Surrey · England
Telescopic bollard installation in Sunbury-on-Thames
Telescopic bollards for sites across Sunbury-on-Thames and the rest of Surrey, from the first measurement to the last relaid paving block.
Computer-generated imageTelescopic bollards in Sunbury-on-Thames
We supply and fit telescopic bollards throughout Sunbury-on-Thames, typically for sites such as community car parks, local parades and small industrial units. Key-locked telescopic bollards that retract into a ground cassette, for driveways, private bays and access roads.
Coverage in Sunbury-on-Thames takes in the TW16 and TW17 postcode districts and nearby places like Ashford Common, Shepperton, Shepperton Green and Upper Halliford. Nearby, we also work in Walton-on-Thames (1.2 miles), Ashford, Surrey (2.5 miles), Esher (3.3 miles) and Staines (4.2 miles), measured as the crow flies. Sunbury-on-Thames is about 24 miles from Reading.
Sunbury-on-Thames at a glance
- Area
- Surrey, England
- Highway authority
- Surrey County Council (local roads)
- Planning authority
- the council for Spelthorne
- Postcodes
- TW16 and TW17
- Guide price
- Typically £395–£1,395 per bollard + VAT (£465–£1,645 inc VAT for homes); minimum job £735
- Survey
- Free, with a fixed written quote
- Nearby
- Walton-on-Thames (1.2 mi), Ashford, Surrey (2.5 mi), Esher (3.3 mi), Staines (4.2 mi)
Telescopic bollard prices in Sunbury-on-Thames
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £395–£805 + VAT · £465–£965 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £695–£1,095 + VAT · £825–£1,295 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £985–£1,395 + VAT · £1,195–£1,645 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with cassette, supplied and installed; +15% for London. Guide only — the fixed price follows a survey.
Telescopic bollards in Sunbury-on-Thames: common uses
Around Sunbury-on-Thames, telescopic bollards usually solve one of these:
- Commercial yards where posts must not be left lying around
- Domestic driveways where the bollard is used daily
- Sites with no power for automatic bollards
Before we dig in Sunbury-on-Thames
In Sunbury-on-Thames, work on adopted pavements and verges needs consent from Surrey County Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
If your site in Sunbury-on-Thames is listed or inside a conservation area, check with the local planning authority (the council for Spelthorne) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Clay soils and high water tables mean a gravel base alone will not drain the cassette; a connection to a surface water drain or a separate soakaway is then needed, and foul drains are not used. Drives commonly hide the water supply pipe, gas service, electric cable and drainage runs, often at shallow depth, and they cluster near the property boundary where posts are usually wanted.
- If the drive is shared, agree positions and keys with the other users first.
- Confirm the bollard is on your land; bollards on a public footway or dropped kerb need the highway authority's agreement.
From survey to handover
Cut and excavate
The surface is cut neatly and the hole dug to the cassette's full depth plus a drainage layer, with care near any service that crosses the drive.
Form the drainage
A gravel soakaway is placed beneath the cassette, or a pipe is laid to a surface water drain or new soakaway.
Set the cassette
The cassette is set vertical and its top exactly at finished surface level and fall, then concreted in. A cassette set high or low is a common cause of tyre damage and trip edges.
Options to consider
| Option | Detail |
|---|---|
| Reflective bands | Bands near the top help drivers see a raised post at night, particularly on drives shared with visitors. |
| Diameter and height | Commonly around 90–140 mm diameter and 600–900 mm raised height, with larger posts for commercial use. |
| Lid and head designs | Flush hinged lids, removable caps or integrated heads that close the cassette top when lowered. |
Pricing telescopic bollards in Sunbury-on-Thames
Two Sunbury-on-Thames jobs with the same number of posts can price quite differently. The usual reasons:
- Surface type and quality of reinstatement
- Excavation depth and the presence of services under the drive
- Number of posts and keyed-alike locks
Keeping them working
Lower and raise the bollard regularly, even if you rarely need to, so the mechanism stays free. If the post becomes stiff or will not lower fully, the usual causes are debris in the cassette or a blocked drain, both of which are easier to fix early than after the post has seized.
For damaged or loose posts in Sunbury-on-Thames, repairs and replacements are priced in writing first.
Questions about telescopic bollards in Sunbury-on-Thames
Which parts of Sunbury-on-Thames do you cover for telescopic bollards?
We cover all of Sunbury-on-Thames (TW16 and TW17) and the rest of Surrey. We also work in Walton-on-Thames, Ashford, Surrey and Esher.
Do I need consent for telescopic bollards on a public footway in Sunbury-on-Thames?
Surrey County Council is the highway authority covering Sunbury-on-Thames's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
How much do telescopic bollards cost in Sunbury-on-Thames?
In Sunbury-on-Thames, typically £395–£1,395 per bollard with cassette, supplied and installed, plus VAT (£465–£1,645 including VAT for homeowners), with a minimum job of £735 plus VAT, using our London guide prices. The fixed figure comes in writing after we've seen the site.
Can a telescopic bollard be fitted into a resin or imprinted drive?
Yes, though the cut has to be made cleanly and the surface patched around the lid. Resin and imprinted finishes are hard to match exactly, so we plan positions to keep visible patching small.
What if it freezes in winter?
Freezing usually means water is standing in the cassette. Do not force the post; pour warm, not boiling, water around the lid and lift once free. Then have the drainage checked.
Telescopic bollards in nearby towns
- Walton-on-Thames (1.2 mi)
- Ashford, Surrey (2.5 mi)
- Esher (3.3 mi)
- Staines (4.2 mi)
- Hounslow (4.5 mi)
- Egham (6.1 mi)