Isle of Anglesey · Wales
Telescopic bollard installation in Holyhead
Telescopic bollards for sites across Holyhead and the rest of Isle of Anglesey, from the first measurement to the last relaid paving block.
Computer-generated imageAbout telescopic bollards in Holyhead
Across Holyhead, typical sites for telescopic bollards include filling-station forecourts, community car parks and high street shopfronts. Key-locked telescopic bollards that retract into a ground cassette, for driveways, private bays and access roads.
Coverage in Holyhead takes in the LL65 postcode district and nearby places like Trearddur, Bodedern, Bryngwran and Llanfihangel yn Nhowyn. There are no other towns of Holyhead's size close by, so crews travel in specifically for jobs here.
Local details
- Area
- Isle of Anglesey, Wales
- Highway authority
- Isle of Anglesey County Council (local roads)
- Planning authority
- Isle of Anglesey County Council
- Postcodes
- LL65
- Guide price
- Typically £335–£1,145 per bollard + VAT (£395–£1,345 inc VAT for homes); minimum job £625
- Survey
- Free, with a fixed written quote
What Holyhead sites use telescopic bollards for
Common uses in a place like Holyhead:
- Commercial yards where posts must not be left lying around
- Domestic driveways where the bollard is used daily
- Allocated parking bays in flats and private developments
Guide prices for Holyhead
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £335–£685 + VAT · £395–£815 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £585–£925 + VAT · £695–£1,095 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £825–£1,145 + VAT · £985–£1,345 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with cassette, supplied and installed; -3% for Wales. Guide only — the fixed price follows a survey.
Consents, ground and services in Holyhead
Before digging near the kerb in Holyhead we establish who owns the ground: adopted footways are Isle of Anglesey County Council's responsibility, trunk roads the Welsh Government's, and everything else belongs to the site owner.
Many private-land installations in Holyhead need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at Isle of Anglesey County Council before posts go in.
Positions are scanned and hand-dug before committing. Clay soils and high water tables mean a gravel base alone will not drain the cassette; a connection to a surface water drain or a separate soakaway is then needed, and foul drains are not used.
- Leave access for emergency services on commercial and multi-occupancy sites, and record who holds keys.
- If the drive is shared, agree positions and keys with the other users first.
How the job runs
Cut and excavate
The surface is cut neatly and the hole dug to the cassette's full depth plus a drainage layer, with care near any service that crosses the drive.
Form the drainage
A gravel soakaway is placed beneath the cassette, or a pipe is laid to a surface water drain or new soakaway.
Reinstate and test
The surface is made good to match. The post is raised, locked, lowered and locked several times to confirm smooth operation, and keys are handed over.
Specification choices
| Option | Detail |
|---|---|
| Lock types | Keyed cylinder locks, often with a cover to keep out dirt; keyed alike for multi-bay sites where one key should open every post. |
| Reflective bands | Bands near the top help drivers see a raised post at night, particularly on drives shared with visitors. |
| Finishes | Galvanised, powder-coated in common colours, or stainless steel to suit the frontage. |
What affects the quote
Our Wales guide prices are a starting point; the survey in Holyhead firms them up. What tends to move them:
- Excavation depth and the presence of services under the drive
- Drainage: simple soakaway or a connection to a drain
- Post size and whether lift assistance is wanted
After installation
Clear leaves and grit from around the lid, and a few times a year lift the post fully and look into the cassette for standing water or silt. If the post becomes stiff or will not lower fully, the usual causes are debris in the cassette or a blocked drain, both of which are easier to fix early than after the post has seized.
If posts in Holyhead are later hit or damaged, we can repair or replace them — see bollard repairs.
Common questions
Do you install telescopic bollards in Holyhead?
We cover all of Holyhead (LL65) and the rest of Isle of Anglesey.
Do I need consent for telescopic bollards on a public footway in Holyhead?
In Holyhead the highway authority for local roads is Isle of Anglesey County Council. We confirm whether the ground is adopted highway before quoting, because telescopic bollards on a public footway need its agreement first.
How much do telescopic bollards cost in Holyhead?
In Holyhead, typically £335–£1,145 per bollard with cassette, supplied and installed, plus VAT (£395–£1,345 including VAT for homeowners), with a minimum job of £625 plus VAT, using our Wales guide prices. The fixed figure comes in writing after we've seen the site.
How deep does a telescopic bollard go into the ground?
Usually around the exposed height of the post plus the cassette base and drainage layer, which often comes to a metre or more. The exact depth depends on the model. That depth is why we check for services under the drive first.
Will a telescopic bollard stop my car being stolen?
It adds a physical barrier that a thief has to defeat before driving away, which slows them down and makes the car a less attractive target. It is one layer of protection, not a complete answer to keyless car theft.