement such as block paving or tarmac
- Root-fixed or base-plated installation
- Ground conditions and buried services
Looking after them
Reflective bands fade and peel and are easy to renew. Check periodically for impact damage, loose base plates and cracked surfacing around the root.
If posts in Edinburgh are later hit or damaged, we can repair or replace them — see bollard repairs.
Common questions
Do you install steel security bollards in Edinburgh?
We cover all of Edinburgh (EH1, EH2, EH3, EH8, EH7 and EH9) and the rest of City of Edinburgh. We also work in Musselburgh, Dalkeith and Bonnyrigg.
Who gives permission for bollards on the pavement in Edinburgh?
In Scotland the council is the roads authority for local roads, which in Edinburgh means City of Edinburgh Council. Steel security bollards on an adopted footway need its consent; trunk roads sit with Transport Scotland.
How much do steel security bollards cost in Edinburgh?
In Edinburgh, typically £195–£895 per bollard, supplied and installed, plus VAT (£225–£1,045 including VAT for homeowners), with a minimum job of £595 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
Will galvanised posts rust?
Hot-dip galvanising protects steel for a long time in normal outdoor conditions. Powder coat over the galvanising adds colour and extra protection. Touch up chips promptly in coastal or heavily salted locations.
Why fill a steel bollard with concrete?
Concrete infill adds weight and stiffness, so the post dents less and is harder to cut. It also stops water collecting inside a hollow tube. It is usual for security and impact positions.
Steel security bollards in nearby towns
- Musselburgh (5.7 mi)
- Dalkeith (6.4 mi)
- Bonnyrigg (6.5 mi)
- South Queensferry (8.3 mi)
- Penicuik (8.4 mi)
- Tranent (9.4 mi)