Caerphilly · Wales
Telescopic bollard installation in Abercarn
Telescopic bollards for sites across Abercarn and the rest of Caerphilly, from the first measurement to the last relaid paving block.
Computer-generated imageAbout telescopic bollards in Abercarn
We supply and fit telescopic bollards throughout Abercarn, typically for sites such as residential driveways, local parades and schools. Because the post stays in its cassette, there is nothing to store and nothing to lose.
We work across NP11 — Abercarn itself and places including Cwmfelinfach, Pen-tŵyn, Swffryd and Ynysddu. Jobs in Abercarn can be combined with work in Risca (3.1 miles), Blackwood (3.4 miles), Cwmbran (4.8 miles) and Bargoed (4.9 miles) (straight-line distances). Abercarn is about 12 miles from Cardiff.
Local details
- Area
- Caerphilly, Wales
- Highway authority
- Caerphilly County Borough Council (local roads)
- Planning authority
- Caerphilly County Borough Council
- Postcodes
- NP11
- Guide price
- Typically £335–£1,145 per bollard + VAT (£395–£1,345 inc VAT for homes); minimum job £625
- Survey
- Free, with a fixed written quote
Guide prices for Abercarn
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £335–£685 + VAT · £395–£815 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £585–£925 + VAT · £695–£1,095 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £825–£1,145 + VAT · £985–£1,345 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with cassette, supplied and installed; -3% for Wales. Guide only — the fixed price follows a survey.
What Abercarn sites use telescopic bollards for
Typical reasons Abercarn sites choose telescopic bollards:
- Car parks where a removable post would go missing
- Access roads closed outside working hours
- Allocated parking bays in flats and private developments
What we check first in Abercarn
In Abercarn the highway authority for local roads is Caerphilly County Borough Council. We confirm whether the ground is adopted highway before quoting, because telescopic bollards on a public footway need its agreement first.
If your site in Abercarn is listed or inside a conservation area, check with the local planning authority (Caerphilly County Borough Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Drives commonly hide the water supply pipe, gas service, electric cable and drainage runs, often at shallow depth, and they cluster near the property boundary where posts are usually wanted. Positions are scanned and hand-dug before committing.
- If the drive is shared, agree positions and keys with the other users first.
- Confirm the bollard is on your land; bollards on a public footway or dropped kerb need the highway authority's agreement.
From survey to handover
Cut and excavate
The surface is cut neatly and the hole dug to the cassette's full depth plus a drainage layer, with care near any service that crosses the drive.
Form the drainage
A gravel soakaway is placed beneath the cassette, or a pipe is laid to a surface water drain or new soakaway.
Set the cassette
The cassette is set vertical and its top exactly at finished surface level and fall, then concreted in. A cassette set high or low is a common cause of tyre damage and trip edges.
Finishes and options
| Option | Detail |
|---|---|
| Lid and head designs | Flush hinged lids, removable caps or integrated heads that close the cassette top when lowered. |
| Diameter and height | Commonly around 90–140 mm diameter and 600–900 mm raised height, with larger posts for commercial use. |
| Finishes | Galvanised, powder-coated in common colours, or stainless steel to suit the frontage. |
Pricing telescopic bollards in Abercarn
Our Wales guide prices are a starting point; the survey in Abercarn firms them up. What tends to move them:
- Number of posts and keyed-alike locks
- Stainless or powder-coated finish
- Excavation depth and the presence of services under the drive
Keeping them working
Lower and raise the bollard regularly, even if you rarely need to, so the mechanism stays free. Clear leaves and grit from around the lid, and a few times a year lift the post fully and look into the cassette for standing water or silt.
If posts in Abercarn are later hit or damaged, we can repair or replace them — see bollard repairs.
Questions about telescopic bollards in Abercarn
Which parts of Abercarn do you cover for telescopic bollards?
We cover all of Abercarn (NP11) and the rest of Caerphilly. We also work in Risca, Blackwood and Cwmbran.
Who gives permission for bollards on the pavement in Abercarn?
Local roads and pavements in Abercarn are the responsibility of Caerphilly County Borough Council as highway authority, with the Welsh Government's trunk road agents handling trunk roads. Posts on the public highway need that authority's consent; private land does not.
How much do telescopic bollards cost in Abercarn?
In Abercarn, typically £335–£1,145 per bollard with cassette, supplied and installed, plus VAT (£395–£1,345 including VAT for homeowners), with a minimum job of £625 plus VAT, using our Wales guide prices. The fixed figure comes in writing after we've seen the site.
Can a telescopic bollard be fitted into a resin or imprinted drive?
Yes, though the cut has to be made cleanly and the surface patched around the lid. Resin and imprinted finishes are hard to match exactly, so we plan positions to keep visible patching small.
Is a telescopic bollard harder to lift than a removable one?
Usually easier, because you only lift it up a short distance within its cassette and many models have lift assistance. You also never carry it or store it anywhere.
Telescopic bollards near Abercarn
- Risca (3.1 mi)
- Blackwood (3.4 mi)
- Cwmbran (4.8 mi)
- Bargoed (4.9 mi)
- Pontypool (5.4 mi)
- Abertillery (5.7 mi)