Surrey · England
Telescopic bollard installation in Epsom
Telescopic bollards supplied and fitted in Epsom, Surrey: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageAbout telescopic bollards in Epsom
Because the post stays in its cassette, there is nothing to store and nothing to lose. In Epsom, that tends to mean sites such as local parades, small industrial units and schools.
We work across KT18 and KT19 — Epsom itself and places including Langley Vale and Worcester Park. We also cover neighbouring Ewell (1.6 miles), Banstead (2.8 miles), Kingston upon Thames (3.5 miles) and Leatherhead (3.6 miles) — distances are straight-line. Epsom is about 31 miles from Reading.
Epsom at a glance
- Area
- Surrey, England
- Highway authority
- Surrey County Council (local roads)
- Planning authority
- the council for Epsom and Ewell
- Postcodes
- KT18 and KT19
- Guide price
- Typically £365–£1,245 per bollard + VAT (£435–£1,495 inc VAT for homes); minimum job £675
- Survey
- Free, with a fixed written quote
- Nearby
- Ewell (1.6 mi), Banstead (2.8 mi), Kingston upon Thames (3.5 mi), Leatherhead (3.6 mi)
What Epsom sites use telescopic bollards for
Around Epsom, telescopic bollards usually solve one of these:
- Domestic driveways where the bollard is used daily
- Shared drives that need occasional closing
- Sites with no power for automatic bollards
Telescopic bollard prices in Epsom
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £365–£745 + VAT · £435–£885 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £635–£995 + VAT · £755–£1,195 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £905–£1,245 + VAT · £1,095–£1,495 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with cassette, supplied and installed; +6% for South East. Guide only — the fixed price follows a survey.
Permissions and groundwork in Epsom
The highway authority for local roads in Epsom is Surrey County Council; motorways and trunk roads sit with National Highways. Telescopic bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
If your site in Epsom is listed or inside a conservation area, check with the local planning authority (the council for Epsom and Ewell) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Drives commonly hide the water supply pipe, gas service, electric cable and drainage runs, often at shallow depth, and they cluster near the property boundary where posts are usually wanted. Positions are scanned and hand-dug before committing.
- Confirm the bollard is on your land; bollards on a public footway or dropped kerb need the highway authority's agreement.
- If the drive is shared, agree positions and keys with the other users first.
From survey to handover
Check depth and drainage
The free site survey checks how far down we can dig, where services run under the drive and how the ground drains. If water will stand, a drain connection is priced into the fixed written quote.
Form the drainage
A gravel soakaway is placed beneath the cassette, or a pipe is laid to a surface water drain or new soakaway.
Reinstate and test
The surface is made good to match. The post is raised, locked, lowered and locked several times to confirm smooth operation, and keys are handed over.
Specification choices
| Option | Detail |
|---|---|
| Standard or lift-assisted | Lift-assisted models use a spring or counterweight so the post rises with little effort, useful for daily domestic use. |
| Finishes | Galvanised, powder-coated in common colours, or stainless steel to suit the frontage. |
| Lid and head designs | Flush hinged lids, removable caps or integrated heads that close the cassette top when lowered. |
What moves the price in Epsom
Two Epsom jobs with the same number of posts can price quite differently. The usual reasons:
- Stainless or powder-coated finish
- Post size and whether lift assistance is wanted
- Excavation depth and the presence of services under the drive
After installation
Lubricate the lock with a suitable spray, especially before winter. Clear leaves and grit from around the lid, and a few times a year lift the post fully and look into the cassette for standing water or silt.
If posts in Epsom are later hit or damaged, we can repair or replace them — see bollard repairs.
Telescopic bollards in Epsom: FAQs
Can you install telescopic bollards anywhere in Epsom?
We cover all of Epsom (KT18 and KT19) and the rest of Surrey. We also work in Ewell, Banstead and Kingston upon Thames.
Who gives permission for bollards on the pavement in Epsom?
The highway authority for local roads in Epsom is Surrey County Council; motorways and trunk roads sit with National Highways. Telescopic bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
How much do telescopic bollards cost in Epsom?
In Epsom, typically £365–£1,245 per bollard with cassette, supplied and installed, plus VAT (£435–£1,495 including VAT for homeowners), with a minimum job of £675 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
Why does my telescopic bollard fill with water?
Because the cassette is not draining, either through a blocked base, clay ground or no drainage provision at installation. Standing water rusts the post and can freeze it in place. Fixing the drainage usually solves the problem.
Can a telescopic bollard be fitted into a resin or imprinted drive?
Yes, though the cut has to be made cleanly and the surface patched around the lid. Resin and imprinted finishes are hard to match exactly, so we plan positions to keep visible patching small.
Telescopic bollards in nearby towns
- Ewell (1.6 mi)
- Banstead (2.8 mi)
- Kingston upon Thames (3.5 mi)
- Leatherhead (3.6 mi)
- Sutton (4.6 mi)
- Esher (5 mi)