Hampshire · England
Steel security bollard installation in Yateley
Steel security bollards for sites across Yateley and the rest of Hampshire, from the first measurement to the last relaid paving block.
Computer-generated imageSteel security bollards in Yateley
Steel security bollards suit plenty of Yateley sites, filling-station forecourts, small industrial units and high street shopfronts among them. Concrete-filled steel bollards, root-fixed or base-plated, for car parks, forecourts, boundaries and nuisance vehicle control.
Coverage in Yateley takes in the GU46 and GU17 postcode districts and nearby places like Minley. We also cover neighbouring Sandhurst (1.9 miles), Crowthorne (2.5 miles), Camberley (3.8 miles) and Fleet (4.1 miles) — distances are straight-line. Reading is around 10 miles away.
Yateley at a glance
- Area
- Hampshire, England
- Highway authority
- Hampshire County Council (local roads)
- Planning authority
- the council for Hart
- Postcodes
- GU46 and GU17
- Guide price
- Typically £205–£945 per bollard + VAT (£245–£1,145 inc VAT for homes); minimum job £625
- Survey
- Free, with a fixed written quote
- Nearby
- Sandhurst (1.9 mi), Crowthorne (2.5 mi), Camberley (3.8 mi), Fleet (4.1 mi)
What Yateley sites use steel security bollards for
Common uses in a place like Yateley:
- Protecting meter boxes, gas kiosks, pillars and corners
- Stopping cut-through traffic on private roads and estates
- Lines between pedestrian routes and service yards
Yateley: typical steel security bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £205–£515 + VAT · £245–£615 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £425–£745 + VAT · £505–£885 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £655–£945 + VAT · £785–£1,145 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; +6% for South East. Guide only — the fixed price follows a survey.
Permissions and groundwork in Yateley
In Yateley, work on adopted pavements and verges needs consent from Hampshire County Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
If your site in Yateley is listed or inside a conservation area, check with the local planning authority (the council for Hart) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Verges are often softer than they look, and the edges of car parks may be thin tarmac over hardcore, so the foundation is sized to the ground found. Root-fixed posts need firm ground and enough depth to carry the post's root plus a concrete surround.
- Do not describe unrated posts as anti-ram or HVM protection in risk assessments or to insurers.
- Keep clear gaps of typically at least 1,000–1,200 mm where pedestrians, wheelchair users or buggies pass between posts.
Installation, step by step
Set the posts
Posts are set plumb and to a consistent height along the line, and concreted in. Base-plated posts are drilled, anchored with resin and torqued once cured.
Fill and cap
Where specified, posts are filled with concrete and capped so water cannot collect inside the tube.
Reinstate and finish
The surface around each post is made good to match, and reflective bands are fitted. Damaged galvanising from handling is touched up.
Options to consider
| Option | Detail |
|---|---|
| Root-fixed | Cast into a concrete foundation, typically with several hundred millimetres of post below ground. The usual choice where digging is possible. |
| Base-plated | Bolted to a sound concrete slab with resin anchors. Quick to fit and easy to remove later, suited to light-duty and indoor use. |
| Tube size and wall thickness | Common diameters include 76, 114, 140, 168 and 219 mm, with heavier walls for service yards and vehicle routes. |
What moves the price in Yateley
Two Yateley jobs with the same number of posts can price quite differently. The usual reasons:
- Ground conditions and buried services
- Finish: galvanised only or powder-coated
- Root-fixed or base-plated installation
Keeping them working
Galvanised steel posts need little attention for years at a time. Powder coat chipped by vehicles should be touched up before the galvanising underneath starts to weather.
If posts in Yateley are later hit or damaged, we can repair or replace them — see bollard repairs.
Questions about steel security bollards in Yateley
Can you install steel security bollards anywhere in Yateley?
We cover all of Yateley (GU46 and GU17) and the rest of Hampshire. We also work in Sandhurst, Crowthorne and Camberley.
Who gives permission for bollards on the pavement in Yateley?
Hampshire County Council is the highway authority covering Yateley's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
How much do steel security bollards cost in Yateley?
In Yateley, typically £205–£945 per bollard, supplied and installed, plus VAT (£245–£1,145 including VAT for homeowners), with a minimum job of £625 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
Can new posts match our existing ones?
Usually, if we can measure the existing diameter, height, cap and colour. Galvanised steel in standard sizes is easy to match; older or unusual sections may need a close equivalent.
Why fill a steel bollard with concrete?
Concrete infill adds weight and stiffness, so the post dents less and is harder to cut. It also stops water collecting inside a hollow tube. It is usual for security and impact positions.
Steel security bollards in nearby towns
- Sandhurst (1.9 mi)
- Crowthorne (2.5 mi)
- Camberley (3.8 mi)
- Fleet (4.1 mi)
- Farnborough (4.7 mi)
- Wokingham (4.7 mi)