Bridgend · Wales
Telescopic bollard installation in Maesteg
Telescopic bollards for sites across Maesteg and the rest of Bridgend, from the first measurement to the last relaid paving block.
Computer-generated imageAbout telescopic bollards in Maesteg
Across Maesteg, typical sites for telescopic bollards include small industrial units, local parades and high street shopfronts. Because the post stays in its cassette, there is nothing to store and nothing to lose.
We work across CF34 — Maesteg itself and places including Pont Rhyd-y-cyff and Llangynwyd. We also cover neighbouring Port Talbot (6.2 miles), Pyle (6.6 miles), Neath (7.3 miles) and Bridgend (7.9 miles) — distances are straight-line. It sits roughly 12 miles from Swansea as the crow flies.
Maesteg at a glance
- Area
- Bridgend, Wales
- Highway authority
- Bridgend County Borough Council (local roads)
- Planning authority
- Bridgend County Borough Council
- Postcodes
- CF34
- Guide price
- Typically £335–£1,145 per bollard + VAT (£395–£1,345 inc VAT for homes); minimum job £625
- Survey
- Free, with a fixed written quote
- Nearby
- Port Talbot (6.2 mi), Pyle (6.6 mi), Neath (7.3 mi), Bridgend (7.9 mi)
What telescopic bollards cost in Maesteg
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £335–£685 + VAT · £395–£815 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £585–£925 + VAT · £695–£1,095 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £825–£1,145 + VAT · £985–£1,345 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with cassette, supplied and installed; -3% for Wales. Guide only — the fixed price follows a survey.
Typical telescopic bollards jobs in Maesteg
Common uses in a place like Maesteg:
- Car parks where a removable post would go missing
- Shared drives that need occasional closing
- Sites with no power for automatic bollards
Before we dig in Maesteg
Local roads and pavements in Maesteg are the responsibility of Bridgend County Borough Council as highway authority, with the Welsh Government's trunk road agents handling trunk roads. Posts on the public highway need that authority's consent; private land does not.
Many private-land installations in Maesteg need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at Bridgend County Borough Council before posts go in.
Drives commonly hide the water supply pipe, gas service, electric cable and drainage runs, often at shallow depth, and they cluster near the property boundary where posts are usually wanted. Clay soils and high water tables mean a gravel base alone will not drain the cassette; a connection to a surface water drain or a separate soakaway is then needed, and foul drains are not used.
- If the drive is shared, agree positions and keys with the other users first.
- Connect drainage only to surface water systems or a soakaway, never to a foul drain.
From survey to handover
Check depth and drainage
The free site survey checks how far down we can dig, where services run under the drive and how the ground drains. If water will stand, a drain connection is priced into the fixed written quote.
Cut and excavate
The surface is cut neatly and the hole dug to the cassette's full depth plus a drainage layer, with care near any service that crosses the drive.
Form the drainage
A gravel soakaway is placed beneath the cassette, or a pipe is laid to a surface water drain or new soakaway.
Choosing the right spec
| Option | Detail |
|---|---|
| Reflective bands | Bands near the top help drivers see a raised post at night, particularly on drives shared with visitors. |
| Diameter and height | Commonly around 90–140 mm diameter and 600–900 mm raised height, with larger posts for commercial use. |
| Lock types | Keyed cylinder locks, often with a cover to keep out dirt; keyed alike for multi-bay sites where one key should open every post. |
Pricing telescopic bollards in Maesteg
Two Maesteg jobs with the same number of posts can price quite differently. The usual reasons:
- Excavation depth and the presence of services under the drive
- Drainage: simple soakaway or a connection to a drain
- Number of posts and keyed-alike locks
Looking after them
If the post becomes stiff or will not lower fully, the usual causes are debris in the cassette or a blocked drain, both of which are easier to fix early than after the post has seized. Lower and raise the bollard regularly, even if you rarely need to, so the mechanism stays free.
We can also service, repair or replace existing posts anywhere in Maesteg.
Telescopic bollards in Maesteg: FAQs
Can you install telescopic bollards anywhere in Maesteg?
We cover all of Maesteg (CF34) and the rest of Bridgend. We also work in Port Talbot, Pyle and Neath.
Who gives permission for bollards on the pavement in Maesteg?
Before digging near the kerb in Maesteg we establish who owns the ground: adopted footways are Bridgend County Borough Council's responsibility, trunk roads the Welsh Government's, and everything else belongs to the site owner.
How much do telescopic bollards cost in Maesteg?
In Maesteg, typically £335–£1,145 per bollard with cassette, supplied and installed, plus VAT (£395–£1,345 including VAT for homeowners), with a minimum job of £625 plus VAT, using our Wales guide prices. The fixed figure comes in writing after we've seen the site.
Is a telescopic bollard harder to lift than a removable one?
Usually easier, because you only lift it up a short distance within its cassette and many models have lift assistance. You also never carry it or store it anywhere.
Why does my telescopic bollard fill with water?
Because the cassette is not draining, either through a blocked base, clay ground or no drainage provision at installation. Standing water rusts the post and can freeze it in place. Fixing the drainage usually solves the problem.