Swansea · Wales
Telescopic bollard installation in Gorseinon
Local installation of telescopic bollards in Gorseinon — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageTelescopic bollards in Gorseinon
From high street shopfronts, community buildings and filling-station forecourts, Gorseinon has plenty of places where telescopic bollards earn their keep. Because the post stays in its cassette, there is nothing to store and nothing to lose.
We cover Gorseinon's SA4 postcode district, including places such as Pontarddulais, Penllergaer, Pen-clawdd and Three Crosses. Jobs in Gorseinon can be combined with work in Llanelli (5.2 miles), Swansea (5.4 miles), Clydach (6.1 miles) and Ammanford (8.8 miles) (straight-line distances). Gorseinon is about 5 miles from Swansea.
Gorseinon at a glance
- Area
- Swansea, Wales
- Highway authority
- Swansea Council (local roads)
- Planning authority
- Swansea Council
- Postcodes
- SA4
- Guide price
- Typically £335–£1,145 per bollard + VAT (£395–£1,345 inc VAT for homes); minimum job £625
- Survey
- Free, with a fixed written quote
Typical telescopic bollards jobs in Gorseinon
Around Gorseinon, telescopic bollards usually solve one of these:
- Access roads closed outside working hours
- Commercial yards where posts must not be left lying around
- Shared drives that need occasional closing
Telescopic bollard prices in Gorseinon
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £335–£685 + VAT · £395–£815 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £585–£925 + VAT · £695–£1,095 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £825–£1,145 + VAT · £985–£1,345 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with cassette, supplied and installed; -3% for Wales. Guide only — the fixed price follows a survey.
Before we dig in Gorseinon
Before digging near the kerb in Gorseinon we establish who owns the ground: adopted footways are Swansea Council's responsibility, trunk roads the Welsh Government's, and everything else belongs to the site owner.
If your site in Gorseinon is listed or inside a conservation area, check with the local planning authority (Swansea Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Drives commonly hide the water supply pipe, gas service, electric cable and drainage runs, often at shallow depth, and they cluster near the property boundary where posts are usually wanted. Clay soils and high water tables mean a gravel base alone will not drain the cassette; a connection to a surface water drain or a separate soakaway is then needed, and foul drains are not used.
- Confirm the bollard is on your land; bollards on a public footway or dropped kerb need the highway authority's agreement.
- Leave access for emergency services on commercial and multi-occupancy sites, and record who holds keys.
What happens on site
Check depth and drainage
The free site survey checks how far down we can dig, where services run under the drive and how the ground drains. If water will stand, a drain connection is priced into the fixed written quote.
Cut and excavate
The surface is cut neatly and the hole dug to the cassette's full depth plus a drainage layer, with care near any service that crosses the drive.
Form the drainage
A gravel soakaway is placed beneath the cassette, or a pipe is laid to a surface water drain or new soakaway.
Choosing the right spec
| Option | Detail |
|---|---|
| Finishes | Galvanised, powder-coated in common colours, or stainless steel to suit the frontage. |
| Lock types | Keyed cylinder locks, often with a cover to keep out dirt; keyed alike for multi-bay sites where one key should open every post. |
| Standard or lift-assisted | Lift-assisted models use a spring or counterweight so the post rises with little effort, useful for daily domestic use. |
Pricing telescopic bollards in Gorseinon
Two Gorseinon jobs with the same number of posts can price quite differently. The usual reasons:
- Number of posts and keyed-alike locks
- Post size and whether lift assistance is wanted
- Drainage: simple soakaway or a connection to a drain
Looking after them
Lower and raise the bollard regularly, even if you rarely need to, so the mechanism stays free. Clear leaves and grit from around the lid, and a few times a year lift the post fully and look into the cassette for standing water or silt.
For damaged or loose posts in Gorseinon, repairs and replacements are priced in writing first.
Common questions
Which parts of Gorseinon do you cover for telescopic bollards?
We cover all of Gorseinon (SA4) and the rest of Swansea. We also work in Llanelli, Swansea and Clydach.
Who gives permission for bollards on the pavement in Gorseinon?
In Gorseinon the highway authority for local roads is Swansea Council. We confirm whether the ground is adopted highway before quoting, because telescopic bollards on a public footway need its agreement first.
How much do telescopic bollards cost in Gorseinon?
In Gorseinon, typically £335–£1,145 per bollard with cassette, supplied and installed, plus VAT (£395–£1,345 including VAT for homeowners), with a minimum job of £625 plus VAT, using our Wales guide prices. The fixed figure comes in writing after we've seen the site.
Why does my telescopic bollard fill with water?
Because the cassette is not draining, either through a blocked base, clay ground or no drainage provision at installation. Standing water rusts the post and can freeze it in place. Fixing the drainage usually solves the problem.
Will a telescopic bollard stop my car being stolen?
It adds a physical barrier that a thief has to defeat before driving away, which slows them down and makes the car a less attractive target. It is one layer of protection, not a complete answer to keyless car theft.
Telescopic bollards in nearby towns
- Llanelli (5.2 mi)
- Swansea (5.4 mi)
- Clydach (6.1 mi)
- Ammanford (8.8 mi)
- Neath (10.2 mi)
- Port Talbot (11.8 mi)