Shropshire · England
Telescopic bollard installation in Shrewsbury
Local installation of telescopic bollards in Shrewsbury — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageShrewsbury telescopic bollards
Because the post stays in its cassette, there is nothing to store and nothing to lose. In Shrewsbury, that tends to mean sites such as retail parks, business parks and housing association car parks.
Coverage in Shrewsbury takes in the SY1, SY2, SY3 and SY5 postcode districts and nearby places like Bayston Hill, Bicton, Pulley and Lythbank. Jobs in Shrewsbury can be combined with work in Wellington (9.9 miles) and Telford (12.9 miles) (straight-line distances). It sits roughly 28 miles from Wolverhampton as the crow flies.
Key facts for this area
- Area
- Shropshire, England
- Highway authority
- Shropshire Council (local roads)
- Planning authority
- Shropshire Council
- Postcodes
- SY1, SY2, SY3 and SY5
- Guide price
- Typically £345–£1,195 per bollard + VAT (£405–£1,445 inc VAT for homes); minimum job £645
- Survey
- Free, with a fixed written quote
- Nearby
- Wellington (9.9 mi), Telford (12.9 mi)
What telescopic bollards cost in Shrewsbury
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £345–£705 + VAT · £405–£845 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £605–£955 + VAT · £725–£1,145 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £855–£1,195 + VAT · £1,045–£1,445 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with cassette, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Telescopic bollards in Shrewsbury: common uses
Common uses in a place like Shrewsbury:
- Commercial yards where posts must not be left lying around
- Allocated parking bays in flats and private developments
- Sites with no power for automatic bollards
Consents, ground and services in Shrewsbury
The highway authority for local roads in Shrewsbury is Shropshire Council; motorways and trunk roads sit with National Highways. Telescopic bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
Many private-land installations in Shrewsbury need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at Shropshire Council before posts go in.
Positions are scanned and hand-dug before committing. Clay soils and high water tables mean a gravel base alone will not drain the cassette; a connection to a surface water drain or a separate soakaway is then needed, and foul drains are not used.
- Confirm the bollard is on your land; bollards on a public footway or dropped kerb need the highway authority's agreement.
- Leave access for emergency services on commercial and multi-occupancy sites, and record who holds keys.
Installation, step by step
Check depth and drainage
The free site survey checks how far down we can dig, where services run under the drive and how the ground drains. If water will stand, a drain connection is priced into the fixed written quote.
Set the cassette
The cassette is set vertical and its top exactly at finished surface level and fall, then concreted in. A cassette set high or low is a common cause of tyre damage and trip edges.
Reinstate and test
The surface is made good to match. The post is raised, locked, lowered and locked several times to confirm smooth operation, and keys are handed over.
Finishes and options
| Option | Detail |
|---|---|
| Standard or lift-assisted | Lift-assisted models use a spring or counterweight so the post rises with little effort, useful for daily domestic use. |
| Finishes | Galvanised, powder-coated in common colours, or stainless steel to suit the frontage. |
| Diameter and height | Commonly around 90–140 mm diameter and 600–900 mm raised height, with larger posts for commercial use. |
What affects the quote
When we price telescopic bollards in Shrewsbury, these make the biggest difference:
- Drainage: simple soakaway or a connection to a drain
- Excavation depth and the presence of services under the drive
- Number of posts and keyed-alike locks
After installation
If the post becomes stiff or will not lower fully, the usual causes are debris in the cassette or a blocked drain, both of which are easier to fix early than after the post has seized. Lubricate the lock with a suitable spray, especially before winter.
If posts in Shrewsbury are later hit or damaged, we can repair or replace them — see bollard repairs.
Common questions
Can you install telescopic bollards anywhere in Shrewsbury?
We cover all of Shrewsbury (SY1, SY2, SY3 and SY5) and the rest of Shropshire. We also work in Wellington and Telford.
Do I need consent for telescopic bollards on a public footway in Shrewsbury?
The highway authority for local roads in Shrewsbury is Shropshire Council; motorways and trunk roads sit with National Highways. Telescopic bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
What's a typical price for telescopic bollards in Shrewsbury?
In Shrewsbury, typically £345–£1,195 per bollard with cassette, supplied and installed, plus VAT (£405–£1,445 including VAT for homeowners), with a minimum job of £645 plus VAT, using our West Midlands guide prices. The fixed figure comes in writing after we've seen the site.
Is a telescopic bollard harder to lift than a removable one?
Usually easier, because you only lift it up a short distance within its cassette and many models have lift assistance. You also never carry it or store it anywhere.
Will a telescopic bollard stop my car being stolen?
It adds a physical barrier that a thief has to defeat before driving away, which slows them down and makes the car a less attractive target. It is one layer of protection, not a complete answer to keyless car theft.