Essex · England
Telescopic bollard installation in Pitsea
Telescopic bollards for sites across Pitsea and the rest of Essex, from the first measurement to the last relaid paving block.
Computer-generated imageTelescopic bollards in Pitsea
Whether it's small industrial units, filling-station forecourts and community car parks, telescopic bollards in Pitsea are planned around who needs to get through and who doesn't. Key-locked telescopic bollards that retract into a ground cassette, for driveways, private bays and access roads.
We cover Pitsea's SS13 postcode district, including places such as North Benfleet and Bowers Gifford. Nearby, we also work in Basildon (2.2 miles), South Benfleet (2.3 miles), Wickford (3.3 miles) and Canvey Island (4.2 miles), measured as the crow flies. Pitsea is about 9 miles from Southend-on-Sea.
Local details
- Area
- Essex, England
- Highway authority
- Essex County Council (local roads)
- Planning authority
- the council for Basildon
- Postcodes
- SS13
- Guide price
- Typically £355–£1,245 per bollard + VAT (£425–£1,495 inc VAT for homes); minimum job £655
- Survey
- Free, with a fixed written quote
- Nearby
- Basildon (2.2 mi), South Benfleet (2.3 mi), Wickford (3.3 mi), Canvey Island (4.2 mi)
What Pitsea sites use telescopic bollards for
Around Pitsea, telescopic bollards usually solve one of these:
- Domestic driveways where the bollard is used daily
- Car parks where a removable post would go missing
- Shared drives that need occasional closing
What telescopic bollards cost in Pitsea
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £355–£725 + VAT · £425–£865 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £615–£985 + VAT · £735–£1,195 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £885–£1,245 + VAT · £1,045–£1,495 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with cassette, supplied and installed; +3% for East of England. Guide only — the fixed price follows a survey.
What we check first in Pitsea
The highway authority for local roads in Pitsea is Essex County Council; motorways and trunk roads sit with National Highways. Telescopic bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (the council for Basildon) first — we flag this at survey.
Reinstatement matches the drive, whether block paving, tarmac, resin-bound or imprinted concrete. Clay soils and high water tables mean a gravel base alone will not drain the cassette; a connection to a surface water drain or a separate soakaway is then needed, and foul drains are not used.
- If the drive is shared, agree positions and keys with the other users first.
- Confirm the bollard is on your land; bollards on a public footway or dropped kerb need the highway authority's agreement.
How the job runs
Check depth and drainage
The free site survey checks how far down we can dig, where services run under the drive and how the ground drains. If water will stand, a drain connection is priced into the fixed written quote.
Cut and excavate
The surface is cut neatly and the hole dug to the cassette's full depth plus a drainage layer, with care near any service that crosses the drive.
Set the cassette
The cassette is set vertical and its top exactly at finished surface level and fall, then concreted in. A cassette set high or low is a common cause of tyre damage and trip edges.
Options to consider
| Option | Detail |
|---|---|
| Diameter and height | Commonly around 90–140 mm diameter and 600–900 mm raised height, with larger posts for commercial use. |
| Lid and head designs | Flush hinged lids, removable caps or integrated heads that close the cassette top when lowered. |
| Standard or lift-assisted | Lift-assisted models use a spring or counterweight so the post rises with little effort, useful for daily domestic use. |
Pricing telescopic bollards in Pitsea
Two Pitsea jobs with the same number of posts can price quite differently. The usual reasons:
- Number of posts and keyed-alike locks
- Post size and whether lift assistance is wanted
- Stainless or powder-coated finish
Looking after them
Lubricate the lock with a suitable spray, especially before winter. Lower and raise the bollard regularly, even if you rarely need to, so the mechanism stays free.
For damaged or loose posts in Pitsea, repairs and replacements are priced in writing first.
Questions about telescopic bollards in Pitsea
Do you install telescopic bollards in Pitsea?
We cover all of Pitsea (SS13) and the rest of Essex. We also work in Basildon, South Benfleet and Wickford.
Who gives permission for bollards on the pavement in Pitsea?
The highway authority for local roads in Pitsea is Essex County Council; motorways and trunk roads sit with National Highways. Telescopic bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
What's a typical price for telescopic bollards in Pitsea?
In Pitsea, typically £355–£1,245 per bollard with cassette, supplied and installed, plus VAT (£425–£1,495 including VAT for homeowners), with a minimum job of £655 plus VAT, using our East of England guide prices. The fixed figure comes in writing after we've seen the site.
How deep does a telescopic bollard go into the ground?
Usually around the exposed height of the post plus the cassette base and drainage layer, which often comes to a metre or more. The exact depth depends on the model. That depth is why we check for services under the drive first.
What if it freezes in winter?
Freezing usually means water is standing in the cassette. Do not force the post; pour warm, not boiling, water around the lid and lift once free. Then have the drainage checked.
Telescopic bollards near Pitsea
- Basildon (2.2 mi)
- South Benfleet (2.3 mi)
- Wickford (3.3 mi)
- Canvey Island (4.2 mi)
- Stanford-le-Hope (4.3 mi)
- Rayleigh (4.4 mi)