Rhondda Cynon Taf · Wales
Steel security bollard installation in Mountain Ash
Local installation of steel security bollards in Mountain Ash — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageSteel security bollards in Mountain Ash
Unrated steel bollards have not been crash-tested, so they deter vehicles and stop low-speed knocks and casual misuse rather than a determined attack. In Mountain Ash, that tends to mean sites such as filling-station forecourts, small industrial units and community car parks.
We work across CF45 — Mountain Ash itself and places including Abercynon. Nearby, we also work in Rhondda (3.4 miles), Treharris (3.4 miles), Aberdare (3.6 miles) and Merthyr Tydfil (4.4 miles), measured as the crow flies. Mountain Ash is about 16 miles from Cardiff.
Key facts for this area
- Area
- Rhondda Cynon Taf, Wales
- Highway authority
- Rhondda Cynon Taf County Borough Council (local roads)
- Planning authority
- Rhondda Cynon Taf County Borough Council
- Postcodes
- CF45
- Guide price
- Typically £185–£865 per bollard + VAT (£215–£1,045 inc VAT for homes); minimum job £575
- Survey
- Free, with a fixed written quote
- Nearby
- Rhondda (3.4 mi), Treharris (3.4 mi), Aberdare (3.6 mi), Merthyr Tydfil (4.4 mi)
Mountain Ash: typical steel security bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £185–£475 + VAT · £215–£565 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £395–£675 + VAT · £465–£805 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £595–£865 + VAT · £705–£1,045 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; -3% for Wales. Guide only — the fixed price follows a survey.
Steel security bollards in Mountain Ash: common uses
Typical reasons Mountain Ash sites choose steel security bollards:
- Grass verges and landscaped areas that vans keep driving over
- Stopping cut-through traffic on private roads and estates
- Forecourts and building entrances needing a visible boundary
Consents, ground and services in Mountain Ash
Before digging near the kerb in Mountain Ash we establish who owns the ground: adopted footways are Rhondda Cynon Taf County Borough Council's responsibility, trunk roads the Welsh Government's, and everything else belongs to the site owner.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (Rhondda Cynon Taf County Borough Council) first — we flag this at survey.
Reinstatement matches the surface, whether tarmac, block paving, flags or turf. Service runs commonly follow kerb lines and verges, which is exactly where steel posts tend to go, so positions are checked with records and scanning before digging.
- Do not describe unrated posts as anti-ram or HVM protection in risk assessments or to insurers.
- Keep clear gaps of typically at least 1,000–1,200 mm where pedestrians, wheelchair users or buggies pass between posts.
From survey to handover
Survey and set out
A free site survey confirms positions, surfaces, buried services and whether root-fixing or base plates suit the ground. You receive a fixed written quote listing post size, finish and fixing.
Set the posts
Posts are set plumb and to a consistent height along the line, and concreted in. Base-plated posts are drilled, anchored with resin and torqued once cured.
Reinstate and finish
The surface around each post is made good to match, and reflective bands are fitted. Damaged galvanising from handling is touched up.
Options to consider
| Option | Detail |
|---|---|
| Caps and heads | Dome, flat, chamfered or ball tops, with welded caps to keep water out of hollow posts. |
| Tube size and wall thickness | Common diameters include 76, 114, 140, 168 and 219 mm, with heavier walls for service yards and vehicle routes. |
| Visibility bands | Reflective or contrasting bands near the top for drivers at night and for partially sighted pedestrians. |
What moves the price in Mountain Ash
Two Mountain Ash jobs with the same number of posts can price quite differently. The usual reasons:
- Finish: galvanised only or powder-coated
- Root-fixed or base-plated installation
- Surface reinstatement such as block paving or tarmac
Keeping them working
Check periodically for impact damage, loose base plates and cracked surfacing around the root. Reflective bands fade and peel and are easy to renew.
We can also service, repair or replace existing posts anywhere in Mountain Ash.
Steel security bollards in Mountain Ash: FAQs
Do you install steel security bollards in Mountain Ash?
We cover all of Mountain Ash (CF45) and the rest of Rhondda Cynon Taf. We also work in Rhondda, Treharris and Aberdare.
Who gives permission for bollards on the pavement in Mountain Ash?
In Mountain Ash the highway authority for local roads is Rhondda Cynon Taf County Borough Council. We confirm whether the ground is adopted highway before quoting, because steel security bollards on a public footway need its agreement first.
What's a typical price for steel security bollards in Mountain Ash?
In Mountain Ash, typically £185–£865 per bollard, supplied and installed, plus VAT (£215–£1,045 including VAT for homeowners), with a minimum job of £575 plus VAT, using our Wales guide prices. The fixed figure comes in writing after we've seen the site.
What diameter of steel bollard do I need?
Match it to the job. Around 114 mm suits car park walkways and verges; 168 or 219 mm with a heavier wall suits service yards and corners that lorries pass. The survey looks at what is likely to hit the posts.
Why fill a steel bollard with concrete?
Concrete infill adds weight and stiffness, so the post dents less and is harder to cut. It also stops water collecting inside a hollow tube. It is usual for security and impact positions.
Steel security bollards in nearby towns
- Rhondda (3.4 mi)
- Treharris (3.4 mi)
- Aberdare (3.6 mi)
- Merthyr Tydfil (4.4 mi)
- Pontypridd (5.9 mi)
- Bargoed (6.3 mi)