Nottinghamshire · England
Telescopic bollard installation in Kirkby-in-Ashfield
Telescopic bollards for sites across Kirkby-in-Ashfield and the rest of Nottinghamshire, from the first measurement to the last relaid paving block.
Computer-generated imageKirkby-in-Ashfield telescopic bollards
We supply and fit telescopic bollards throughout Kirkby-in-Ashfield, typically for sites such as community car parks, community buildings and residential driveways. Key-locked telescopic bollards that retract into a ground cassette, for driveways, private bays and access roads.
We work across NG17 — Kirkby-in-Ashfield itself and places including Annesley Woodhouse. Jobs in Kirkby-in-Ashfield can be combined with work in Sutton-in-Ashfield (1.9 miles), Mansfield (2.9 miles), Hucknall (4.9 miles) and Alfreton (5.8 miles) (straight-line distances). Kirkby-in-Ashfield is about 11 miles from Nottingham.
Local details
- Area
- Nottinghamshire, England
- Highway authority
- Nottinghamshire County Council (local roads)
- Planning authority
- the council for Ashfield
- Postcodes
- NG17
- Guide price
- Typically £335–£1,195 per bollard + VAT (£395–£1,445 inc VAT for homes); minimum job £625
- Survey
- Free, with a fixed written quote
- Nearby
- Sutton-in-Ashfield (1.9 mi), Mansfield (2.9 mi), Hucknall (4.9 mi), Alfreton (5.8 mi)
Where telescopic bollards go in around Kirkby-in-Ashfield
Common uses in a place like Kirkby-in-Ashfield:
- Car parks where a removable post would go missing
- Sites with no power for automatic bollards
- Commercial yards where posts must not be left lying around
Kirkby-in-Ashfield: typical telescopic bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £335–£685 + VAT · £395–£815 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £585–£935 + VAT · £695–£1,095 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £835–£1,195 + VAT · £995–£1,445 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with cassette, supplied and installed; -2% for East Midlands. Guide only — the fixed price follows a survey.
Before we dig in Kirkby-in-Ashfield
In Kirkby-in-Ashfield, work on adopted pavements and verges needs consent from Nottinghamshire County Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
Many private-land installations in Kirkby-in-Ashfield need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at the council for Ashfield before posts go in.
Telescopic bollards need a deeper excavation than other manual bollards, so ground and services decide where they can go. Reinstatement matches the drive, whether block paving, tarmac, resin-bound or imprinted concrete.
- If the drive is shared, agree positions and keys with the other users first.
- Confirm the bollard is on your land; bollards on a public footway or dropped kerb need the highway authority's agreement.
Installation, step by step
Cut and excavate
The surface is cut neatly and the hole dug to the cassette's full depth plus a drainage layer, with care near any service that crosses the drive.
Form the drainage
A gravel soakaway is placed beneath the cassette, or a pipe is laid to a surface water drain or new soakaway.
Set the cassette
The cassette is set vertical and its top exactly at finished surface level and fall, then concreted in. A cassette set high or low is a common cause of tyre damage and trip edges.
Choosing the right spec
| Option | Detail |
|---|---|
| Diameter and height | Commonly around 90–140 mm diameter and 600–900 mm raised height, with larger posts for commercial use. |
| Lock types | Keyed cylinder locks, often with a cover to keep out dirt; keyed alike for multi-bay sites where one key should open every post. |
| Reflective bands | Bands near the top help drivers see a raised post at night, particularly on drives shared with visitors. |
What affects the quote
When we price telescopic bollards in Kirkby-in-Ashfield, these make the biggest difference:
- Surface type and quality of reinstatement
- Stainless or powder-coated finish
- Number of posts and keyed-alike locks
After installation
Lower and raise the bollard regularly, even if you rarely need to, so the mechanism stays free. If the post becomes stiff or will not lower fully, the usual causes are debris in the cassette or a blocked drain, both of which are easier to fix early than after the post has seized.
We can also service, repair or replace existing posts anywhere in Kirkby-in-Ashfield.
Common questions
Which parts of Kirkby-in-Ashfield do you cover for telescopic bollards?
We cover all of Kirkby-in-Ashfield (NG17) and the rest of Nottinghamshire. We also work in Sutton-in-Ashfield, Mansfield and Hucknall.
Do I need consent for telescopic bollards on a public footway in Kirkby-in-Ashfield?
Nottinghamshire County Council is the highway authority covering Kirkby-in-Ashfield's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
What's a typical price for telescopic bollards in Kirkby-in-Ashfield?
In Kirkby-in-Ashfield, typically £335–£1,195 per bollard with cassette, supplied and installed, plus VAT (£395–£1,445 including VAT for homeowners), with a minimum job of £625 plus VAT, using our East Midlands guide prices. The fixed figure comes in writing after we've seen the site.
How deep does a telescopic bollard go into the ground?
Usually around the exposed height of the post plus the cassette base and drainage layer, which often comes to a metre or more. The exact depth depends on the model. That depth is why we check for services under the drive first.
Why does my telescopic bollard fill with water?
Because the cassette is not draining, either through a blocked base, clay ground or no drainage provision at installation. Standing water rusts the post and can freeze it in place. Fixing the drainage usually solves the problem.
Telescopic bollards in nearby towns
- Sutton-in-Ashfield (1.9 mi)
- Mansfield (2.9 mi)
- Hucknall (4.9 mi)
- Alfreton (5.8 mi)
- Heanor (7.5 mi)
- Ripley (7.9 mi)