Moray · Scotland
Telescopic bollard installation in Elgin
Telescopic bollards for sites across Elgin and the rest of Moray, from the first measurement to the last relaid paving block.
Computer-generated imageElgin telescopic bollards
Because the post stays in its cassette, there is nothing to store and nothing to lose. In Elgin, that tends to mean sites such as community buildings, residential driveways and schools.
We cover Elgin's IV30 and IV31 postcode districts, including places such as Burghead, Hopeman, Lhanbryde and Duffus. Nearby, we also work in Forres (11.5 miles) and Nairn (21.3 miles), measured as the crow flies.
Local details
- Area
- Moray, Scotland
- Roads authority
- Moray Council (local roads)
- Planning authority
- Moray Council
- Postcodes
- IV30 and IV31
- Guide price
- Typically £345–£1,195 per bollard + VAT (£405–£1,445 inc VAT for homes); minimum job £645
- Survey
- Free, with a fixed written quote
What Elgin sites use telescopic bollards for
Typical reasons Elgin sites choose telescopic bollards:
- Allocated parking bays in flats and private developments
- Access roads closed outside working hours
- Car parks where a removable post would go missing
What telescopic bollards cost in Elgin
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £345–£705 + VAT · £405–£845 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £605–£955 + VAT · £725–£1,145 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £855–£1,195 + VAT · £1,045–£1,445 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with cassette, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Consents, ground and services in Elgin
In Scotland the council is the roads authority for local roads, which in Elgin means Moray Council. Telescopic bollards on an adopted footway need its consent; trunk roads sit with Transport Scotland.
If your site in Elgin is listed or inside a conservation area, check with the local planning authority (Moray Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Reinstatement matches the drive, whether block paving, tarmac, resin-bound or imprinted concrete. Positions are scanned and hand-dug before committing.
- Confirm the bollard is on your land; bollards on a public footway or dropped kerb need the roads authority's agreement.
- If the drive is shared, agree positions and keys with the other users first.
Installation, step by step
Check depth and drainage
The free site survey checks how far down we can dig, where services run under the drive and how the ground drains. If water will stand, a drain connection is priced into the fixed written quote.
Set the cassette
The cassette is set vertical and its top exactly at finished surface level and fall, then concreted in. A cassette set high or low is a common cause of tyre damage and trip edges.
Reinstate and test
The surface is made good to match. The post is raised, locked, lowered and locked several times to confirm smooth operation, and keys are handed over.
Choosing the right spec
| Option | Detail |
|---|---|
| Reflective bands | Bands near the top help drivers see a raised post at night, particularly on drives shared with visitors. |
| Lock types | Keyed cylinder locks, often with a cover to keep out dirt; keyed alike for multi-bay sites where one key should open every post. |
| Finishes | Galvanised, powder-coated in common colours, or stainless steel to suit the frontage. |
What affects the quote
Our Scotland guide prices are a starting point; the survey in Elgin firms them up. What tends to move them:
- Excavation depth and the presence of services under the drive
- Number of posts and keyed-alike locks
- Post size and whether lift assistance is wanted
After installation
Clear leaves and grit from around the lid, and a few times a year lift the post fully and look into the cassette for standing water or silt. Lubricate the lock with a suitable spray, especially before winter.
If posts in Elgin are later hit or damaged, we can repair or replace them — see bollard repairs.
Telescopic bollards in Elgin: FAQs
Which parts of Elgin do you cover for telescopic bollards?
We cover all of Elgin (IV30 and IV31) and the rest of Moray. We also work in Forres and Nairn.
Do I need consent for telescopic bollards on a public footway in Elgin?
In Scotland the council is the roads authority for local roads, which in Elgin means Moray Council. Telescopic bollards on an adopted footway need its consent; trunk roads sit with Transport Scotland.
What's a typical price for telescopic bollards in Elgin?
In Elgin, typically £345–£1,195 per bollard with cassette, supplied and installed, plus VAT (£405–£1,445 including VAT for homeowners), with a minimum job of £645 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
Can a telescopic bollard be fitted into a resin or imprinted drive?
Yes, though the cut has to be made cleanly and the surface patched around the lid. Resin and imprinted finishes are hard to match exactly, so we plan positions to keep visible patching small.
How deep does a telescopic bollard go into the ground?
Usually around the exposed height of the post plus the cassette base and drainage layer, which often comes to a metre or more. The exact depth depends on the model. That depth is why we check for services under the drive first.