Devon · England
Telescopic bollard installation in Barnstaple
Telescopic bollards for sites across Barnstaple and the rest of Devon, from the first measurement to the last relaid paving block.
Computer-generated imageTelescopic bollards in Barnstaple
Whether it's residential driveways, small industrial units and local parades, telescopic bollards in Barnstaple are planned around who needs to get through and who doesn't. Because the post stays in its cassette, there is nothing to store and nothing to lose.
Coverage in Barnstaple takes in the EX31, EX32 and EX33 postcode districts and nearby places like Fremington, Yelland, Bickington and Chivenor. Jobs in Barnstaple can be combined with work in Bideford (7.9 miles) (straight-line distances).
Barnstaple at a glance
- Area
- Devon, England
- Highway authority
- Devon County Council (local roads)
- Planning authority
- the council for North Devon
- Postcodes
- EX31, EX32 and EX33
- Guide price
- Typically £345–£1,195 per bollard + VAT (£405–£1,445 inc VAT for homes); minimum job £645
- Survey
- Free, with a fixed written quote
- Nearby
- Bideford (7.9 mi)
Telescopic bollards in Barnstaple: common uses
Typical reasons Barnstaple sites choose telescopic bollards:
- Car parks where a removable post would go missing
- Access roads closed outside working hours
- Shared drives that need occasional closing
What telescopic bollards cost in Barnstaple
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £345–£705 + VAT · £405–£845 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £605–£955 + VAT · £725–£1,145 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £855–£1,195 + VAT · £1,045–£1,445 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with cassette, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
What we check first in Barnstaple
Devon County Council is the highway authority covering Barnstaple's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (the council for North Devon) first — we flag this at survey.
Telescopic bollards need a deeper excavation than other manual bollards, so ground and services decide where they can go. Drives commonly hide the water supply pipe, gas service, electric cable and drainage runs, often at shallow depth, and they cluster near the property boundary where posts are usually wanted.
- If the drive is shared, agree positions and keys with the other users first.
- Leave access for emergency services on commercial and multi-occupancy sites, and record who holds keys.
Installation, step by step
Check depth and drainage
The free site survey checks how far down we can dig, where services run under the drive and how the ground drains. If water will stand, a drain connection is priced into the fixed written quote.
Cut and excavate
The surface is cut neatly and the hole dug to the cassette's full depth plus a drainage layer, with care near any service that crosses the drive.
Form the drainage
A gravel soakaway is placed beneath the cassette, or a pipe is laid to a surface water drain or new soakaway.
Options to consider
| Option | Detail |
|---|---|
| Reflective bands | Bands near the top help drivers see a raised post at night, particularly on drives shared with visitors. |
| Diameter and height | Commonly around 90–140 mm diameter and 600–900 mm raised height, with larger posts for commercial use. |
| Lock types | Keyed cylinder locks, often with a cover to keep out dirt; keyed alike for multi-bay sites where one key should open every post. |
What moves the price in Barnstaple
Our South West guide prices are a starting point; the survey in Barnstaple firms them up. What tends to move them:
- Excavation depth and the presence of services under the drive
- Surface type and quality of reinstatement
- Number of posts and keyed-alike locks
Looking after them
Lubricate the lock with a suitable spray, especially before winter. If the post becomes stiff or will not lower fully, the usual causes are debris in the cassette or a blocked drain, both of which are easier to fix early than after the post has seized.
We can also service, repair or replace existing posts anywhere in Barnstaple.
Common questions
Do you install telescopic bollards in Barnstaple?
We cover all of Barnstaple (EX31, EX32 and EX33) and the rest of Devon. We also work in Bideford.
Do I need consent for telescopic bollards on a public footway in Barnstaple?
In Barnstaple, work on adopted pavements and verges needs consent from Devon County Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
What's a typical price for telescopic bollards in Barnstaple?
In Barnstaple, typically £345–£1,195 per bollard with cassette, supplied and installed, plus VAT (£405–£1,445 including VAT for homeowners), with a minimum job of £645 plus VAT, using our South West guide prices. The fixed figure comes in writing after we've seen the site.
How deep does a telescopic bollard go into the ground?
Usually around the exposed height of the post plus the cassette base and drainage layer, which often comes to a metre or more. The exact depth depends on the model. That depth is why we check for services under the drive first.
Can a telescopic bollard be fitted into a resin or imprinted drive?
Yes, though the cut has to be made cleanly and the surface patched around the lid. Resin and imprinted finishes are hard to match exactly, so we plan positions to keep visible patching small.