Cumbria · England
Telescopic bollard installation in Kendal
Telescopic bollards for sites across Kendal and the rest of Cumbria, from the first measurement to the last relaid paving block.
Computer-generated imageKendal telescopic bollards
We supply and fit telescopic bollards throughout Kendal, typically for sites such as community car parks, small industrial units and high street shopfronts. Because the post stays in its cassette, there is nothing to store and nothing to lose.
Coverage in Kendal takes in the LA9 and LA8 postcode districts and nearby places like Burneside, Natland, Oxenholme and Skelsmergh. Nearby, we also work in Morecambe (18.4 miles) and Lancaster (19.5 miles), measured as the crow flies. Preston is around 39 miles away.
Local details
- Area
- Cumbria, England
- Highway authority
- Westmorland and Furness Council (local roads)
- Planning authority
- Westmorland and Furness Council
- Postcodes
- LA9 and LA8
- Guide price
- Typically £335–£1,195 per bollard + VAT (£395–£1,445 inc VAT for homes); minimum job £625
- Survey
- Free, with a fixed written quote
Guide prices for Kendal
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £335–£685 + VAT · £395–£815 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £585–£935 + VAT · £695–£1,095 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £835–£1,195 + VAT · £995–£1,445 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with cassette, supplied and installed; -2% for North West. Guide only — the fixed price follows a survey.
Typical telescopic bollards jobs in Kendal
Typical reasons Kendal sites choose telescopic bollards:
- Domestic driveways where the bollard is used daily
- Access roads closed outside working hours
- Sites with no power for automatic bollards
Before we dig in Kendal
Westmorland and Furness Council is the highway authority covering Kendal's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
If your site in Kendal is listed or inside a conservation area, check with the local planning authority (Westmorland and Furness Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Drives commonly hide the water supply pipe, gas service, electric cable and drainage runs, often at shallow depth, and they cluster near the property boundary where posts are usually wanted. Clay soils and high water tables mean a gravel base alone will not drain the cassette; a connection to a surface water drain or a separate soakaway is then needed, and foul drains are not used.
- Confirm the bollard is on your land; bollards on a public footway or dropped kerb need the highway authority's agreement.
- Leave access for emergency services on commercial and multi-occupancy sites, and record who holds keys.
What happens on site
Check depth and drainage
The free site survey checks how far down we can dig, where services run under the drive and how the ground drains. If water will stand, a drain connection is priced into the fixed written quote.
Cut and excavate
The surface is cut neatly and the hole dug to the cassette's full depth plus a drainage layer, with care near any service that crosses the drive.
Reinstate and test
The surface is made good to match. The post is raised, locked, lowered and locked several times to confirm smooth operation, and keys are handed over.
Options to consider
| Option | Detail |
|---|---|
| Diameter and height | Commonly around 90–140 mm diameter and 600–900 mm raised height, with larger posts for commercial use. |
| Lock types | Keyed cylinder locks, often with a cover to keep out dirt; keyed alike for multi-bay sites where one key should open every post. |
| Standard or lift-assisted | Lift-assisted models use a spring or counterweight so the post rises with little effort, useful for daily domestic use. |
What affects the quote
When we price telescopic bollards in Kendal, these make the biggest difference:
- Stainless or powder-coated finish
- Surface type and quality of reinstatement
- Post size and whether lift assistance is wanted
Looking after them
Clear leaves and grit from around the lid, and a few times a year lift the post fully and look into the cassette for standing water or silt. If the post becomes stiff or will not lower fully, the usual causes are debris in the cassette or a blocked drain, both of which are easier to fix early than after the post has seized.
We can also service, repair or replace existing posts anywhere in Kendal.
Common questions
Can you install telescopic bollards anywhere in Kendal?
We cover all of Kendal (LA9 and LA8) and the rest of Cumbria. We also work in Morecambe and Lancaster.
Who gives permission for bollards on the pavement in Kendal?
Westmorland and Furness Council is the highway authority covering Kendal's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
How much do telescopic bollards cost in Kendal?
In Kendal, typically £335–£1,195 per bollard with cassette, supplied and installed, plus VAT (£395–£1,445 including VAT for homeowners), with a minimum job of £625 plus VAT, using our North West guide prices. The fixed figure comes in writing after we've seen the site.
What if it freezes in winter?
Freezing usually means water is standing in the cassette. Do not force the post; pour warm, not boiling, water around the lid and lift once free. Then have the drainage checked.
Can a telescopic bollard be fitted into a resin or imprinted drive?
Yes, though the cut has to be made cleanly and the surface patched around the lid. Resin and imprinted finishes are hard to match exactly, so we plan positions to keep visible patching small.