Hampshire · England
Telescopic bollard installation in Aldershot
Local installation of telescopic bollards in Aldershot — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageAbout telescopic bollards in Aldershot
Whether it's small industrial units, high street shopfronts and residential driveways, telescopic bollards in Aldershot are planned around who needs to get through and who doesn't. Key-locked telescopic bollards that retract into a ground cassette, for driveways, private bays and access roads.
Coverage in Aldershot takes in the GU11 postcode district. Nearby, we also work in Farnham (2.8 miles), Farnborough (3.2 miles), Fleet (3.9 miles) and Camberley (6.2 miles), measured as the crow flies. Reading is around 17 miles away.
Key facts for this area
- Area
- Hampshire, England
- Highway authority
- Hampshire County Council (local roads)
- Planning authority
- the council for Rushmoor
- Postcodes
- GU11
- Guide price
- Typically £365–£1,245 per bollard + VAT (£435–£1,495 inc VAT for homes); minimum job £675
- Survey
- Free, with a fixed written quote
- Nearby
- Farnham (2.8 mi), Farnborough (3.2 mi), Fleet (3.9 mi), Camberley (6.2 mi)
What Aldershot sites use telescopic bollards for
Typical reasons Aldershot sites choose telescopic bollards:
- Shared drives that need occasional closing
- Sites with no power for automatic bollards
- Car parks where a removable post would go missing
Guide prices for Aldershot
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £365–£745 + VAT · £435–£885 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £635–£995 + VAT · £755–£1,195 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £905–£1,245 + VAT · £1,095–£1,495 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with cassette, supplied and installed; +6% for South East. Guide only — the fixed price follows a survey.
What we check first in Aldershot
In Aldershot, work on adopted pavements and verges needs consent from Hampshire County Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (the council for Rushmoor) first — we flag this at survey.
Telescopic bollards need a deeper excavation than other manual bollards, so ground and services decide where they can go. Positions are scanned and hand-dug before committing.
- If the drive is shared, agree positions and keys with the other users first.
- Connect drainage only to surface water systems or a soakaway, never to a foul drain.
From survey to handover
Check depth and drainage
The free site survey checks how far down we can dig, where services run under the drive and how the ground drains. If water will stand, a drain connection is priced into the fixed written quote.
Form the drainage
A gravel soakaway is placed beneath the cassette, or a pipe is laid to a surface water drain or new soakaway.
Set the cassette
The cassette is set vertical and its top exactly at finished surface level and fall, then concreted in. A cassette set high or low is a common cause of tyre damage and trip edges.
Choosing the right spec
| Option | Detail |
|---|---|
| Finishes | Galvanised, powder-coated in common colours, or stainless steel to suit the frontage. |
| Lock types | Keyed cylinder locks, often with a cover to keep out dirt; keyed alike for multi-bay sites where one key should open every post. |
| Reflective bands | Bands near the top help drivers see a raised post at night, particularly on drives shared with visitors. |
Pricing telescopic bollards in Aldershot
Two Aldershot jobs with the same number of posts can price quite differently. The usual reasons:
- Surface type and quality of reinstatement
- Stainless or powder-coated finish
- Drainage: simple soakaway or a connection to a drain
After installation
Lower and raise the bollard regularly, even if you rarely need to, so the mechanism stays free. If the post becomes stiff or will not lower fully, the usual causes are debris in the cassette or a blocked drain, both of which are easier to fix early than after the post has seized.
For damaged or loose posts in Aldershot, repairs and replacements are priced in writing first.
Telescopic bollards in Aldershot: FAQs
Which parts of Aldershot do you cover for telescopic bollards?
We cover all of Aldershot (GU11) and the rest of Hampshire. We also work in Farnham, Farnborough and Fleet.
Who gives permission for bollards on the pavement in Aldershot?
The highway authority for local roads in Aldershot is Hampshire County Council; motorways and trunk roads sit with National Highways. Telescopic bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
How much do telescopic bollards cost in Aldershot?
In Aldershot, typically £365–£1,245 per bollard with cassette, supplied and installed, plus VAT (£435–£1,495 including VAT for homeowners), with a minimum job of £675 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
What if it freezes in winter?
Freezing usually means water is standing in the cassette. Do not force the post; pour warm, not boiling, water around the lid and lift once free. Then have the drainage checked.
Why does my telescopic bollard fill with water?
Because the cassette is not draining, either through a blocked base, clay ground or no drainage provision at installation. Standing water rusts the post and can freeze it in place. Fixing the drainage usually solves the problem.
Telescopic bollards near Aldershot
- Farnham (2.8 mi)
- Farnborough (3.2 mi)
- Fleet (3.9 mi)
- Camberley (6.2 mi)
- Sandhurst (6.9 mi)
- Yateley (7.1 mi)