Isle of Wight · England
Telescopic bollard installation in Sandown
Telescopic bollards for sites across Sandown and the rest of Isle of Wight, from the first measurement to the last relaid paving block.
Computer-generated imageTelescopic bollards in Sandown
We supply and fit telescopic bollards throughout Sandown, typically for sites such as community car parks, schools and small industrial units. Key-locked telescopic bollards that retract into a ground cassette, for driveways, private bays and access roads.
Coverage in Sandown takes in the PO36, PO37, PO35 and PO38 postcode districts and nearby places like Brading, Alverstone Garden Village, Yaverland and Apse Heath. We also cover neighbouring Ryde (5.4 miles), Newport, Isle of Wight (6.7 miles) and Cowes (9.7 miles) — distances are straight-line.
Sandown at a glance
- Area
- Isle of Wight, England
- Highway authority
- Isle of Wight Council (local roads)
- Planning authority
- Isle of Wight Council
- Postcodes
- PO36, PO37, PO35 and PO38
- Guide price
- Typically £365–£1,245 per bollard + VAT (£435–£1,495 inc VAT for homes); minimum job £675
- Survey
- Free, with a fixed written quote
- Nearby
- Ryde (5.4 mi), Newport, Isle of Wight (6.7 mi), Cowes (9.7 mi)
What telescopic bollards cost in Sandown
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £365–£745 + VAT · £435–£885 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £635–£995 + VAT · £755–£1,195 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £905–£1,245 + VAT · £1,095–£1,495 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with cassette, supplied and installed; +6% for South East. Guide only — the fixed price follows a survey.
What Sandown sites use telescopic bollards for
Typical reasons Sandown sites choose telescopic bollards:
- Domestic driveways where the bollard is used daily
- Commercial yards where posts must not be left lying around
- Sites with no power for automatic bollards
Consents, ground and services in Sandown
In Sandown, work on adopted pavements and verges needs consent from Isle of Wight Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
If your site in Sandown is listed or inside a conservation area, check with the local planning authority (Isle of Wight Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Reinstatement matches the drive, whether block paving, tarmac, resin-bound or imprinted concrete. Positions are scanned and hand-dug before committing.
- Leave access for emergency services on commercial and multi-occupancy sites, and record who holds keys.
- If the drive is shared, agree positions and keys with the other users first.
What happens on site
Cut and excavate
The surface is cut neatly and the hole dug to the cassette's full depth plus a drainage layer, with care near any service that crosses the drive.
Set the cassette
The cassette is set vertical and its top exactly at finished surface level and fall, then concreted in. A cassette set high or low is a common cause of tyre damage and trip edges.
Reinstate and test
The surface is made good to match. The post is raised, locked, lowered and locked several times to confirm smooth operation, and keys are handed over.
Choosing the right spec
| Option | Detail |
|---|---|
| Finishes | Galvanised, powder-coated in common colours, or stainless steel to suit the frontage. |
| Lid and head designs | Flush hinged lids, removable caps or integrated heads that close the cassette top when lowered. |
| Lock types | Keyed cylinder locks, often with a cover to keep out dirt; keyed alike for multi-bay sites where one key should open every post. |
What moves the price in Sandown
Two Sandown jobs with the same number of posts can price quite differently. The usual reasons:
- Excavation depth and the presence of services under the drive
- Number of posts and keyed-alike locks
- Stainless or powder-coated finish
After installation
Lower and raise the bollard regularly, even if you rarely need to, so the mechanism stays free. Clear leaves and grit from around the lid, and a few times a year lift the post fully and look into the cassette for standing water or silt.
If posts in Sandown are later hit or damaged, we can repair or replace them — see bollard repairs.
Common questions
Do you install telescopic bollards in Sandown?
We cover all of Sandown (PO36, PO37, PO35 and PO38) and the rest of Isle of Wight. We also work in Ryde, Newport, Isle of Wight and Cowes.
Who gives permission for bollards on the pavement in Sandown?
In Sandown, work on adopted pavements and verges needs consent from Isle of Wight Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
How much do telescopic bollards cost in Sandown?
In Sandown, typically £365–£1,245 per bollard with cassette, supplied and installed, plus VAT (£435–£1,495 including VAT for homeowners), with a minimum job of £675 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
How deep does a telescopic bollard go into the ground?
Usually around the exposed height of the post plus the cassette base and drainage layer, which often comes to a metre or more. The exact depth depends on the model. That depth is why we check for services under the drive first.
Is a telescopic bollard harder to lift than a removable one?
Usually easier, because you only lift it up a short distance within its cassette and many models have lift assistance. You also never carry it or store it anywhere.