Derbyshire · England
Telescopic bollard installation in Long Eaton
Telescopic bollards for sites across Long Eaton and the rest of Derbyshire, from the first measurement to the last relaid paving block.
Computer-generated imageLong Eaton telescopic bollards
Telescopic bollards suit plenty of Long Eaton sites, community car parks, small industrial units and filling-station forecourts among them. Key-locked telescopic bollards that retract into a ground cassette, for driveways, private bays and access roads.
We work across NG10 — Long Eaton itself and places including Sandiacre and Risley. Jobs in Long Eaton can be combined with work in Ilkeston (5.2 miles), Nottingham (6.3 miles), West Bridgford (6.5 miles) and Derby (8.7 miles) (straight-line distances). It sits roughly 6 miles from Nottingham as the crow flies.
Local details
- Area
- Derbyshire, England
- Highway authority
- Derbyshire County Council (local roads)
- Planning authority
- the council for Erewash
- Postcodes
- NG10
- Guide price
- Typically £335–£1,195 per bollard + VAT (£395–£1,445 inc VAT for homes); minimum job £625
- Survey
- Free, with a fixed written quote
- Nearby
- Ilkeston (5.2 mi), Nottingham (6.3 mi), West Bridgford (6.5 mi), Derby (8.7 mi)
What Long Eaton sites use telescopic bollards for
Around Long Eaton, telescopic bollards usually solve one of these:
- Commercial yards where posts must not be left lying around
- Sites with no power for automatic bollards
- Domestic driveways where the bollard is used daily
Guide prices for Long Eaton
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £335–£685 + VAT · £395–£815 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £585–£935 + VAT · £695–£1,095 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £835–£1,195 + VAT · £995–£1,445 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with cassette, supplied and installed; -2% for East Midlands. Guide only — the fixed price follows a survey.
What we check first in Long Eaton
The highway authority for local roads in Long Eaton is Derbyshire County Council; motorways and trunk roads sit with National Highways. Telescopic bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
Many private-land installations in Long Eaton need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at the council for Erewash before posts go in.
Positions are scanned and hand-dug before committing. Clay soils and high water tables mean a gravel base alone will not drain the cassette; a connection to a surface water drain or a separate soakaway is then needed, and foul drains are not used.
- If the drive is shared, agree positions and keys with the other users first.
- Connect drainage only to surface water systems or a soakaway, never to a foul drain.
Installation, step by step
Check depth and drainage
The free site survey checks how far down we can dig, where services run under the drive and how the ground drains. If water will stand, a drain connection is priced into the fixed written quote.
Form the drainage
A gravel soakaway is placed beneath the cassette, or a pipe is laid to a surface water drain or new soakaway.
Reinstate and test
The surface is made good to match. The post is raised, locked, lowered and locked several times to confirm smooth operation, and keys are handed over.
Options to consider
| Option | Detail |
|---|---|
| Finishes | Galvanised, powder-coated in common colours, or stainless steel to suit the frontage. |
| Lock types | Keyed cylinder locks, often with a cover to keep out dirt; keyed alike for multi-bay sites where one key should open every post. |
| Diameter and height | Commonly around 90–140 mm diameter and 600–900 mm raised height, with larger posts for commercial use. |
What moves the price in Long Eaton
Two Long Eaton jobs with the same number of posts can price quite differently. The usual reasons:
- Surface type and quality of reinstatement
- Post size and whether lift assistance is wanted
- Excavation depth and the presence of services under the drive
Keeping them working
Clear leaves and grit from around the lid, and a few times a year lift the post fully and look into the cassette for standing water or silt. Lubricate the lock with a suitable spray, especially before winter.
For damaged or loose posts in Long Eaton, repairs and replacements are priced in writing first.
Telescopic bollards in Long Eaton: FAQs
Which parts of Long Eaton do you cover for telescopic bollards?
We cover all of Long Eaton (NG10) and the rest of Derbyshire. We also work in Ilkeston, Nottingham and West Bridgford.
Who gives permission for bollards on the pavement in Long Eaton?
Derbyshire County Council is the highway authority covering Long Eaton's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
What's a typical price for telescopic bollards in Long Eaton?
In Long Eaton, typically £335–£1,195 per bollard with cassette, supplied and installed, plus VAT (£395–£1,445 including VAT for homeowners), with a minimum job of £625 plus VAT, using our East Midlands guide prices. The fixed figure comes in writing after we've seen the site.
How deep does a telescopic bollard go into the ground?
Usually around the exposed height of the post plus the cassette base and drainage layer, which often comes to a metre or more. The exact depth depends on the model. That depth is why we check for services under the drive first.
Will a telescopic bollard stop my car being stolen?
It adds a physical barrier that a thief has to defeat before driving away, which slows them down and makes the car a less attractive target. It is one layer of protection, not a complete answer to keyless car theft.
Telescopic bollards in nearby towns
- Ilkeston (5.2 mi)
- Nottingham (6.3 mi)
- West Bridgford (6.5 mi)
- Derby (8.7 mi)
- Heanor (8.7 mi)
- Arnold (9.1 mi)